Re: ISDN - PCI 128000 Olitec
DERNIERE VERSION DEBIAN CHARGE SUR LE DISQUE 2.4.9 : (le résultat etant lr
meme avec 2.2.17pre21, 2.2.19pre21 et 2.2.19)
-----------
Linux version 2.4.9 (root@lotus) (gcc version 2.95.4 20010810 (Debian
prerelease)) #1 Wed Sep 5 14:51:31 CEST 2001 recompilation avec modif
"pci_ids.h" pour prise en compte de la carte OLITEC à la place de la gazel
R753 . Le choix du processeur 386.
----------------------------------------------------
----------------------------------------------------
MISE EN PLACE DISQUE ET CARTE OLITEC RNIS PCI 128000 SUR L'ORDI PENTIUM
500MHz
----------------------------------------------------
----------------------------------------------------
COMMANDE lspci SUR ORDI PENTIUM 500MHz :
--------------
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:0d.0 Network controller: PLX Technology, Inc.: Unknown device 1187 (rev
01)
00:11.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
01:00.0 VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 02)
-----------------------------------------------------
Contenu de /proc/pci SUR ORDI PENTIUM 500MHz :
--------------
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev
3).
Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xf0000000 [0xf3ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 3).
Master Capable. Latency=64. Min Gnt=136.
Bus 0, device 7, function 0:
ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
Master Capable. Latency=64.
I/O at 0xf000 [0xf00f].
Bus 0, device 7, function 2:
USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
IRQ 11.
Master Capable. Latency=64.
I/O at 0xe000 [0xe01f].
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 2).
IRQ 9.
Bus 0, device 13, function 0:
Network controller: PCI device 10b5:1187 (PLX Technology, Inc.) (rev 1).
IRQ 10.
Non-prefetchable 32 bit memory at 0xf4000000 [0xf400007f].
I/O at 0xe400 [0xe47f].
I/O at 0xe800 [0xe807].
Bus 0, device 17, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev
0).
IRQ 11.
I/O at 0xec00 [0xec1f].
Bus 1, device 0, function 0:
VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 2).
Master Capable. Latency=64. Min Gnt=4.Max Lat=255.
Non-prefetchable 32 bit memory at 0xe8000000 [0xebffffff].
--------------------------------------------------
CONTENU de /proc/ioports SUR ORDI PENTIUM 500MHz :
----------------
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0213-0213 : isapnp read
02f8-02ff : serial(set)
0320-0323 : wd7000
0350-0353 : wd7000
03c0-03df : vga+
03f0-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
4000-403f : Intel Corporation 82371AB PIIX4 ACPI
5000-501f : Intel Corporation 82371AB PIIX4 ACPI
d000-dfff : PCI Bus #01
e000-e01f : Intel Corporation 82371AB PIIX4 USB
e400-e47f : PCI device 10b5:1187 (PLX Technology, Inc.)
e800-e807 : PCI device 10b5:1187 (PLX Technology, Inc.)
ec00-ec1f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
ec00-ec1f : ne2k-pci
f000-f00f : Intel Corporation 82371AB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
------------------------------------------------------------
une commande modprobe hisax avec les options type=34 protocol=2 dans
/etc/modules.conf ne pose aucun problème et la carte est en service
----------------------------
----------------------------------------------------
----------------------------------------------------
TRANSFERT DU DISQUE ET CARTE OLITEC RNIS PCI 128000 SUR L'ORDI PACKARD BELL
75MHz
----------------------------------------------------
----------------------------------------------------
COMMANDE lspci SUR ORDI PACKARD BELL 75MHz :
--------------
00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev
02)
00:07.0 ISA bridge: Intel Corporation 82371FB PIIX ISA [Triton I] (rev 02)
00:08.0 VGA compatible controller: Cirrus Logic GD 5434-8 [Alpine] (rev fc)
00:11.0 Network controller: PLX Technology, Inc.: Unknown device 1187 (rev
01)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
-----------------------------------------------------
Contenu de /proc/pci SUR ORDI PACKARD BELL 75MHz :
--------------
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 2).
Master Capable. Latency=64.
Bus 0, device 7, function 0:
ISA bridge: Intel Corporation 82371FB PIIX ISA [Triton I] (rev 2).
Bus 0, device 8, function 0:
VGA compatible controller: Cirrus Logic GD 5434-8 [Alpine] (rev 252).
Non-prefetchable 32 bit memory at 0xfe000000 [0xfeffffff].
Bus 0, device 17, function 0:
Network controller: PCI device 10b5:1187 (PLX Technology, Inc.) (rev 1).
IRQ 10.
Non-prefetchable 32 bit memory at 0xfffbfc00 [0xfffbfc7f].
I/O at 0xfc80 [0xfcff].
I/O at 0xfff0 [0xfff7].
Bus 0, device 19, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev
0).
IRQ 11.
I/O at 0xff80 [0xff9f].
--------------------------------------------------
CONTENU de /proc/ioports SUR ORDI PACKARD BELL 75MHz :
----------------
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0320-0323 : wd7000
0350-0353 : wd7000
0376-0376 : ide1
03c0-03df : vga+
03f0-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
0cf8-0cff : PCI conf1
fc80-fcff : PCI device 10b5:1187 (PLX Technology, Inc.)
ff80-ff9f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
ff80-ff9f : ne2k-pci
fff0-fff7 : PCI device 10b5:1187 (PLX Technology, Inc.)
------------------------------------------------------------
une commande modprobe hisax avec les options type=34 protocol=2 dans
/etc/modules.conf PLANTE LE PROCESSEUR APRES AVOIR ECRIT A L'ECRAN :
...
Gazel: PCI card automatic recognition
Gazel: Card PCI R753 found
Gazel: config irq:10 ipac:0xFFF0 cfg:0xFC80
----- ET POF, C'EST PLANTE, IL N'Y A PLUS QU'A APPUYER SUR LE BOUTON POUR
REDEMARRER-------
----------------------------
Reply to: