SOS : Some Post Installation Problems of Debian on iMac
Hello Everyone,
I have the iMac with processor PowerPC G3, 400 MHz machine with a Apple USB keyboard, Mitsumi Apple USB Mouse (it has a single button), and display ATY Rage 128K and 8M VRam.
I have installed Debian 3.0 (Woody) on it, and I have the following problems :
1. The mouse is not detected, neither by the gpm nor by X
2. X does not start : there is a complete blank screen and nothing happens after sometime. However, one is ale to switch to other terminals, so that the machine does not hang.
I have included for your reference the output from dmesg, the /etc/X11/XF86Config-4 file, the /etc/gpm.conf file, the error message from the Xserver and the status of different devices (psaux, mouse, gpmdata, input/mice)
Thanking you,
--
Partha Pratim Ghosh
-----------------------------------------------------------
Post Doctoral Fellow
Topology and Category Theory Research Group
Department of Mathematics and Applied Mathematics
University of Cape Town
Rondebosch 7701
Cape Town
South Africa
Telephone : (0)27-21-6504527
e-mail : pghosh@maths.uct.ac.za
vsatsxc@cal.vsnl.net.in
Home Page : http://www.topos.netfirms.com
-----------------------------------------------------------
"Mathematics is a game, play it..."
"Algebra : Analysis :: Anatomy : Physiology"
"... only algebra is dull and only topology is boring, it is
their mixture that is interesting..."
------------------------------------------------------------
Memory BAT mapping: BAT2=128Mb, BAT3=64Mb, residual: 0Mb
Total memory = 192MB; using 1024kB for hash table (at c0300000)
Linux version 2.4.18-newpmac (root@voltaire) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Thu Mar 14 22:44:49 EST 2002
Found Uninorth memory controller & host bridge, revision: 7
Found a Keylargo mac-io controller, rev: 2, mapped at 0xfdf7f000
Processor NAP mode on idle enabled.
PowerMac motherboard: iMac FireWire
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
PMU driver 2 initialized for Core99, firmware: 0c
On node 0 totalpages: 49152
zone(0): 49152 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda7 ro
PowerMac using OpenPIC irq controller
OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc731000
OpenPIC timer frequency is 4.166666 MHz
GMT Delta read from XPRAM: 120 minutes, DST: off
via_calibrate_decr: ticks per jiffy = 249676 (1498056 ticks)
Console: colour dummy device 80x25
Calibrating delay loop... 797.90 BogoMIPS
Memory: 189164k available (1828k kernel code, 948k data, 284k init, 0k highmem)
AGP special page: 0xcbfff000
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Fixup res 1 (101) of dev 00:10.0: 400 -> 802400
PCI->OF bus map:
0 -> 0
1 -> 0
2 -> 0
PCI:00:10.0: Resource 0: 94000000-97ffffff (f=1208)
PCI:00:10.0: Resource 2: 90000000-90003fff (f=200)
PCI:01:17.0: Resource 0: 80000000-8007ffff (f=200)
PCI:02:0f.0: Resource 0: f5200000-f53fffff (f=200)
PCI:00:10.0: Resource 1: 00802400-008024ff (f=101)
PCI:01:18.0: Resource 0: 80081000-80081fff (f=200)
PCI:01:19.0: Resource 0: 80080000-80080fff (f=200)
PCI:02:0e.0: Resource 0: f5000000-f5000fff (f=200)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Thermal assist unit using timers, shrink_timer: 200 jiffies
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
PCI: Enabling device 00:10.0 (0086 -> 0087)
aty128fb: Rage128 RL (AGP) [chip rev 0x2] 8M 64-bit SDR SGRAM (2:1)
Console: switching to colour frame buffer device 128x48
fb0: ATY Rage128 frame buffer device on PCI
input0: Macintosh mouse button emulation
pty: 256 Unix98 ptys configured
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port cfc at c00f5598
IN from bad port c000 at c00f56ac
IN from bad port c100 at c00f56ac
IN from bad port c200 at c00f56ac
IN from bad port c300 at c00f56ac
IN from bad port c400 at c00f56ac
IN from bad port c500 at c00f56ac
IN from bad port c600 at c00f56ac
IN from bad port c700 at c00f56ac
IN from bad port c800 at c00f56ac
IN from bad port c900 at c00f56ac
IN from bad port ca00 at c00f56ac
IN from bad port cb00 at c00f56ac
IN from bad port cc00 at c00f56ac
IN from bad port cd00 at c00f56ac
IN from bad port ce00 at c00f56ac
IN from bad port cf00 at c00f56ac
pmac_ide: enabling IDE bus ID 2
pmac_ide: enabling IDE bus ID 0
pmac_ide: enabling IDE bus ID 1
hda: Maxtor 91024U2, ATA DISK drive
hdb: MATSHITADVD-ROM SR-8184, ATAPI CD/DVD-ROM drive
ide0 at 0xd088a000-0xd088a007,0xd088a160 on irq 19
hda: Enabling Ultra DMA 2
ide_pmac: Set UDMA timing for mode 2, reg: 0x1090038c
hda: 19941264 sectors (10210 MB) w/2048KiB Cache, CHS=19783/16/63, UDMA(33)
hdb: Enabling MultiWord DMA 2
ide_pmac: MDMA, cycleTime: 120, accessTime: 75, recTime: 45
ide_pmac: Set MDMA timing for mode 2, reg: 0x0001978c
hdb: ATAPI 24X DVD-ROM drive, 512kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14
loop: loaded (max 8 devices)
eth0: GMAC at 00:30:65:74:93:f6, driver v1.5k4
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
Macintosh non-volatile memory driver v1.0
apm_emu: APM Emulation 0.5 initialized.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Enabling device 01:18.0 (0000 -> 0002)
usb-ohci.c: USB OHCI at membase 0xcd821000, IRQ 27
usb-ohci.c: usb-01:18.0, Apple Computer Inc. KeyLargo USB
adb: starting probe task...
adb: finished probe task...
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:19.0 (0000 -> 0002)
usb-ohci.c: USB OHCI at membase 0xcd823000, IRQ 28
usb-ohci.c: usb-01:19.0, Apple Computer Inc. KeyLargo USB (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usb_mouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 284k init 8k chrp 36k prep
hub.c: USB new device connect on bus1/1, assigned device number 2
input1: Mitsumi Apple USB Mouse on usb1:2.0
hub.c: USB new device connect on bus2/1, assigned device number 2
hub.c: USB hub found
hub.c: 3 ports detected
Adding Swap: 184312k swap-space (priority -1)
hub.c: USB new device connect on bus2/1/1, assigned device number 3
input2: Mitsumi Electric Apple USB Keyboard on usb2:3.0
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
BlueZ HCI Core ver 1.1 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ HCI USB driver ver 1.0 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
usb.c: registered new driver hci_usb
IN from bad port 25e at cd84d8e0
IN from bad port 29e at cd84d8e0
IN from bad port 2de at cd84d8e0
IN from bad port 31e at cd84d8e0
IN from bad port 35e at cd84d8e0
IN from bad port 39e at cd84d8e0
DoubleTalk PC - not found
macserial: serial modem detected
PowerMac Z8530 serial driver version 2.0
tty00 at 0xcd85b020 (irq = 22) is a Z8530 ESCC (internal modem)
tty01 at 0xcd862000 (irq = 50) is a Z8530 ESCC
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
NET4: AppleTalk 0.18a for Linux NET4.0
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
bluetooth.c: USB Bluetooth support registered
usb.c: registered new driver bluetooth
bluetooth.c: USB Bluetooth tty driver v0.12
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,11), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hfs_fs: WARNING: mounting unclean filesystem.
usb-uhci.c: $Revision: 1.275 $ time 23:12:55 Mar 14 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
eth0: PHY ID: 0x00406212
eth0: Found Broadcom BCM5201 PHY
eth0: Link state change, phy_status: 0x782d
eth0: Link up ! BCM5201/5221 aux_stat: 0x003c
eth0: Full Duplex: 0, Speed: 10
usb-uhci.c: $Revision: 1.275 $ time 23:12:55 Mar 14 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
eth0: no IPv6 routers present
IN from bad port 7be at cd92c978
IN from bad port 7be at cd92c9fc
IN from bad port 3bd at cd92a3e8
IN from bad port 3bd at cd92a400
IN from bad port 3bd at cd92a410
IN from bad port 3bd at cd92a464
IN from bad port 3be at cd92c7c8
IN from bad port 3bc at cd92c880
IN from bad port 77a at cd92c978
IN from bad port 77a at cd92c9fc
IN from bad port 379 at cd92a3e8
IN from bad port 379 at cd92a400
IN from bad port 379 at cd92a410
IN from bad port 379 at cd92a464
IN from bad port 379 at cd92a3e8
IN from bad port 379 at cd92a400
IN from bad port 379 at cd92a410
IN from bad port 379 at cd92a464
IN from bad port 37a at cd92c7c8
IN from bad port 378 at cd92c880
IN from bad port 67a at cd92c978
IN from bad port 67a at cd92c9fc
IN from bad port 279 at cd92a3e8
IN from bad port 279 at cd92a400
IN from bad port 279 at cd92a410
IN from bad port 279 at cd92a464
IN from bad port 279 at cd92a3e8
IN from bad port 279 at cd92a400
IN from bad port 279 at cd92a410
IN from bad port 279 at cd92a464
IN from bad port 27a at cd92c7c8
IN from bad port 278 at cd92c880
lp: driver loaded but no devices found
VFS: Disk change detected on device ide0(3,64)
ISO 9660 Extensions: RRIP_1991A
# /etc/gpm.conf - configuration file for gpm(1)
#
# If mouse response seems to be to slow, try using
# responsiveness=15. append can contain any random arguments to be
# appended to the commandline.
#
# If you edit this file by hand, please be aware it is sourced by
# /etc/init.d/gpm and thus all shell meta characters must be
# protected from evaluation (i.e. by quoting them).
#
# This file is used by /etc/init.d/gpm and can be modified by
# /usr/sbin/gpmconfig.
#
device=/dev/psaux
responsiveness=18
repeat_type=raw
type=autops2
append=""
sample_rate=
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "macintosh"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
EndSection
Section "Device"
Identifier "ATY Rage 128 VR"
Driver "ati"
BusID "PCI:00:16:0"
VideoRam 8192
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "iMac"
HorizSync 28-33
VertRefresh 43-72
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATY Rage 128 VR"
Monitor "iMac"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
### END DEBCONF SECTION
warning: process set to nice value 0 instead of -10 as requested
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.18-powerpc-smp ppc [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Jan 4 18:44:11 1970
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "iMac"
(**) | |-->Device "ATY Rage 128 VR"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "macintosh"
(**) XKB: layout: "us"
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI: (0:16:0) ATI Rage 128 RL rev 0, Mem @ 0x94000000/26, 0x90000000/14, I/O @ 0x0400/8, BIOS @ 0x90020000/17
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(--) Chipset ATI Rage 128 RL (AGP) found
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 4.0.1
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) R128(0): PCI bus 0 card 16 func 0
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(**) R128(0): Using framebuffer device
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.0.2
(--) R128(0): Chipset: "ATI Rage 128 RL (AGP)" (ChipID = 0x524c)
(--) R128(0): Linear framebuffer at 0x94000000
(--) R128(0): MMIO registers at 0x90000000
(--) R128(0): BIOS at 0x90020000
(II) R128(0): Video RAM override, using 8192 kB instead of 8192 kB
(**) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1)
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(II) R128(0): PLL parameters: rf=2950 rd=56 min=12500 max=25000; xclk=5010
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): iMac: Using hsync range of 28.00-33.00 kHz
(II) R128(0): iMac: Using vrefresh range of 43.00-72.00 Hz
(II) R128(0): Clock range: 12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "1152x864" (no mode of this name)
(II) R128(0): Not using mode "1024x768" (no mode of this name)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(--) R128(0): Virtual size is 640x480 (pitch 640)
(**) R128(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(++) R128(0): DPI set to (100, 100)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
modprobe: Can't locate module r128
[drm] failed to load kernel module "r128"
(II) R128(0): [drm] drmOpen failed
(EE) R128(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) R128(0): Memory manager initialized to (0,0) (640,6553)
(II) R128(0): Reserved area from (0,480) to (640,482)
(II) R128(0): Largest offscreen area available: 640 x 6071
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
7 512x512 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 964)
(II) R128(0): Largest offscreen area available: 640 x 6067
(**) R128(0): DPMS enabled
(II) R128(0): Direct rendering disabled
PEXExtensionInit: Couldn't open default PEX font file Roman_M
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Configured Mouse: Core Pointer
(==) Configured Mouse: Buttons: 3
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
xinit: unexpected signal 2
waiting for X server to shut down
prw-r--r-- 1 root root 0 Jan 4 01:50 /dev/gpmdata
crw-rw---- 1 root root 13, 63 Mar 14 2002 /dev/input/mice
lrwxrwxrwx 1 root root 7 Jan 4 01:56 /dev/mouse -> gpmdata
crw------- 1 root root 10, 1 Mar 14 2002 /dev/psaux
Reply to: