Re: Pismo LCD
"Thomas Peri" <ispleen@mac.com> writes:
> I'm installing debian on a 400-Mhz Pismo, and I'm at the point at
> which it asks for the monitor's best video mode. Since I remember
> hearing a few years ago that laptop LCDs can get damaged if the wrong
> settings are used, I thought I'd ask here before picking one thing or
> another. Which settings are appropriate for the Pismo's screen?
I'm attaching a copy of the XF86Config that I use with my pismo 500.
Cheers,
jas.
--
Section "DRI"
# Mode 0666
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
# ModulePath "/usr/XF86-DRI/lib/modules"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
# Load "glx"
# Load "dri"
# You can load other modules as well of course
EndSection
Section "ServerFlags"
Option "blank time" "5"
Option "standby time" "7"
Option "suspend time" "10"
Option "off time" "15"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "AutoRepeat" "500 5"
Option "XkbDisable"
Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "macintosh"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Keyboard2"
Driver "keyboard"
Option "AutoRepeat" "500 5"
Option "XkbDisable"
Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
EndSection
# ADB mouse
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "BusMouse"
Option "Device" "/dev/mouse"
EndSection
# USB mouse
Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
#TrackBall
# Section "InputDevice"
# Identifier "Mouse3"
# Driver "mouse"
# # Option "Protocol" "ThinkingMousePS/2"
# Option "Protocol" "IMPS/2"
# Option "Device" "/dev/mouse"
# Option "Buttons" "3"
# EndSection
Section "Monitor"
Identifier "PowerBook Display"
HorizSync 30-64 # multisync
VertRefresh 50-100 # multisync
Option "dpms" "on"
Mode "1024x768"
# D: 78.740 MHz, H: 60.015 kHz, V: 75.019 Hz
DotClock 78.741
HTimings 1024 1058 1154 1312
VTimings 768 769 772 800
Flags "+HSync" "+VSync"
EndMode
EndSection
Section "Monitor"
Identifier "Viewsonic21"
VendorName "Viewsonic"
ModelName "Unknown"
HorizSync 30-82
VertRefresh 50-150
# Mode "1024x768"
# DotClock 85.00
# HTimings 1024 1076 1196 1356
# VTimings 768 780 783 823
# Flags "+HSync" "+VSync"
# EndMode
# Mode "1280x1024"
# DotClock 110.00
# HTimings 1280 1368 1552 1720
# VTimings 1024 1025 1028 1078
# Flags "+HSync" "+VSync"
# EndMode
# Modeline "1200x900" 100.00 1200 1259 1418 1554 900 901 911 940
# Modeline "1152x864" 92.00 1152 1208 1368 1506 864 865 875 911
# Modeline "800x600" 60.75 800 852 916 1060 600 604 609 637 -hsync -vsync
# Modeline "640x480" 36.00 640 680 736 860 480 481 484 513 -hsync -vsync
EndSection
Section "Device"
Identifier "Rage128 LCD"
Driver "r128"
BusID "PCI:0:16:0"
Option "UseFBDev"
# Remove this option if there is AGP GART support
Option "ForcePCIMode"
# Enable flat panel (especially for Pismos)
# Option "ProgramFPRegs" "No"
# Option "EnableFP"
# Option "PanelX" "1024"
# Option "PanelY" "768"
Option "XAANoDashedBresenhamLine"
EndSection
Section "Device"
Identifier "Rage128 External"
Driver "r128"
BusID "PCI:0:16:0"
Option "UseFBDev"
# Remove this option if there is AGP GART support
Option "ForcePCIMode"
Option "XAANoDashedBresenhamLine"
EndSection
Section "Screen"
Identifier "LCD Screen"
Device "Rage128 LCD"
Monitor "PowerBook Display"
DefaultDepth 24
# Only depth 16 and 24 (fbbpp 32) are supported for DRI
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Fbbpp 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Viewsonic21"
Device "Rage128 External"
Monitor "Viewsonic21"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1024x768" "1280x1024" "800x600" "640x480"
EndSubSection
# Only depth 16 and 24 (fbbpp 32) are supported for DRI
# SubSection "Display"
# Depth 16
# Modes "1280x1024" "1024x768" "800x600" "640x480"
# EndSubSection
SubSection "Display"
Depth 24
Fbbpp 32
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Laptop Only"
Screen "LCD Screen"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "External"
Screen "Viewsonic21"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Mouse2" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Reply to:
- References:
- Pismo LCD
- From: Thomas Peri <ispleen@mac.com>