Re: I cannot install Potato on a 7600
Ethan Benson wrote:
> scsi disk i presume, my guess is the debian kernel is missing the
> necessary scsi driver, all it should take is making a new boot disk
> with a kernel compiled in with the right driver...
My problem is that my friends are running only on i386 architecture.
>
> can you get a dmesg output from both the linuxppc kernel and the
> debian kernel? that would help in confirming this.
Ok, i send the dmesgs attached.
Regards,
--
Kovács I. Zoltán
rendszergazda
Hungária Nyomda Rt. H-5600 Békéscsaba, Kétegyházi út 18.
----------------------------------------------------------------------
mailto:kovacszoltan@hungarianyomda.hu
device tree used 19108 bytes
Total memory = 128MB; using 512kB for hash table (at c0280000)
Linux version 2.2.17 (root@drow.them.org) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 Tue Jul 18 17:51:27 PDT 2000
PCI bus 0 controlled by bandit at f2000000
Cache coherency enabled for bandit/PSX at f2000000
PCI bus 1 controlled by chaos at f0000000
pmac nvram is core99: 0
System has 32 possible interrupts
GMT Delta read from XPRAM: 60 minutes, DST: off
via_calibrate_decr: decrementer_count = 115008 (690051 ticks)
Console: colour dummy device 80x25
Calibrating delay loop... 596.38 BogoMIPS
Memory: 126692k available (1472k kernel code, 2728k data, 180k init) [c0000000,c8000000]
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
adb devices: [2]: 2 5 [3]: 3 1 [14]: 14 c0
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Starting kswapd v 1.5
OHCI USB Driver loading
usbcore: Registered new driver mouse
USB HID boot protocol mouse driver registered.
usbcore: Registered new driver keyboard
usbcore: Registered new driver hub
MacOS display is /chaos/control
Monitor sense value = 0x62b, using video mode 17 and color mode 1.
Console: switching to colour frame buffer device 128x48
fb0: control display adapter
ADB keyboard at 2, handler set to 3
ADB mouse at 3, handler set to 4
PowerMac Z8530 serial driver version 2.0
tty00 at 0xf3013020 (irq = 15) is a Z8530 ESCC, port = modem
tty01 at 0xf3013000 (irq = 16) is a Z8530 ESCC, port = printer
pty: 256 Unix98 ptys configured
Macintosh ADB mouse driver installed.
Macintosh non-volatile memory driver v1.0
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
fd0: SWIM3 floppy controller
scsi0 : MESH
scsi1 : 53C94
scsi : 2 hosts.
mesh: target 0 synchronous at 10.0 MB/s
Vendor: MATSHITA Model: CD-ROM CR-8008 Rev: 8.0e
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
scsi : detected 1 SCSI generic 1 SCSI cdrom total.
Uniform CD-ROM driver Revision: 3.11
eth0: MACE at 00:05:02:5c:06:1a, chip revision 25.64
eth1: DC21143 at 0x0400 (PCI bus 0, device 14), h/w address 00:40:f6:f4:b3:d7,
and requires IRQ24 (provided by PCI BIOS).
de4x5.c:V0.544 1999/5/8 davies@maniac.ultranet.com
VFS: Insert root floppy disk to be loaded into RAM disk and press ENTER
VFS: Disk change detected on device fd(2,0)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 180k init 32k prep
VFS: Disk change detected on device fd(2,0)
VFS: Can't find an ext2 filesystem on dev fd(2,0).
VFS: Can't find a romfs filesystem on dev 02:00.
Unable to identify CD-ROM format.
device tree used 31492 bytes
Total memory = 128MB; using 512kB for hash table (at c0280000)
Linux version 2.2.15pre3 (benh@sawtooth.wanadoo.fr) (gcc version 2.95.2 19991024 (release/franzo)) #3 Sat Jan 29 18:02:45 CET 2000
PCI bus 0 controlled by bandit at f2000000
Cache coherency enabled for bandit/PSX at f2000000
PCI bus 1 controlled by chaos at f0000000
System has 32 possible interrupts
via_calibrate_decr: decrementer_count = 115008 (690051 ticks)
Console: colour dummy device 80x25
Calibrating delay loop... 596.38 BogoMIPS
Memory: 126652k available (1460k kernel code, 2808k data, 152k init) [c0000000,c8000000]
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
adb devices: [2]: 2 5 [3]: 3 1 [14]: 14 c0
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
NET4: AppleTalk 0.18 for Linux NET4.0
Starting kswapd v 1.5
OHCI USB Driver loading
usbcore: Registered new driver mouse
USB HID boot protocol mouse driver registered.
usbcore: Registered new driver keyboard
usbcore: Registered new driver hub
MacOS display is /chaos/control
Monitor sense value = 0x62b, using video mode 17 and color mode 1.
Console: switching to colour frame buffer device 128x48
fb0: control display adapter
ADB keyboard at 2, handler set to 3
ADB mouse at 3, handler set to 4
PowerMac Z8530 serial driver version 2.0
tty00 at 0xf3013020 (irq = 15) is a Z8530 ESCC, port = modem
tty01 at 0xf3013000 (irq = 16) is a Z8530 ESCC, port = printer
pty: 256 Unix98 ptys configured
Macintosh ADB mouse driver installed.
Macintosh non-volatile memory driver v1.0
RAM disk driver initialized: 16 RAM disks of 8192K size
loop: registered device at major 7
fd0: SWIM3 floppy controller
scsi0 : MESH
scsi1 : 53C94
scsi : 2 hosts.
mesh: target 0 synchronous at 5.0 MB/s
Vendor: QUANTUM Model: ATLAS_V__9_WLS Rev: 0200
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
mesh: target 3 synchronous at 5.0 MB/s
Vendor: MATSHITA Model: CD-ROM CR-8008 Rev: 8.0e
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
Uniform CDROM driver Revision: 2.56
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17930694 [8755 MB] [8.8 GB]
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
eth0: MACE at 00:05:02:5c:06:1a, chip revision 25.64
The PCI BIOS has not enabled the device at 0/112! Updating PCI command 0014->0015.
tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov
eth1: Digital DS21143 Tulip rev 65 at 0x400, 00:40:F6:F4:B3:D7, IRQ 24.
eth1: EEPROM default media type Autosense.
eth1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
eth1: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY (2) block.
eth1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
eth1: Index #3 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY (4) block.
Partition check:
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 (root on 9)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 152k init 32k prep
Adding Swap: 55808k swap-space (priority -1)
DMA sound driver installed, using 4 buffers of 32k.
Reply to: