bug / mistake bug 61076
On the related PC there is up to now no mailer installed. Therefor I'm
worrying if my report was sent and has arrived the buglist.
----------------------------------------------
I'm not able to configure lilo for the actual installation.
Hardware:
Three SCSI HD's with three different systems which should be started
simultaniously.
First HD SCSI ID=0; 4,5 GB SEAGATE ; Sarge (testing) with Kernel 2.4
Second HD SCSI ID=2; 16GB SEAGATE; FreeBSD 4.10
Third HD SCSI ID=3; 4,4GB Maxtor: Sarge (testing) with Kernel 2.6
Each system can be started easily selecting the individual HD by BIOS.
I can not addjust LILO on the first disk to start each system. I tried few
variants, changing the bootpartition /dev/sda, /dev/sda1. Installing lilo
on the third (last) HD resulted in quite the same problem.
Bevor I had SuSE 8.1 (ID=0) respectivly 9.1 (ID=3) installed. Installing
of lilo was no problem. Unfortunately I can not say what version of lilo I
used. I had to edit /etc/lilo.conf and run /sbin/lilo
----------------------------------------------
boot="/dev/sda"
lba32
prompt
timeout="10000"
root=/dev/sda1
# linear
delay=0
lock
vga="Frage"
default=linux
image="/boot/vmlinuz-2.4.26-1-386"
label="Sarge 2.4"
root="/boot/vmlinuz-2.4.26-1-386"
# read-only
initrd="/boot/initrd.img-2.4.26-1-386"
vga="Standar"
other=/dev/sdb1
label="FreeBSD 4.10"
other=/dev/sdc1
label="Sarge 2.6"
-----------------------------------------------------------------------
Die Einstellungen sind nicht in Ordnung. Ausgabe von LILO:
LILO version 22.5.9 (test mode), Copyright (C) 1992-1998 Werner Almesberger
Development beyond version 21 Copyright (C) 1999-2004 John Coffman
Released 08-Apr-2004, and compiled at 15:30:00 on Aug 15 2004
Debian GNU/Linux
Reading boot sector from /dev/sda
Warning: '/proc/partitions' does not match '/dev' directory structure.
Name change: '/dev/scsi/host0/bus0/target1/lun0/disc' -> '/dev/sda'
Name change: '/dev/scsi/host0/bus0/target1/lun0/part1' -> '/dev/sda1'
Name change: '/dev/scsi/host0/bus0/target1/lun0/part2' -> '/dev/sda2'
Name change: '/dev/scsi/host0/bus0/target1/lun0/part5' -> '/dev/sda5'
Name change: '/dev/scsi/host0/bus0/target1/lun0/part6' -> '/dev/sda6'
Name change: '/dev/scsi/host0/bus0/target1/lun0/part7' -> '/dev/sda7'
Name change: '/dev/scsi/host0/bus0/target1/lun0/part8' -> '/dev/sda8'
Name change: '/dev/scsi/host0/bus0/target1/lun0/part9' -> '/dev/sda9'
Name change: '/dev/scsi/host0/bus0/target2/lun0/disc' -> '/dev/sdb'
Name change: '/dev/scsi/host0/bus0/target2/lun0/part1' -> '/dev/sdb1'
Name change: '/dev/scsi/host0/bus0/target2/lun0/part5' -> '/dev/sdb5'
Name change: '/dev/scsi/host0/bus0/target2/lun0/part6' -> '/dev/sdb6'
Name change: '/dev/scsi/host0/bus0/target2/lun0/part7' -> '/dev/sdb7'
Name change: '/dev/scsi/host0/bus0/target2/lun0/part8' -> '/dev/sdb8'
Name change: '/dev/scsi/host0/bus0/target2/lun0/part9' -> '/dev/sdb9'
Name change: '/dev/scsi/host0/bus0/target2/lun0/part10' -> '/dev/sdb10'
Name change: '/dev/scsi/host0/bus0/target3/lun0/disc' -> '/dev/sdc'
Name change: '/dev/scsi/host0/bus0/target3/lun0/part1' -> '/dev/sdc1'
Name change: '/dev/scsi/host0/bus0/target3/lun0/part2' -> '/dev/sdc2'
Name change: '/dev/scsi/host0/bus0/target3/lun0/part5' -> '/dev/sdc5'
Using MENU secondary loader
Calling map_insert_data
Fatal: Not a number: "Standar"
Reply to: