Xfree86 error on Mac G4 with DVI LCD monitor
I have a Power Mac G4 400mHz AGP, with an ATI Rage 128 Pro Video card.
It is connected to a Planar CT1904Z LCD display, through the DVI port.
I've installed debian unstable with XFree86 Version 4.3.0.1
Any time I try to load the Xserver either by GDM or manually, it crashes and
gives me an error dialog. Does anyone have a working configuration or know
how I can get mine working?
Below are excerpts from my etc/X11/XF86Config-4 and /var/log/XFree86.0.log
Let me know if I should post the whole config file or log.
<clip>
Section "Device"
Identifier "ATI Rage 128 Pro"
Driver "ati"
EndSection
Section "Monitor"
Identifier "Planar CT1904Z"
HorizSync 30-80
VertRefresh 50-75
# Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Rage 128 Pro"
Monitor "Planar CT1904Z"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
<clip>
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-4 20040529030435
<clip>
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
<clip>
(II) ATI: ATI driver (version 6.5.5) for chipset: ati
(II) R128: Driver for ATI Rage 128 chipsets:
<clip>
(II) Primary Device is: PCI 00:10:0
(II) ATI: Candidate "Device" section "ATI Rage 128 Pro".
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Pro GL PF (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
<clip>
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) R128(0): PCI bus 0 card 16 func 0
(**) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/libint10.a
(II) R128(0): initializing int10
(II) R128(0): No legacy BIOS found -- trying PCI
(EE) R128(0): Cannot read V_BIOS (5)
(--) R128(0): Chipset: "ATI Rage 128 Pro GL PF (AGP)" (ChipID = 0x5046)
(--) R128(0): Linear framebuffer at 0x94000000
(--) R128(0): MMIO registers at 0x90000000
(--) R128(0): BIOS at 0x90020000
(--) R128(0): VideoRAM: 16384 kByte (64-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=31 min=12500 max=25000; xclk=14000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) R128(0): I2C device "DDC:ddc2" removed.
(EE) R128(0): No DFP detected
(II) R128(0): Planar CT1904Z: Using hsync range of 30.00-80.00 kHz
(II) R128(0): Planar CT1904Z: Using vrefresh range of 50.00-75.00 Hz
(II) R128(0): Clock range: 12.50 to 250.00 MHz
<clip>
Fatal server error:
Caught signal 7. Server aborting
Reply to: