Re: ppp- and dns-problem
Am Sonntag, 29. April 2001 06:15 schrieb marty:
> > Here are the results
> >
> > netstat -rn
> > Kernel IP routing table
> > Destination Gateway Genmask Flags MSS Window irtt
> > Iface 62.104.208.43 0.0.0.0 255.255.255.255 UH 0 0
> > 0 ppp0 192.168.1.0 192.168.1.200 255.255.255.0 UG 0 0
> > 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0
> > 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG
> > 0 0 0 eth0
>
> that last line is a default route to a gateway on the ethernet...
>
> adding a defaultroute to the dialup will break the routing, because you
> can't have two **default** routes...
>
> do you have a gateway on the ethernet?
I understand now. My problem is that with the combi card I had the ethenet
configured even if there was no cabling in ethenet port and therefore no
gateway. Now with the scheme everything is working fine.
Thanks for your help.
Vincent Laisney
>
> if not, bring eth0 back up then do a:
>
> route del default eth0
>
> then dial up the ppp link and either manually add a default route to the
> other end of the link or specify defaultroute in /etc/ppp/options and let
> it do it for you...
>
> > Kernel IP routing table
> > Destination Gateway Genmask Flags MSS Window irtt
> > Iface 62.104.208.43 0.0.0.0 255.255.255.255 UH 0 0
> > 0 ppp0 0.0.0.0 62.104.208.43 0.0.0.0 UG 0 0
> > 0 ppp0
>
> your final route table should look something like this:
>
> Kernel IP routing table
> Destination Gateway Genmask Flags MSS Window irtt
> Iface 62.104.208.43 0.0.0.0 255.255.255.255 UH 0 0
> 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0
> 0 eth0 0.0.0.0 62.104.208.43 0.0.0.0 UG 0 0
> 0 ppp0
>
> later
> marty
>
> "I can't buy what I want because it's free. Can't be what they want
> because I'm me." - Corduroy, Pearl Jam
Reply to: