XFree86 don't works on eMac

[mammique <mammique@lamenagerie.com>]

Hi, i can't make XFree86 working on my sister's new eMac, 2.4.X didn't
work because of readonfb modes (only offb worked), i had to enable it
manualy with via ssh, using fbset. I tried 2.6.2-rc3-ben1 wich works
well with radeonfb (i have randomly problems during mousedev probing at
boot, i'll check it later), but Xfree86 don't want Option "UseFBDev",
wich i think must be set, is it a config (Modelines ? I didn't set any)
or a Linux/Xfree86 incompatibility ?

Regards.

# cat /proc/cpuinfo
processor       : 0
cpu             : 7455, altivec supported
clock           : 999MHz
revision        : 3.3 (pvr 8001 0303)
bogomips        : 993.28
machine         : PowerMac4,4
motherboard     : PowerMac4,4 MacRISC3 Power Macintosh
detected as     : 80 (eMac)
pmac flags      : 00000001
L2 cache        : 256K unified
memory          : 256MB
pmac-generation : NewWorld



# lspci
00:0b.0 Host bridge: Apple Computer Inc. UniNorth 1.5 AGP
00:10.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW
[Radeon 7500]
01:0b.0 Host bridge: Apple Computer Inc. UniNorth 1.5 PCI
01:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
01:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
01:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
02:0b.0 Host bridge: Apple Computer Inc. UniNorth 1.5 Internal PCI
02:0e.0 Class ffff: Lucent Microelectronics FW323 (rev ff)
02:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM)
(rev 01)



# uname -a
Linux Mizoumisou 2.6.2-rc3-ben1 #1 Tue Feb 3 15:38:36 CET 2004 ppc
GNU/Linux



# fbset
 
mode "1280x960-72"
    # D: 122.249 MHz, H: 72.081 kHz, V: 71.937 Hz
    geometry 1280 960 1280 960 8
    timings 8180 272 48 38 1 96 3
    hsync high
    vsync high
    rgba 8/0,8/0,8/0,0/0
endmode



# X
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/Mizoumisou:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
 
This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
 
XFree86 Version 4.3.99.12 (DRI trunk)
Release Date: 10 September 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.0-test11-benh ppc [ELF]
Current Operating System: Linux Mizoumisou 2.6.2-rc3-ben1 #1 Tue Feb 3
15:38:36 CET 2004 ppc
Build Date: 04 December 2003
Changelog Date: 10 September 2003
        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Feb  3 17:22:10 2004
(==) Using config file: "/etc/X11/XF86Config-4"
Skipping
"/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping
"/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping
"/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
Skipping
"/usr/X11R6/lib/modules-dri-trunk/fonts/libspeedo.a:spencode.o":  No
symbols found
(EE) RADEON(0): FBIOPUT_VSCREENINFO: Invalid argument
 
Fatal server error:
AddScreen/ScreenInit failed for driver 0
 
 
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to debian-x@lists.debian.org.

-- 
mammique <mammique@lamenagerie.com>