Gravure de CD lente et très peu stable.
Bonjour la liste,
j'ai fait hier l'acquisition d'un graveur de CD/DVD Plextor
PX-708A. La version du firmware est la (1.07), la machine où ce graveur
est installé est un duron 900 Mhz équipé de 450 Mo de RAM. Un debian
sid tourne dessus. Ce graveur est censé gravé en 40X et malheureusement
ce n'est pas du tout les résultats que j'atteins. Avec mon ancien graveur
(Ricoh 12x) je n'avais aucun problème. Mais avec le nouveau j'obtiens une
vitesse moyenne de gravure de 3X :-/. J'aimerai donc savoir ce qui peut
influer sur les performances à ce point. Pour plus d'informations, je
vais vous paster la sortie d'un cdrecord et mon fichier de config:
Sortie cdrecord:
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'DVDR PX-708A '
Revision : '1.07'
Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support
code. cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details
on DVD support. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC FORCESPEED SINGLESESSION
HIDECDR Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R Drive buf size : 1190112 = 1162 KB
FIFO size : 67108864 = 65536 KB
Track 01: audio 35 MB (03:32.37) no preemp pad Track 02: audio 33 MB
(03:17.32) no preemp pad Track 03: audio 35 MB (03:32.00) no preemp pad
Track 04: audio 37 MB (03:42.40) no preemp pad Track 05: audio 34 MB
(03:23.44) no preemp pad Track 06: audio 31 MB (03:07.50) no preemp pad
Track 07: audio 36 MB (03:37.88) no preemp pad Track 08: audio 34 MB
(03:22.39) no preemp pad Track 09: audio 42 MB (04:12.68) no preemp pad
Track 10: audio 31 MB (03:07.45) no preemp pad Track 11: audio 37 MB
(03:41.17) no preemp pad Track 12: audio 26 MB (02:39.28) no preemp
Track 13: audio 34 MB (03:22.38) no preemp Track 14: audio 28 MB
(02:47.48) no preemp Track 15: audio 39 MB (03:55.34) no preemp Track
16: audio 29 MB (02:55.17) no preemp Track 17: audio 36 MB (03:38.65)
no preemp Track 18: audio 24 MB (02:23.81) no preemp Track 19: audio
33 MB (03:21.24) no preemp Track 20: audio 34 MB (03:22.12) no preemp
Track 21: audio 29 MB (02:56.14) no preemp Total size: 713 MB
(70:38.40) = 317880 sectors Lout start: 713 MB (70:40/30) = 317880
sectors Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of
lead in: -11933 (97:22/67) ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar) Manuf.
index: 43
Manufacturer: Acer Media Technology, Inc. Single session is OFF.
Hide CDR is OFF.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 41969
Forcespeed is OFF.
Power-Rec is ON.
Power-Rec write speed: 40x (recommended) Starting to write CD/DVD at
speed 40 in real TAO mode for single session. Last chance to quit,
starting real write 0 seconds. Operation starts. Waiting for reader
process to fill input buffer ... input buffer ready. BURN-Free is OFF.
Turning BURN-Free on Performing OPC...
Starting new track at sector: 0
Track 01: 35 of 35 MB written (fifo 99%) [buf 34%] 14.4x. WARNING:
padding up to secsize.
Track 01: Total bytes read/written: 37463040/37465008 (15929 sectors).
Starting new track at sector: 16081
Track 02: 33 of 33 MB written (fifo 99%) [buf 50%] 14.0x. WARNING:
padding up to secsize.
Track 02: Total bytes read/written: 34808832/34809600 (14800 sectors).
<snip>
Track 21: 29 of 29 MB written (fifo 100%) [buf 46%] 14.2x. Track 21:
Total bytes read/written: 31072272/31072272 (13211 sectors). Writing
time: 1301.527s
Average write speed 3.3x.
Min drive buffer fill was 0%
Total of 26 possible drive buffer underruns predicted. Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 FF FF D3 EB 0A 00 00 00 00 02 00 00 00 Sense Key:
0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0x00 (no seek complete)
Fru 0x0 Sense flags: Blk -11285 (valid)
cmd finished after 313.575s timeout 480s cmd finished after 313.575s
timeout 480s cdrecord: Cannot fixate disk.
Fixating time: 313.576s
Last selected write speed: 40x
Max media write speed: 40x
Last actual write speed: 4x
BURN-Free was 336 times used.
cdrecord: fifo had 11672 puts and 11672 gets. cdrecord: fifo was 0 times
empty and 1786 times full, min fill was 98%.
Fichier de config de cdrecord:
CDR_DEVICE=plextor
CDR_SPEED=40
CDR_FIFOSIZE=64m
mmc= 0,0,0 -1 -1 burnfree teac= 1,3,0
-1 -1 burnfree panasonic= 1,4,0 -1 -1 burnfree
plextor= 0,0,0 -1 -1 burnfree sanyo= 1,4,0
-1 -1 burnfree yamaha= 1,5,0 -1 -1 burnfree
cdrom= 0,6,0 2 1m ""
Le passage d'une piste à l'autre lors de l'écriture est plutôt long. Je
ne comprend absolument pas d'où mon problème peut venir, ma machine
est-elle trop lente ? Dois-je passer un paramètre approprié à la ligne
de commande ?
Merci pour votre aide.
Bonne journée.
--
Nicolas Cavigneaux | GPG KeyID : F0954C41
bounga@altern.org | http://bounga.ath.cx
Reply to: