Re: 43p-140 install issues
On Monday 10 January 2005 11:44, Sven Luther wrote:
> On Mon, Jan 10, 2005 at 11:27:02AM +0100, Philippe Guyot wrote:
> > On Thursday 06 January 2005 15:33, you wrote:
> > > On Thursday 06 January 2005 14:57, you wrote:
> > > > On Thu, Jan 06, 2005 at 12:19:46PM +0100, Philippe Guyot wrote:
> > > > > On Wednesday 05 January 2005 12:41, you wrote:
> > > > > > On Wed, Jan 05, 2005 at 10:31:35AM +0100, Philippe Guyot wrote:
> > > > > > > On Tuesday 04 January 2005 19:21, you wrote:
> > > > > > > > Ok, so you got a 43P-140 (Tiger1), good to know.
> > > > > > > >
> > > > > > > >
> > > > > > > > I only have trouble with device 0000:00:01.1, which is the
> > > > > > > > SL82C105 ide chip, but as i have no connector for those
> > > > > > > > anyway, it is not troublesomoe.
> > > > > > >
> > > > > > > I think this box hasn't a real ide device, as far as I can see.
> > > > > > > disks, cdrom,tape are on scsi.
> > > > > >
> > > > > > Ah, but then what are those other devices ?
> > > > >
> > > > > If this can help, output of lspci:
> > > > > > > > > PCI: Cannot allocate resource region 0 of device
> > > > > > > > > 0000:00:0b.0
> > > > >
> > > > > 00:0b.0 ISA bridge: IBM Fire Coral (rev 03)
> > > > >
> > > > > > > > > PCI: Cannot allocate resource region 0 of device
> > > > > > > > > 0000:00:0c.0
> > > > >
> > > > > 00:0c.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970
> > > > > [PCnet LANCE] (rev 16)
> > > > >
> > > > > > > > > PCI: Cannot allocate resource region 0 of device
> > > > > > > > > 0000:00:10.0
> > > > >
> > > > > 00:10.0 SCSI storage controller: LSI Logic / Symbios Logic
> > > > > (formerly NCR)
> > > >
> > > > So these three are baddly mapped, at least
> > > >
> > > > > > > > > PCI: Cannot allocate resource region 1 of device
> > > > > > > > > 0000:00:12.0 PCI: Cannot allocate resource region 2 of
> > > > > > > > > device 0000:00:12.0
> > > > >
> > > > > 53c825 (rev 13)
> > > > > 00:12.0 Communication controller: Synaptel: Unknown device 0111
> > > > > (rev b1)
> > > >
> > > > No idea why there are two ressource regions here though. No idea whay
> > > > this synaptel part is anyway.
> > >
> > > This is an X25 communication card.
> > > It seems make no problem for woody when booting.
> > > I don't really have plans to use it, I may remove it from the box.
> >
> > So did I.
> > I tested again this morning, netbooting
> > /~luther/d-i/images/daily/powerpc/netboot/vmlinuz-prep.initrd (08 jan
> > 22:01).
> >
> > as previously, mapping problem it seems:
> >
> > PCI: Cannot allocate resource region 0 of device 0000:00:0b.0
> > PCI: Cannot allocate resource region 0 of device 0000:00:0c.0
> > PCI: Cannot allocate resource region 0 of device 0000:00:10.0
> >
> > of course those errors disapear because of synaptel out of the box:
> > > > > > PCI: Cannot allocate resource region 1 of device 0000:00:12.0
> > > > > > PCI: Cannot allocate resource region 2 of device 0000:00:12.0
>
> As expected.
>
> > and the same final VFS problem:
> >
> > RAMDISK: Compressed image found at block 0
> > VFS: Mounted root (cramfs filesystem) readonly.
> > VFS: Cannot open root device "<NULL>" or unknown-block(8,3)
> > Please append a correct "root=" boot option
> > Kernel panic: VFS: Unable to mount root fs on unknown-block(8,3)
> > <0>Rebooting in 180 seconds..
> >
> > Just for testing purposes, if it could help a little
> >
> > linux/ppc load: console=ttyS0,9600 root=/dev/sda2 (woody)
> > VFS: Cannot open root device "sda2"
>
> What kernel was that again ?
/~luther/d-i/images/daily/powerpc/netboot/vmlinuz-prep.initrd (08 jan
22:01).
> I think you have a serious pci irq mapping
> trouble, which need to be fixed. Could you investigate this with the prep
> knowledgeable guys on this list ?
Will be happy to do that with the help of other persons
Friendly,
Felipe
Reply to: