Package: src:linux Version: 3.6.4-1~experimental.1 Severity: important This machine works fine booting the wheezy kernel (3.2.0-4-powerpc 3.2.32-1) via grub 2.00-7. However, when I tried booting this machine to the 3.6 kernel in experimental, via grub 2.00-7, the machine hung on boot and displayed the Oops and backtrace shown in the attached image (apologies for the low resolution of my webcam). The error message appearsf to be: "Unable to handle kernel paging request for data at address 0x0000000c" And the backtrace looks like it might be within the snd-powermac kernel module. let me know if i can get you more info. --dkg -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information revision : 3.3 (pvr 8001 0303) platform : PowerMac model : PowerMac4,4 machine : PowerMac4,4 motherboard : PowerMac4,4 MacRISC3 Power Macintosh ** PCI devices: 0000:00:0b.0 Host bridge [0600]: Apple Inc. UniNorth 1.5 AGP [106b:002d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Capabilities: <access denied> Kernel driver in use: agpgart-uninorth 0000:00:10.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV200 QW [Radeon 7500] [1002:5157] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI RV200 QW [Radeon 7500] [1002:5157] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 255 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 0400 [size=256] Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at 90020000 [size=128K] Capabilities: <access denied> Kernel driver in use: radeonfb 0001:10:0b.0 Host bridge [0600]: Apple Inc. UniNorth 1.5 PCI [106b:002e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes 0001:10:17.0 Unassigned class [ff00]: Apple Inc. KeyLargo Mac I/O [106b:0022] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K] Kernel driver in use: macio 0001:10:18.0 USB controller [0c03]: Apple Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 27 Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 0001:10:19.0 USB controller [0c03]: Apple Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 28 Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 0002:20:0b.0 Host bridge [0600]: Apple Inc. UniNorth 1.5 Internal PCI [106b:002f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes 0002:20:0e.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811] (prog-if 10 [OHCI]) Subsystem: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (3000ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 0002:20:0f.0 Ethernet controller [0200]: Apple Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at f5100000 [disabled] [size=1M] Kernel driver in use: gem ** USB devices: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05ac:1001 Apple, Inc. Keyboard Hub [ALPS] Bus 001 Device 003: ID 05ac:0201 Apple, Inc. USB Keyboard [Alps or Logitech, M2452] Bus 001 Device 004: ID 0458:0024 KYE Systems Corp. (Mouse Systems) -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: powerpc (ppc) Kernel: Linux 3.2.0-4-powerpc Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.6-trunk-powerpc depends on: ii debconf [debconf-2.0] 1.5.46 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.6-trunk-powerpc recommends: ii firmware-linux-free 3.1 Versions of packages linux-image-3.6-trunk-powerpc suggests: pn debian-kernel-handbook <none> pn linux-doc-3.6 <none> pn mkvmlinuz <none> Versions of packages linux-image-3.6-trunk-powerpc is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: * linux-image-3.6-trunk-powerpc/postinst/missing-firmware-3.6-trunk-powerpc: linux-image-3.6-trunk-powerpc/prerm/removing-running-kernel-3.6-trunk-powerpc: true linux-image-3.6-trunk-powerpc/postinst/ignoring-ramdisk: linux-image-3.6-trunk-powerpc/postinst/depmod-error-initrd-3.6-trunk-powerpc: false
Attachment:
3.6-powerpc-crash.jpg
Description: JPEG image