lector de targetes memòria
Tinc un lector de targetes de memòria que no aconsegueixo accedir-hi des de
Debian. Crec que en l'arrencada se'l reconeix com un dispositiu usb, però no
sé com muntar-lo per accedir als fitxers (és una sd amb fotografies).
Adjunto el que em surt al dmesg amb usb i USB per si ajuda:
dmesg | grep USB:
Initializing USB Mass Storage driver...
USB Mass Storage support registered.
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 3-0:1.0: USB hub found
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
usb 2-1: new full speed USB device using address 2
usb 2-2: new full speed USB device using address 3
scsi4 : SCSI emulation for USB Mass Storage devices
Vendor: IC Model: USB Storage-CFC Rev: 322E
Vendor: IC Model: USB Storage-SMC Rev: 322E
Vendor: IC Model: USB Storage-MMC Rev: 322E
Vendor: IC Model: USB Storage-MSC Rev: 322E
USB Mass Storage device found at 3
usb 2-3: new low speed USB device using address 4
usb 1-3: new full speed USB device using address 2
usb 1-3: new full speed USB device using address 3
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.1-3
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
dmesg | grep usb:
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver usb-storage
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
usb 2-1: new full speed USB device using address 2
usb 2-2: new full speed USB device using address 3
usb 2-3: new low speed USB device using address 4
usb 1-3: new full speed USB device using address 2
usb 1-3: device not accepting address 2, error -110
usb 1-3: new full speed USB device using address 3
usb 1-3: device not accepting address 3, error -110
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.1-3
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
No aconsegueixo veure un nom de dispositiu amb el qual muntar-lo amb "mount".
Algú sap com fer-ho?
Ricard
Reply to: