On Sun, 29 Feb 2004 the mental interface of
David 'fenrus' Syk told:
> Elimar Riesebieter wrote:
>
[...]
> >>/etc/init.d/pcmcia start
> >>Starting PCMCIA services: cardmgr[1477]: no sockets found!
> >>done.
> >Is yenta_socket loaded?
[...]
> compiled yenta_socket as module and loaded it with no success,
> first i tried with my modified config.opts, then with the default one;
>
> [dmesg]
>
> Yenta: CardBus bridge found at 0001:01:1a.0 [0000:0000]
> Yenta: Enabling burst memory read transactions
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta: ISA IRQ mask 0x0000, PCI irq 58
> Socket status: 30000106
> yenta_cardbus: probe of 0001:01:1a.0 failed with error -22
> bus pci: remove driver yenta_cardbus
> /* here i modprobe'd -r yenta_socket */
>
>
> bus pci: add driver yenta_cardbus
> Yenta: CardBus bridge found at 0001:01:1a.0 [0000:0000]
> yenta 0001:01:1a.0: Preassigned resource 0 busy, reconfiguring...
> yenta 0001:01:1a.0: no resource of type 1200 available, trying to
> continue...
> yenta 0001:01:1a.0: Preassigned resource 1 busy, reconfiguring...
> yenta 0001:01:1a.0: no resource of type 200 available, trying to continue...
> yenta 0001:01:1a.0: Preassigned resource 2 busy, reconfiguring...
> yenta 0001:01:1a.0: no resource of type 100 available, trying to continue...
> yenta 0001:01:1a.0: Preassigned resource 3 busy, reconfiguring...
> yenta 0001:01:1a.0: no resource of type 100 available, trying to continue...
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta: ISA IRQ mask 0x0000, PCI irq 58
> Socket status: 30000106
> yenta_cardbus: probe of 0001:01:1a.0 failed with error -22
It seemd to be that you can not share IRQ's. This can be enabled
somewhere in the kernel. This is only a unprofessional guess ;-)
Definetly there is a ressource reserved by an application which
needs yenta.
Ciao
Elimar
--
The way to source is always uphill!
-unknown-
Attachment:
signature.asc
Description: Digital signature