Re: gnomemeeting
Le Fri, 10 Dec 2004 17:00:08 +0100
Debian User <lfrancois-os@tiscali.fr> a écrit:
>
> > http://www.hifocus.net/phpBB/viewtopic-7518-0.html
> >
> Premierement comment avez-vous fait pour trouver ces sites tres
> interessant?
>
> Quels mots clés avez-vous utilisé, en bref?
Quelque chose comme "Diva 2430 SE NAT" ou analogue...
>
>
> J'y suis allé j'ai fait la manip:
>
> Ces firmwares utilisent un routage NAT mais par défaut le "Default NAT
> Server" est sur l'adresse IP 192.168.1.2 (celle de votre PC).
> Pour le vérifier :
> # telnet 192.168.1.1"
>
> Trying 192.168.1.1...
> Connected to 192.168.1.1.
> Escape character is '^]'.
> Welcome to Diva 2430 SE ADSL Modem 1.2.7 LSF
> Copyright Eicon Networks Corporation 2001
>
> -->SHOW IP NAT
> NAT Static Mappings Table
> ===============
> # Protocol Port Server
> -- -------- ---- ------
> 1 tcp 23 192.168.1.2
> 2 tcp 80 192.168.1.2
> 3 udp 69 192.168.1.2
> ===============
>
.....
>
En cherchant un peu plus on trouve une liste de commande qui serait celle
en fin de message.
A noter dedans ENABLE IP NAT, ADD IP NAT et HELP
Donc je suggère un petit ENABLE IP NAT puis test. Si ça ne marche pas,
HELP ou HELP ADD IP NAT
puis éventuellement
ADD IP NAT 1720
ADD IP NAT 5000
ADD IP NAT 5001
... jusqu'à 5007 et de 5010 à 5013 (cf message de Daniel)
Bon courage, le succès n'est pas loin je pense
François Boisson
Liste des commandes du Modem via telnet d'après
http://www.google.fr/search?q=cache:xC7NJoHj9UoJ:www.hifocus.net/phpBB/View8265_150.html+Diva+2430+SE+SHOW+IP+NAT&hl=fr
-------------------
ADD DHCP STATICMAP
ADD ETHERNET FILTER
ADD IP FILTER
ADD IP NAT
ADD LOG
CLEAR TRACES
CONNECT
DELETE DHCP STATICMAP
DELETE FILTER
DELETE IP NAT
DIR
DISABLE AUTORESET
DISABLE BRIDGE SPANNINGTREE
DISABLE DHCP STATICMAP
DISABLE ECHO SERVER
DISABLE FILTER
DISABLE IP DIALONDEMAND
DISABLE IP NAT
DISABLE LOG MODULE
DISABLE LOG OUTPUT
DISABLE PPP CLEARTEXT AUTHENT~
DISABLE PPP ECHO REQUEST
DISABLE PPP IDLE TIMEOUT
DISABLE SCROLL BREAK
DISABLE SYSMAN
DISABLE TFTP SERVER
DISABLE TIMEPROTOCOL
DISCONNECT
ENABLE AUTORESET
ENABLE BRIDGE SPANNINGTREE
ENABLE DHCP STATICMAP
ENABLE ECHO SERVER
ENABLE FILTER
ENABLE IP DIALONDEMAND
ENABLE IP NAT
ENABLE LOG MODULE
ENABLE LOG OUTPUT
ENABLE PPP CLEARTEXT AUTHENTI~
ENABLE PPP ECHO REQUEST
ENABLE PPP IDLE TIMEOUT
ENABLE SCROLL BREAK
ENABLE SYSMAN
ENABLE TFTP SERVER
ENABLE TIMEPROTOCOL
EXIT
GET TFTP FILE
HELP
LOGOUT
MAIL TRACE FREEZE
MAIL TRACE RELEASE
MAIL TRACE START
MAIL TRACE UNFREEZE
PING
PROFILE
PUT TFTP FILE
RESET
RESET FACTORY
SAVE
SET ADSL MODULATION TYPE
SET ATM SERVICE CATEGORY
SET ATM VC
SET BRIDGE AGINGTIME
SET BRIDGE STP FORWARDDELAY
SET BRIDGE STP HELLOTIME
SET BRIDGE STP MAXAGE
SET BRIDGE STP PORT PATHCOST
SET BRIDGE STP PORT PRIORITY
SET BRIDGE STP PRIORITY
SET DATE
SET DHCP DNS
SET DHCP DOMAIN
SET DHCP IPRANGE
SET DHCP LEASEDURATION
SET DHCP STATICMAP
SET DHCP TYPE
SET FILTER
SET IP ADDRESS
SET IP DEFAULT GATEWAY
SET IP DNS1
SET IP DNS2
SET IP MASK
SET IP NAT DEFAULT
SET LOG FILTER
SET PASSWORD
SET PORT HTTP
SET PORT TELNET
SET PPP ECHO REQUEST INTERVAL
SET PPP IDLE TIMEOUT
SET PPP LOCAL PASSWORD
SET PPP LOCAL USERNAME
SET PPP MAX CONFIGURE
SET PPP MAX FAILURE
SET PPP MAX TERMINATE
SET PPP MRU
SET PPP RESTARTDELAY
SET PPPOE SERVICE
SET PROFILE NAME
SET PROFILE TYPE
SET TIME
SET TIMEPROTOCOL SERVER
SET TIMEPROTOCOL ZONE
SET VDMZ MASK
SHOW ADSL CONFIGURATION
SHOW ADSL STATISTICS
SHOW ATM CONFIGURATION
SHOW ATM VC
SHOW BRIDGE CONFIGURATION
SHOW BRIDGE STATISTICS
SHOW BRIDGE TABLE
SHOW DATE
SHOW DHCP CONFIGURATION
SHOW DHCP STATICMAP
SHOW DHCP STATUS
SHOW ETHERNET STATISTICS
SHOW FILTER
SHOW IP ADDRESS
SHOW IP CONFIGURATION
SHOW IP NAT
SHOW IP STATISTICS
SHOW IP STATUS
SHOW LOG
SHOW LOG PLUS
SHOW PORT HTTP
SHOW PORT TELNET
SHOW PPP CONFIGURATION
SHOW PPP SERVICE
SHOW PROFILES
SHOW SAR CONFIGURATION
SHOW SAR VC
SHOW SAR VC TABLE
SHOW SYSTEM STATUS
SHOW TIME
SHOW TIMEPROTOCOL CONFIGURATI~
SHOW TRACE
SHOW VERSION
START TRACE
STOP TRACE
LAN
Reply to: