Silo and Raid1
Hi,
I installed Sarge on the /dev/sda1 only.
After, I created the raid1:
#fdisk /dev/sda :
Disk /dev/sda (Sun disk label): 64 heads, 32 sectors, 17274 cylinders
Units = cylinders of 2048 * 512 bytes
Device Flag Start End Blocks Id System
/dev/sda1 0 954 976896 83 Linux native
/dev/sda2 954 17274 16711680 fd Linux raid autodetect
/dev/sda3 0 17274 17688576 5 Whole disk
#fdisk /dev/sdb:
Disk /dev/sdb (Sun disk label): 19 heads, 248 sectors, 7508 cylinders
Units = cylinders of 4712 * 512 bytes
Device Flag Start End Blocks Id System
/dev/sdb1 u 0 415 977740 82 Linux swap
/dev/sdb2 415 7508 16711108 fd Linux raid autodetect
/dev/sdb3 0 7508 17688848 5 Whole disk
#mdadm --create /dev/md0 --level 1 --raid-devices=2 /dev/sda2 /dev/sdb2
#cat /proc/mdstat :
Personalities : [raid1]
md0 : active raid1 sda2[0] sdb2[1]
16711040 blocks [2/2] [UU]
unused devices: <none>
#mdadm --detail --scan >> /etc/mdadm/mdadm.conf
#mkfs.ext3 /dev/md0
#mount /dev/md0 /mnt/md0
#mount /dev/sda1 /mnt/sda1
#rsync -a /mnt/sda1 /mnt/md0
#chroot /mnt/md0
#vi /etc/silo.conf:
partition=1
default=Linux
read-only
timeout=100
image=/boot/vmlinuz
root=/dev/sda1
label=Linux
initrd=/boot/initrd.img
image=/boot/vmlinuz
append="md=0,/dev/sda2,/dev/sdb2"
root=/dev/md0
label=LinuxRaid
initrd=/boot/initrd.img
#vi /etc/fstab:
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sdb1 none swap sw 0 0
/dev/md0 / ext3 defaults,errors=remount-ro 0 1
/dev/scd0 /media/cdrom0 iso9660 ro,user,noauto 0 0
#silo
#exit
#umount /mnt
#reboot
And I have the message with kernel-image-2.6.8-sparc64-SMP:
SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 35378533 512-byte hdwr sectors (18114 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host0/bus0/target1/lun0: p1 p2 p3
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 12x/12x xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
pKernel panic: Attempted to kill init!
<0>Press L1-A to return to the boot prom
ivot_root: No such file or directory
/sbin/init: 432: cannot open dev/console: No such file
What's the problem ?
--
Cordialement,
Sébastien LANGE
_(__)_
Secrétaire d'Ornix '-e e -'__,--.__)
(°> Groupe d'utilisateur (o_o) )
//\ des logiciels libres \. /___. |
V_/_ dans l'Orne ||| )/ )/
http://ornix.org //_(/_(/_(
Registered Linux-User #313144
Sun Ultra 80 UPA/PCI (4 X UltraSPARC-II 450MHz), No Keyboard
OpenBoot 3.23, 2048 MB memory installed.
Boot device: /pci@1f,4000/scsi@3/disk@0,0:a File and args:
SILO Version 1.4.9
boot: LinuxRaid
Allocated 8 Megs of memory at 0x40000000 for kernel
Uncompressing image...
Loaded kernel version 2.6.8
Loading initial ramdisk (3194880 bytes at 0xC00000 phys, 0x40C00000 virt)...
Remapping the kernel... done.
Booting Linux..
PROMLIB: Sun IEEE Boot Prom 3.23.0 1999/06/30 13:53
Linux version 2.6.8-2-sparc64 (dilinger@june.internal) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Wed Mar 23 04:23:37 EST 2005
ARCH: SUN4U
Ethernet address: 08:00:20:f0:0b:51
Built 1 zonelists
Kernel command line: root=/dev/md0 ro md=0,/dev/sda2,/dev/sdb2
PID hash table entries: 4096 (order 12: 65536 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
Memory: 2071680k available (1992k kernel code, 600k data, 152k init) [fffff80000000000,000000007ff02000]
Calibrating delay loop... 897.02 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 3120k freed
NET: Registered protocol family 16
PCI: Probing for controllers.
PCI: Found PSYCHO, control regs at 000001fe00000000
PSYCHO: Shared PCI config space at 000001fe01000000
PCI-IRQ: Routing bus[ 0] slot[ 1] map[0] to INO[21]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[10]
PCI-IRQ: Routing bus[ 0] slot[ 3] map[0] to INO[20]
PCI-IRQ: Routing bus[ 0] slot[ 3] map[0] to INO[26]
PCI-IRQ: Routing bus[ 0] slot[ 4] map[0] to INO[18]
PCI0(PBMB): Bus running at 33MHz
PCI-IRQ: Routing bus[80] slot[ 1] map[0] to INO[00]
PCI0(PBMA): Bus running at 33MHz
ebus0: [auxio] [power] [SUNW,pll] [sc] [se] [su] [su] [ecpp] [fdthree] [eeprom] [flashprom] [SUNW,CS4231]
power: Control reg at 000001fff1724000 ... powerd running.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Console: switching to mono PROM 80x34
rtc_init: no PC rtc found
su0 at 0x000001fff13062f8 (irq = 4,7ea) is a 16550A
su1 at 0x000001fff13083f8 (irq = 9,7e9) is a 16550A
ttyS0 at MMIO 0x1fff1400000 (irq = 7125984) is a SAB82532 V3.2
ttyS1 at MMIO 0x1fff1400040 (irq = 7125984) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)
Using anticipatory io scheduler
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: Sun Mouse on su/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 1048576 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3120 blocks [1 disk] into ram disk...done.
VFS: Mounted root (cramfs filesystem) readonly.þinitrd-tools: 0.1.81.1
SCSI subsystem initialized
sym0: <875> rev 0x14 at pci 0001:00:03.0 irq 4,7e0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
Vendor: SEAGATE Model: ST318404LSUN18G Rev: 4207
Type: Direct-Access ANSI SCSI revision: 03
sym0:0:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:0:0): Beginning Domain Validation
sym0:0: wide asynchronous.
sym0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
scsi(0:0:0:0): Ending Domain Validation
Vendor: FUJITSU Model: MAJ3182M SUN18G Rev: 0804
Type: Direct-Access ANSI SCSI revision: 02
sym0:1:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:1:0): Beginning Domain Validation
sym0:1: wide asynchronous.
sym0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
scsi(0:0:1:0): Ending Domain Validation
Vendor: PIONEER Model: CD-ROM DR-U12X Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
scsi(0:0:6:0): Beginning Domain Validation
sym0:6: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 15)
scsi(0:0:6:0): Domain Validation skipping write tests
scsi(0:0:6:0): Ending Domain Validation
sym1: <875> rev 0x14 at pci 0001:00:03.1 irq 4,7e6
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.1.18j
sunhme.c:v2.02 24/Aug/2003 David S. Miller (davem@redhat.com)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:f0:0b:51
8139too Fast Ethernet driver 0.9.27
eth1: RealTek RTL8139 at 0x1ff80018000, 00:0e:2e:64:61:fd, IRQ 7125120
SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 35378533 512-byte hdwr sectors (18114 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host0/bus0/target1/lun0: p1 p2 p3
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 12x/12x xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
pKernel panic: Attempted to kill init!
<0>Press L1-A to return to the boot prom
ivot_root: No such file or directory
/sbin/init: 432: cannot open dev/console: No such file
Reply to: