Re: Xfree86 error on Mac G4 with DVI LCD monitor
Thanks, but that file does not help, it is for a different computer and
video card altogether.
> em..and the file is here :)
>
> ### BEGIN DEBCONF SECTION
> # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
> # Debian X Configuration tool, using values from the debconf database.
> #
> # Edit this file with caution, and see the XF86Config-4 manual page.
> # (Type "man XF86Config-4" at the shell prompt.)n
> #
> # If you want your changes to this file preserved by dexconf, only make
> changes
> # before the "### BEGIN DEBCONF SECTION" line above, and/or after the
> # "### END DEBCONF SECTION" line below.
>
> Section "Files"
> FontPath "unix/:7110" # local X-TT font server
> FontPath "unix/:7100" # local font server
> # if the local font server has problems, we can fall back on these
> # FontPath "/usr/lib/X11/fonts/misc"
> # FontPath "/usr/lib/X11/fonts/cyrillic"
> # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> # FontPath "/usr/lib/X11/fonts/Type1"
> # FontPath "/usr/lib/X11/fonts/Speedo"
> # FontPath "/usr/lib/X11/fonts/100dpi"
> # FontPath "/usr/lib/X11/fonts/75dpi"
> # FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
> # FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
> EndSection
>
> Section "Module"
> Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "pex5"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> Load "xie"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "us_intl"
> # Option "XkbModel" "macintosh"
> # Option "XkbLayout" "us"
> # Option "XkbLayout" "pt_BR"
> # Option "xkb_symbols" "deadkeys"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Device"
> Identifier "Apple PowerBook G4"
> Driver "ati"
> Option "UseFBDev"
> EndSection
>
> Section "Monitor"
> Identifier "Apple PowerBook G4 Widescreen"
> HorizSync 30-100
> VertRefresh 50-160
> Option "DPMS"
> Option "ForceCRT2Type" "SVIDEO"
> Option "TVStandard" "PAL"
> Modeline "1152x768" 64.995 1152 1213 1349 1472 768 771 777 806 -HSync -VSync
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "Apple PowerBook G4"
> Monitor "Apple PowerBook G4 Widescreen"
> DefaultDepth 16
> SubSection "Display"
> Depth 1
> Modes "1152x768"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1152x768"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1152x768"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1152x768"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1152x768"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1152x768"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
> ### END DEBCONF SECTION
>
> You --> Daniel Weinstein <debian@spaceshoe.com> ,were going on about -->
>
>> I have a Power Mac G4 400mHz AGP, with an ATI Rage 128 Pro Video card.
>> It is connected to a Planar CT1904Z LCD display, through the DVI port.
>>
>> I've installed debian unstable with XFree86 Version 4.3.0.1
>>
>> Any time I try to load the Xserver either by GDM or manually, it crashes and
>> gives me an error dialog. Does anyone have a working configuration or know
>> how I can get mine working?
>>
>> Below are excerpts from my etc/X11/XF86Config-4 and /var/log/XFree86.0.log
>> Let me know if I should post the whole config file or log.
>>
>> <clip>
>>
>> Section "Device"
>> Identifier "ATI Rage 128 Pro"
>> Driver "ati"
>> EndSection
>> Section "Monitor"
>> Identifier "Planar CT1904Z"
>> HorizSync 30-80
>> VertRefresh 50-75
>> # Option "DPMS"
>> EndSection
>> Section "Screen"
>> Identifier "Default Screen"
>> Device "ATI Rage 128 Pro"
>> Monitor "Planar CT1904Z"
>> DefaultDepth 24
>> SubSection "Display"
>> Depth 1
>> Modes "1280x1024" "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 4
>> Modes "1280x1024" "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 8
>> Modes "1280x1024" "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 15
>> Modes "1280x1024" "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 16
>> Modes "1280x1024" "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 24
>> Modes "1280x1024" "800x600" "640x480"
>> EndSubSection
>> EndSection
>> Section "ServerLayout"
>> Identifier "Default Layout"
>> Screen "Default Screen"
>> InputDevice "Generic Keyboard"
>> InputDevice "Configured Mouse"
>> EndSection
>> Section "DRI"
>> Mode 0666
>> EndSection
>>
>>
>>
>>
>> <clip>
>>
>> XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-4 20040529030435
>>
>> <clip>
>>
>> (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
>>
>> <clip>
>>
>> (II) ATI: ATI driver (version 6.5.5) for chipset: ati
>> (II) R128: Driver for ATI Rage 128 chipsets:
>> <clip>
>>
>> (II) Primary Device is: PCI 00:10:0
>> (II) ATI: Candidate "Device" section "ATI Rage 128 Pro".
>> (--) Assigning device section with no busID to primary device
>> (--) Chipset ATI Rage 128 Pro GL PF (AGP) found
>> (II) Loading sub module "r128"
>> (II) LoadModule: "r128"
>> (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
>> (II) Module r128: vendor="The XFree86 Project"
>> compiled for 4.3.0.1, module version = 4.0.1
>> Module class: XFree86 Video Driver
>> ABI class: XFree86 Video Driver, version 0.6
>>
>> <clip>
>>
>> (II) Setting vga for screen 0.
>> (II) Loading sub module "vgahw"
>> (II) LoadModule: "vgahw"
>> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
>> (II) Module vgahw: vendor="The XFree86 Project"
>> compiled for 4.3.0.1, module version = 0.1.0
>> ABI class: XFree86 Video Driver, version 0.6
>> (II) R128(0): PCI bus 0 card 16 func 0
>> (**) R128(0): Depth 24, (--) framebuffer bpp 32
>> (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
>> (==) R128(0): Default visual is TrueColor
>> (==) R128(0): RGB weight 888
>> (II) R128(0): Using 8 bits per RGB (8 bit DAC)
>> (II) Loading sub module "int10"
>> (II) LoadModule: "int10"
>> (II) Reloading /usr/X11R6/lib/modules/libint10.a
>> (II) R128(0): initializing int10
>> (II) R128(0): No legacy BIOS found -- trying PCI
>> (EE) R128(0): Cannot read V_BIOS (5)
>> (--) R128(0): Chipset: "ATI Rage 128 Pro GL PF (AGP)" (ChipID = 0x5046)
>> (--) R128(0): Linear framebuffer at 0x94000000
>> (--) R128(0): MMIO registers at 0x90000000
>> (--) R128(0): BIOS at 0x90020000
>> (--) R128(0): VideoRAM: 16384 kByte (64-bit SDR SGRAM 1:1)
>> (**) R128(0): Using external CRT for display
>> (WW) R128(0): Video BIOS not detected in PCI space!
>> (WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
>> (WW) R128(0): Video BIOS not found!
>> (WW) R128(0): Can't determine panel dimensions, and none specified.
>> Disabling programming of FP registers.
>> (II) R128(0): PLL parameters: rf=2950 rd=31 min=12500 max=25000; xclk=14000
>> (II) Loading sub module "ddc"
>> (II) LoadModule: "ddc"
>> (II) Reloading /usr/X11R6/lib/modules/libddc.a
>> (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
>> (II) Loading sub module "i2c"
>> (II) LoadModule: "i2c"
>> (II) Loading /usr/X11R6/lib/modules/libi2c.a
>> (II) Module i2c: vendor="The XFree86 Project"
>> compiled for 4.3.0.1, module version = 1.2.0
>> ABI class: XFree86 Video Driver, version 0.6
>> (II) R128(0): I2C bus "DDC" initialized.
>> (II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
>> (II) R128(0): I2C device "DDC:ddc2" removed.
>> (EE) R128(0): No DFP detected
>> (II) R128(0): Planar CT1904Z: Using hsync range of 30.00-80.00 kHz
>> (II) R128(0): Planar CT1904Z: Using vrefresh range of 50.00-75.00 Hz
>> (II) R128(0): Clock range: 12.50 to 250.00 MHz
>>
>> <clip>
>>
>> Fatal server error:
>> Caught signal 7. Server aborting
>>
>>
>>
>>
>> --
>> To UNSUBSCRIBE, email to debian-powerpc-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>>
>
Reply to: