Bug#617635: linux-image-2.6.32-5-amd64: Network connection
Can you provide a more complete kernel boot log (either from 'dmesg', or
if that does not include the first messages, from /var/log/messages)?
If you boot with the additional kernel parameter 'idle=mwait', does that
fix the problem?
Adding 'idle=mwait' solved the problem (tested with 2.6.38-2-amd64).
After booting with this kernel option, I ran 6 SFTP transfers in a row
and each one finished in ~7 seconds:
sftp> put *.iso
Uploading debian-6.0.0-amd64-i386-netinst.iso to
/home/dparker/debian-6.0.0-amd64-i386-netinst.iso
debian-6.0.0-amd64-i386-netinst.iso
100% 412MB
51.5MB/s 00:08
sftp> put *.iso
Uploading debian-6.0.0-amd64-i386-netinst.iso to
/home/dparker/debian-6.0.0-amd64-i386-netinst.iso
debian-6.0.0-amd64-i386-netinst.iso
100% 412MB
58.9MB/s 00:07
sftp> put *.iso
Uploading debian-6.0.0-amd64-i386-netinst.iso to
/home/dparker/debian-6.0.0-amd64-i386-netinst.iso
debian-6.0.0-amd64-i386-netinst.iso
100% 412MB
58.9MB/s 00:07
sftp> put *.iso
Uploading debian-6.0.0-amd64-i386-netinst.iso to
/home/dparker/debian-6.0.0-amd64-i386-netinst.iso
debian-6.0.0-amd64-i386-netinst.iso
100% 412MB
58.9MB/s 00:07
sftp> put *.iso
Uploading debian-6.0.0-amd64-i386-netinst.iso to
/home/dparker/debian-6.0.0-amd64-i386-netinst.iso
debian-6.0.0-amd64-i386-netinst.iso
100% 412MB
58.9MB/s 00:07
Booted without the 'idle=mwait' option (same kernel) and the transfer
locked up for several minutes, eventually finishing after ~5 minutes:
sftp> put *.iso
Uploading debian-6.0.0-amd64-i386-netinst.iso to
/home/dparker/debian-6.0.0-amd64-i386-netinst.iso
debian-6.0.0-amd64-i386-netinst.iso
100% 412MB
1.3MB/s 05:07
The entire /var/log/messages is as follows (you can see where the
problem occurred at time index 334.522217):
May 17 11:11:07 testbed1 kernel: imklog 4.6.4, log source = /proc/kmsg
started.
May 17 11:11:07 testbed1 rsyslogd: [origin software="rsyslogd"
swVersion="4.6.4" x-pid="960" x-info="http://www.rsyslog.com";] (re)start
May 17 11:11:07 testbed1 kernel: [ 0.000000] Initializing cgroup
subsys cpuset
May 17 11:11:07 testbed1 kernel: [ 0.000000] Initializing cgroup
subsys cpu
May 17 11:11:07 testbed1 kernel: [ 0.000000] Linux version
2.6.38-2-amd64 (Debian 2.6.38-4) (ben@decadent.org.uk) (gcc version
4.4.6 (Debian 4.4.6-2) ) #1 SMP Sat Apr 23 18:47:49 UTC 2011
May 17 11:11:07 testbed1 kernel: [ 0.000000] Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64
root=UUID=b9e81b50-f576-463d-92cc-7cb62419fa6c ro quiet
May 17 11:11:07 testbed1 kernel: [ 0.000000] BIOS-provided physical
RAM map:
May 17 11:11:07 testbed1 kernel: [ 0.000000] BIOS-e820:
0000000000000000 - 000000000009f800 (usable)
May 17 11:11:07 testbed1 kernel: [ 0.000000] BIOS-e820:
000000000009f800 - 00000000000a0000 (reserved)
May 17 11:11:07 testbed1 kernel: [ 0.000000] BIOS-e820:
00000000000e8000 - 0000000000100000 (reserved)
May 17 11:11:07 testbed1 kernel: [ 0.000000] BIOS-e820:
0000000000100000 - 00000000dfbc6b00 (usable)
May 17 11:11:07 testbed1 kernel: [ 0.000000] BIOS-e820:
00000000dfbc6b00 - 00000000e0000000 (reserved)
May 17 11:11:07 testbed1 kernel: [ 0.000000] BIOS-e820:
00000000f4000000 - 00000000f8000000 (reserved)
May 17 11:11:07 testbed1 kernel: [ 0.000000] BIOS-e820:
00000000fec00000 - 00000000fed40000 (reserved)
May 17 11:11:07 testbed1 kernel: [ 0.000000] BIOS-e820:
00000000fed45000 - 0000000100000000 (reserved)
May 17 11:11:07 testbed1 kernel: [ 0.000000] BIOS-e820:
0000000100000000 - 0000000220000000 (usable)
May 17 11:11:07 testbed1 kernel: [ 0.000000] NX (Execute Disable)
protection: active
May 17 11:11:07 testbed1 kernel: [ 0.000000] DMI 2.6 present.
May 17 11:11:07 testbed1 kernel: [ 0.000000] No AGP bridge found
May 17 11:11:07 testbed1 kernel: [ 0.000000] last_pfn = 0x220000
max_arch_pfn = 0x400000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] x86 PAT enabled: cpu 0,
old 0x7040600070406, new 0x7010600070106
May 17 11:11:07 testbed1 kernel: [ 0.000000] last_pfn = 0xdfbc6
max_arch_pfn = 0x400000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] Using GB pages for
direct mapping
May 17 11:11:07 testbed1 kernel: [ 0.000000] init_memory_mapping:
0000000000000000-00000000dfbc6000
May 17 11:11:07 testbed1 kernel: [ 0.000000] init_memory_mapping:
0000000100000000-0000000220000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] RAMDISK: 3768f000 - 37ff0000
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: RSDP
00000000000e5e10 00014 (v00 COMPAQ)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: RSDT
00000000dfbd6b40 00040 (v01 HPQOEM SLIC-BPC 20100713 00000000)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: FACP
00000000dfbd6be8 00074 (v01 COMPAQ HP_RS880 00000001 00000000)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: DSDT
00000000dfbd6f5f 09763 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: FACS
00000000dfbd6b00 00040
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: APIC
00000000dfbd6c5c 00084 (v01 COMPAQ HP_RS880 00000001 00000000)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: ASF!
00000000dfbd6ce0 00063 (v32 COMPAQ HP_RS880 00000001 00000000)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: MCFG
00000000dfbd6d43 0003C (v01 COMPAQ HP_RS880 00000001 00000000)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: TCPA
00000000dfbd6d7f 00032 (v01 COMPAQ HP_RS880 00000001 00000000)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: SLIC
00000000dfbd6db1 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: HPET
00000000dfbd6f27 00038 (v01 COMPAQ HP_RS880 00000001 00000000)
May 17 11:11:07 testbed1 kernel: [ 0.000000] Scanning NUMA topology
in Northbridge 24
May 17 11:11:07 testbed1 kernel: [ 0.000000] No NUMA configuration found
May 17 11:11:07 testbed1 kernel: [ 0.000000] Faking a node at
0000000000000000-0000000220000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] Initmem setup node 0
0000000000000000-0000000220000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] NODE_DATA
[000000021fffb000 - 000000021fffffff]
May 17 11:11:07 testbed1 kernel: [ 0.000000] Zone PFN ranges:
May 17 11:11:07 testbed1 kernel: [ 0.000000] DMA 0x00000010 ->
0x00001000
May 17 11:11:07 testbed1 kernel: [ 0.000000] DMA32 0x00001000 ->
0x00100000
May 17 11:11:07 testbed1 kernel: [ 0.000000] Normal 0x00100000 ->
0x00220000
May 17 11:11:07 testbed1 kernel: [ 0.000000] Movable zone start PFN
for each node
May 17 11:11:07 testbed1 kernel: [ 0.000000] early_node_map[3] active
PFN ranges
May 17 11:11:07 testbed1 kernel: [ 0.000000] 0: 0x00000010 ->
0x0000009f
May 17 11:11:07 testbed1 kernel: [ 0.000000] 0: 0x00000100 ->
0x000dfbc6
May 17 11:11:07 testbed1 kernel: [ 0.000000] 0: 0x00100000 ->
0x00220000
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: PM-Timer IO Port:
0xf808
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x01] lapic_id[0x00] enabled)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x02] lapic_id[0x01] enabled)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x03] lapic_id[0x02] enabled)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x04] lapic_id[0x03] enabled)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x01] high edge lint[0x1])
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x02] high edge lint[0x1])
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x03] high edge lint[0x1])
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x04] high edge lint[0x1])
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: IOAPIC (id[0x04]
address[0xfec00000] gsi_base[0])
May 17 11:11:07 testbed1 kernel: [ 0.000000] IOAPIC[0]: apic_id 4,
version 33, address 0xfec00000, GSI 0-23
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 0 global_irq 2 dfl dfl)
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 9 global_irq 9 low level)
May 17 11:11:07 testbed1 kernel: [ 0.000000] Using ACPI (MADT) for
SMP configuration information
May 17 11:11:07 testbed1 kernel: [ 0.000000] ACPI: HPET id:
0x10028300 base: 0xfed00000
May 17 11:11:07 testbed1 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 0
hotplug CPUs
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 000000000009f000 - 00000000000a0000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000a0000 - 00000000000e8000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000e8000 - 0000000000100000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000dfbc6000 - 00000000dfbc7000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000dfbc7000 - 00000000e0000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000e0000000 - 00000000f4000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000f4000000 - 00000000f8000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000f8000000 - 00000000fec00000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000fec00000 - 00000000fed40000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000fed40000 - 00000000fed45000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000fed45000 - 0000000100000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] Allocating PCI resources
starting at e0000000 (gap: e0000000:14000000)
May 17 11:11:07 testbed1 kernel: [ 0.000000] Booting paravirtualized
kernel on bare hardware
May 17 11:11:07 testbed1 kernel: [ 0.000000] setup_percpu:
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
May 17 11:11:07 testbed1 kernel: [ 0.000000] PERCPU: Embedded 28
pages/cpu @ffff8800df800000 s82752 r8192 d23744 u524288
May 17 11:11:07 testbed1 kernel: [ 0.000000] Built 1 zonelists in
Zone order, mobility grouping on. Total pages: 2065487
May 17 11:11:07 testbed1 kernel: [ 0.000000] Policy zone: Normal
May 17 11:11:07 testbed1 kernel: [ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64
root=UUID=b9e81b50-f576-463d-92cc-7cb62419fa6c ro quiet
May 17 11:11:07 testbed1 kernel: [ 0.000000] PID hash table entries:
4096 (order: 3, 32768 bytes)
May 17 11:11:07 testbed1 kernel: [ 0.000000] Checking aperture...
May 17 11:11:07 testbed1 kernel: [ 0.000000] No AGP bridge found
May 17 11:11:07 testbed1 kernel: [ 0.000000] Node 0: aperture @
d4000000 size 32 MB
May 17 11:11:07 testbed1 kernel: [ 0.000000] Aperture pointing to
e820 RAM. Ignoring.
May 17 11:11:07 testbed1 kernel: [ 0.000000] Your BIOS doesn't leave
a aperture memory hole
May 17 11:11:07 testbed1 kernel: [ 0.000000] Please enable the IOMMU
option in the BIOS setup
May 17 11:11:07 testbed1 kernel: [ 0.000000] This costs you 64 MB of RAM
May 17 11:11:07 testbed1 kernel: [ 0.000000] Mapping aperture over
65536 KB of RAM @ d4000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000d4000000 - 00000000d8000000
May 17 11:11:07 testbed1 kernel: [ 0.000000] Memory:
8116888k/8912896k available (3260k kernel code, 529068k absent, 266940k
reserved, 3425k data, 676k init)
May 17 11:11:07 testbed1 kernel: [ 0.000000] SLUB: Genslabs=15,
HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
May 17 11:11:07 testbed1 kernel: [ 0.000000] Hierarchical RCU
implementation.
May 17 11:11:07 testbed1 kernel: [ 0.000000] RCU dyntick-idle
grace-period acceleration is enabled.
May 17 11:11:07 testbed1 kernel: [ 0.000000] RCU-based
detection of stalled CPUs is disabled.
May 17 11:11:07 testbed1 kernel: [ 0.000000] NR_IRQS:33024 nr_irqs:712 16
May 17 11:11:07 testbed1 kernel: [ 0.000000] Console: colour VGA+ 80x25
May 17 11:11:07 testbed1 kernel: [ 0.000000] console [tty0] enabled
May 17 11:11:07 testbed1 kernel: [ 0.000000] Fast TSC calibration
using PIT
May 17 11:11:07 testbed1 kernel: [ 0.000000] Detected 2992.580 MHz
processor.
May 17 11:11:07 testbed1 kernel: [ 0.008003] Calibrating delay loop
(skipped), value calculated using timer frequency.. 5985.16 BogoMIPS
(lpj=11970320)
May 17 11:11:07 testbed1 kernel: [ 0.008007] pid_max: default: 32768
minimum: 301
May 17 11:11:07 testbed1 kernel: [ 0.008024] Security Framework
initialized
May 17 11:11:07 testbed1 kernel: [ 0.008027] SELinux: Disabled at boot.
May 17 11:11:07 testbed1 kernel: [ 0.008521] Dentry cache hash table
entries: 1048576 (order: 11, 8388608 bytes)
May 17 11:11:07 testbed1 kernel: [ 0.013636] Inode-cache hash table
entries: 524288 (order: 10, 4194304 bytes)
May 17 11:11:07 testbed1 kernel: [ 0.014682] Mount-cache hash table
entries: 256
May 17 11:11:07 testbed1 kernel: [ 0.014779] Initializing cgroup
subsys ns
May 17 11:11:07 testbed1 kernel: [ 0.014782] ns_cgroup deprecated:
consider using the 'clone_children' flag without the ns_cgroup.
May 17 11:11:07 testbed1 kernel: [ 0.014784] Initializing cgroup
subsys cpuacct
May 17 11:11:07 testbed1 kernel: [ 0.014787] Initializing cgroup
subsys devices
May 17 11:11:07 testbed1 kernel: [ 0.014789] Initializing cgroup
subsys freezer
May 17 11:11:07 testbed1 kernel: [ 0.014790] Initializing cgroup
subsys net_cls
May 17 11:11:07 testbed1 kernel: [ 0.014792] Initializing cgroup
subsys blkio
May 17 11:11:07 testbed1 kernel: [ 0.014818] CPU: Physical Processor
ID: 0
May 17 11:11:07 testbed1 kernel: [ 0.014819] CPU: Processor Core ID: 0
May 17 11:11:07 testbed1 kernel: [ 0.014820] mce: CPU supports 6 MCE
banks
May 17 11:11:07 testbed1 kernel: [ 0.014827] using C1E aware idle routine
May 17 11:11:07 testbed1 kernel: [ 0.015424] ACPI: Core revision 20110112
May 17 11:11:07 testbed1 kernel: [ 0.019031] Setting APIC routing to flat
May 17 11:11:07 testbed1 kernel: [ 0.019390] ..TIMER: vector=0x30
apic1=0 pin1=2 apic2=-1 pin2=-1
May 17 11:11:07 testbed1 kernel: [ 0.059083] CPU0: AMD Phenom(tm) II
X4 B95 Processor stepping 02
May 17 11:11:07 testbed1 kernel: [ 0.060003] Performance Events: AMD
PMU driver.
May 17 11:11:07 testbed1 kernel: [ 0.060003] ... version:
0
May 17 11:11:07 testbed1 kernel: [ 0.060003] ... bit width:
48
May 17 11:11:07 testbed1 kernel: [ 0.060003] ... generic registers:
4
May 17 11:11:07 testbed1 kernel: [ 0.060003] ... value mask:
0000ffffffffffff
May 17 11:11:07 testbed1 kernel: [ 0.060003] ... max period:
00007fffffffffff
May 17 11:11:07 testbed1 kernel: [ 0.060003] ... fixed-purpose
events: 0
May 17 11:11:07 testbed1 kernel: [ 0.060003] ... event mask:
000000000000000f
May 17 11:11:07 testbed1 kernel: [ 0.060003] NMI watchdog enabled,
takes one hw-pmu counter.
May 17 11:11:07 testbed1 kernel: [ 0.060003] Booting Node 0,
Processors #1
May 17 11:11:07 testbed1 kernel: [ 0.148019] NMI watchdog enabled,
takes one hw-pmu counter.
May 17 11:11:07 testbed1 kernel: [ 0.148032] System has AMD C1E enabled
May 17 11:11:07 testbed1 kernel: [ 0.148069] #2
May 17 11:11:07 testbed1 kernel: [ 0.148079] Switch to broadcast mode
on CPU1
May 17 11:11:07 testbed1 kernel: [ 0.240029] NMI watchdog enabled,
takes one hw-pmu counter.
May 17 11:11:07 testbed1 kernel: [ 0.240043] Switch to broadcast mode
on CPU2
May 17 11:11:07 testbed1 kernel: [ 0.240081] #3 Ok.
May 17 11:11:07 testbed1 kernel: [ 0.332039] NMI watchdog enabled,
takes one hw-pmu counter.
May 17 11:11:07 testbed1 kernel: [ 0.332057] Brought up 4 CPUs
May 17 11:11:07 testbed1 kernel: [ 0.332056] Switch to broadcast mode
on CPU3
May 17 11:11:07 testbed1 kernel: [ 0.332064] Total of 4 processors
activated (23940.19 BogoMIPS).
May 17 11:11:07 testbed1 kernel: [ 0.334428] Switch to broadcast mode
on CPU0
May 17 11:11:07 testbed1 kernel: [ 0.334428] devtmpfs: initialized
May 17 11:11:07 testbed1 kernel: [ 0.339147] print_constraints: dummy:
May 17 11:11:07 testbed1 kernel: [ 0.339147] NET: Registered protocol
family 16
May 17 11:11:07 testbed1 kernel: [ 0.339147] TOM: 00000000e0000000
aka 3584M
May 17 11:11:07 testbed1 kernel: [ 0.339147] TOM2: 0000000220000000
aka 8704M
May 17 11:11:07 testbed1 kernel: [ 0.339147] Extended Config Space
enabled on 1 nodes
May 17 11:11:07 testbed1 kernel: [ 0.339147] ACPI: bus type pci
registered
May 17 11:11:07 testbed1 kernel: [ 0.339147] PCI: MMCONFIG for domain
0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
May 17 11:11:07 testbed1 kernel: [ 0.339147] PCI: MMCONFIG at [mem
0xf4000000-0xf7ffffff] reserved in E820
May 17 11:11:07 testbed1 kernel: [ 0.345274] PCI: Using configuration
type 1 for base access
May 17 11:11:07 testbed1 kernel: [ 0.345576] bio: create slab <bio-0>
at 0
May 17 11:11:07 testbed1 kernel: [ 0.345936] ACPI: Interpreter enabled
May 17 11:11:07 testbed1 kernel: [ 0.345939] ACPI: (supports S0 S3 S4 S5)
May 17 11:11:07 testbed1 kernel: [ 0.345951] ACPI: Using IOAPIC for
interrupt routing
May 17 11:11:07 testbed1 kernel: [ 0.368072] ACPI: No dock devices found.
May 17 11:11:07 testbed1 kernel: [ 0.368074] HEST: Table not found.
May 17 11:11:07 testbed1 kernel: [ 0.368076] PCI: Using host bridge
windows from ACPI; if necessary, use "pci=nocrs" and report a bug
May 17 11:11:07 testbed1 kernel: [ 0.448088] ACPI Error: [CAPD]
Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143)
May 17 11:11:07 testbed1 kernel: [ 0.448093] ACPI Error: Method
parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880217448fa0),
AE_ALREADY_EXISTS (20110112/psparse-536)
May 17 11:11:07 testbed1 kernel: [ 0.448099] ACPI: Marking method
_OSC as Serialized because of AE_ALREADY_EXISTS error
May 17 11:11:07 testbed1 kernel: [ 0.448103] ACPI Warning: For
\_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI
requires 4 (20110112/nspredef-352)
May 17 11:11:07 testbed1 kernel: [ 0.448107] ACPI: PCI Root Bridge
[PCI0] (domain 0000 [bus 00-ff])
May 17 11:11:07 testbed1 kernel: [ 0.528055] pci_root PNP0A08:00:
host bridge window [mem 0xf8000000-0xfebfffff]
May 17 11:11:07 testbed1 kernel: [ 0.528057] pci_root PNP0A08:00:
host bridge window [io 0x0000-0x0cf7]
May 17 11:11:07 testbed1 kernel: [ 0.528059] pci_root PNP0A08:00:
host bridge window [io 0x1000-0x2fff]
May 17 11:11:07 testbed1 kernel: [ 0.528061] pci_root PNP0A08:00:
host bridge window [io 0x3000-0x6fff]
May 17 11:11:07 testbed1 kernel: [ 0.528062] pci_root PNP0A08:00:
host bridge window [io 0x7000-0xafff]
May 17 11:11:07 testbed1 kernel: [ 0.528064] pci_root PNP0A08:00:
host bridge window [io 0xb000-0xffff]
May 17 11:11:07 testbed1 kernel: [ 0.528066] pci_root PNP0A08:00:
host bridge window [mem 0x000a0000-0x000bffff]
May 17 11:11:07 testbed1 kernel: [ 0.528068] pci_root PNP0A08:00:
host bridge window [mem 0xe0000000-0xf3ffffff]
May 17 11:11:07 testbed1 kernel: [ 0.528070] pci_root PNP0A08:00:
host bridge window [mem 0xfed40000-0xfed44fff]
May 17 11:11:07 testbed1 kernel: [ 0.536043] pci 0000:00:02.0: PCI
bridge to [bus 02-02]
May 17 11:11:07 testbed1 kernel: [ 0.544043] pci 0000:00:0a.0: PCI
bridge to [bus 3f-3f]
May 17 11:11:07 testbed1 kernel: [ 0.544108] pci 0000:00:14.4: PCI
bridge to [bus 0f-0f] (subtractive decode)
May 17 11:11:07 testbed1 kernel: [ 0.544383] ACPI Error: [CAPD]
Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143)
May 17 11:11:07 testbed1 kernel: [ 0.544387] ACPI Error: Method
parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880217448fa0),
AE_ALREADY_EXISTS (20110112/psparse-536)
May 17 11:11:07 testbed1 kernel: [ 0.544393] ACPI Warning: For
\_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI
requires 4 (20110112/nspredef-352)
May 17 11:11:07 testbed1 kernel: [ 0.544398] pci0000:00: Requesting
ACPI _OSC control (0x1d)
May 17 11:11:07 testbed1 kernel: [ 0.544431] ACPI Error: [CAPD]
Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143)
May 17 11:11:07 testbed1 kernel: [ 0.544434] ACPI Error: Method
parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880217448fa0),
AE_ALREADY_EXISTS (20110112/psparse-536)
May 17 11:11:07 testbed1 kernel: [ 0.544440] ACPI Warning: For
\_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI
requires 4 (20110112/nspredef-352)
May 17 11:11:07 testbed1 kernel: [ 0.562363] ACPI: PCI Interrupt Link
[LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
May 17 11:11:07 testbed1 kernel: [ 0.562392] ACPI: PCI Interrupt Link
[LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
May 17 11:11:07 testbed1 kernel: [ 0.562420] ACPI: PCI Interrupt Link
[LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
May 17 11:11:07 testbed1 kernel: [ 0.562449] ACPI: PCI Interrupt Link
[LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
May 17 11:11:07 testbed1 kernel: [ 0.562477] ACPI: PCI Interrupt Link
[LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
May 17 11:11:07 testbed1 kernel: [ 0.562504] ACPI: PCI Interrupt Link
[LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
May 17 11:11:07 testbed1 kernel: [ 0.562532] ACPI: PCI Interrupt Link
[LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
May 17 11:11:07 testbed1 kernel: [ 0.562559] ACPI: PCI Interrupt Link
[LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
May 17 11:11:07 testbed1 kernel: [ 0.562627] vgaarb: device added:
PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
May 17 11:11:07 testbed1 kernel: [ 0.562629] vgaarb: loaded
May 17 11:11:07 testbed1 kernel: [ 0.562650] PCI: Using ACPI for IRQ
routing
May 17 11:11:07 testbed1 kernel: [ 0.562850] hpet0: at MMIO
0xfed00000, IRQs 2, 8, 0, 0
May 17 11:11:07 testbed1 kernel: [ 0.562854] hpet0: 4 comparators,
32-bit 14.318180 MHz counter
May 17 11:11:07 testbed1 kernel: [ 0.564049] Switching to clocksource
hpet
May 17 11:11:07 testbed1 kernel: [ 0.564865] pnp: PnP ACPI init
May 17 11:11:07 testbed1 kernel: [ 0.564878] ACPI: bus type pnp
registered
May 17 11:11:07 testbed1 kernel: [ 0.567154] Switched to NOHz mode on
CPU #3
May 17 11:11:07 testbed1 kernel: [ 0.567157] Switched to NOHz mode on
CPU #0
May 17 11:11:07 testbed1 kernel: [ 0.567162] Switched to NOHz mode on
CPU #2
May 17 11:11:07 testbed1 kernel: [ 0.567166] Switched to NOHz mode on
CPU #1
May 17 11:11:07 testbed1 kernel: [ 0.576322] system 00:0b: [io
0x040b] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576324] system 00:0b: [io
0x04d0-0x04df] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576388] system 00:0c: [io
0x0800-0x087f] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576390] system 00:0c: [io
0x0880-0x088f] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576392] system 00:0c: [io
0x0c00-0x0c1f] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576394] system 00:0c: [io
0x0c50-0x0c6f] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576396] system 00:0c: [io
0x0cd0-0x0cdf] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576398] system 00:0c: [io
0xf800-0xf87f] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576400] system 00:0c: [io
0xf880-0xf8ff] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576401] system 00:0c: [io
0xf900-0xf97f] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576403] system 00:0c: [io
0xf980-0xf9ff] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576405] system 00:0c: [io
0xfa00-0xfa7f] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576407] system 00:0c: [io
0xfa80-0xfaff] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576409] system 00:0c: [io
0xfc00-0xfc7f] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576411] system 00:0c: [io
0xfd00-0xfd7f] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.576413] system 00:0c: [io
0xfd80-0xfdff] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.584160] system 00:0d: [mem
0x00000000-0x0009ffff] could not be reserved
May 17 11:11:07 testbed1 kernel: [ 0.584162] system 00:0d: [mem
0x00100000-0xdfffffff] could not be reserved
May 17 11:11:07 testbed1 kernel: [ 0.584164] system 00:0d: [mem
0x000e4000-0x000fffff] could not be reserved
May 17 11:11:07 testbed1 kernel: [ 0.584167] system 00:0d: [mem
0xfec01000-0xfecfffff] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.584169] system 00:0d: [mem
0xfed00400-0xfed3ffff] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.584171] system 00:0d: [mem
0xfed45000-0xffffffff] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.584173] system 00:0d: [mem
0xf4000000-0xf7ffffff] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.584175] system 00:0d: [mem
0x000d1600-0x000e3fff] has been reserved
May 17 11:11:07 testbed1 kernel: [ 0.584185] pnp: PnP ACPI: found 14
devices
May 17 11:11:07 testbed1 kernel: [ 0.584186] ACPI: ACPI bus type pnp
unregistered
May 17 11:11:07 testbed1 kernel: [ 0.590211] pci 0000:02:00.0: BAR 6:
assigned [mem 0xf3080000-0xf30fffff pref]
May 17 11:11:07 testbed1 kernel: [ 0.590214] pci 0000:00:02.0: PCI
bridge to [bus 02-02]
May 17 11:11:07 testbed1 kernel: [ 0.590216] pci 0000:00:02.0:
bridge window [io 0x1000-0x1fff]
May 17 11:11:07 testbed1 kernel: [ 0.590219] pci 0000:00:02.0:
bridge window [mem 0xf2000000-0xf30fffff]
May 17 11:11:07 testbed1 kernel: [ 0.590222] pci 0000:00:02.0:
bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
May 17 11:11:07 testbed1 kernel: [ 0.590225] pci 0000:00:0a.0: PCI
bridge to [bus 3f-3f]
May 17 11:11:07 testbed1 kernel: [ 0.590226] pci 0000:00:0a.0:
bridge window [io disabled]
May 17 11:11:07 testbed1 kernel: [ 0.590229] pci 0000:00:0a.0:
bridge window [mem 0xf3100000-0xf31fffff]
May 17 11:11:07 testbed1 kernel: [ 0.590231] pci 0000:00:0a.0:
bridge window [mem pref disabled]
May 17 11:11:07 testbed1 kernel: [ 0.590233] pci 0000:00:14.4: PCI
bridge to [bus 0f-0f]
May 17 11:11:07 testbed1 kernel: [ 0.590235] pci 0000:00:14.4:
bridge window [io disabled]
May 17 11:11:07 testbed1 kernel: [ 0.590239] pci 0000:00:14.4:
bridge window [mem disabled]
May 17 11:11:07 testbed1 kernel: [ 0.590243] pci 0000:00:14.4:
bridge window [mem pref disabled]
May 17 11:11:07 testbed1 kernel: [ 0.590258] pci 0000:00:02.0: PCI
INT A -> GSI 18 (level, low) -> IRQ 18
May 17 11:11:07 testbed1 kernel: [ 0.590264] pci 0000:00:0a.0: PCI
INT A -> GSI 18 (level, low) -> IRQ 18
May 17 11:11:07 testbed1 kernel: [ 0.590331] NET: Registered protocol
family 2
May 17 11:11:07 testbed1 kernel: [ 0.590499] IP route cache hash
table entries: 262144 (order: 9, 2097152 bytes)
May 17 11:11:07 testbed1 kernel: [ 0.591460] TCP established hash
table entries: 524288 (order: 11, 8388608 bytes)
May 17 11:11:07 testbed1 kernel: [ 0.593645] TCP bind hash table
entries: 65536 (order: 8, 1048576 bytes)
May 17 11:11:07 testbed1 kernel: [ 0.593914] TCP: Hash tables
configured (established 524288 bind 65536)
May 17 11:11:07 testbed1 kernel: [ 0.593916] TCP reno registered
May 17 11:11:07 testbed1 kernel: [ 0.593927] UDP hash table entries:
4096 (order: 5, 131072 bytes)
May 17 11:11:07 testbed1 kernel: [ 0.593977] UDP-Lite hash table
entries: 4096 (order: 5, 131072 bytes)
May 17 11:11:07 testbed1 kernel: [ 0.594094] NET: Registered protocol
family 1
May 17 11:11:07 testbed1 kernel: [ 0.594336] Unpacking initramfs...
May 17 11:11:07 testbed1 kernel: [ 0.765146] Freeing initrd memory:
9604k freed
May 17 11:11:07 testbed1 kernel: [ 0.768634] PCI-DMA: Disabling AGP.
May 17 11:11:07 testbed1 kernel: [ 0.768761] PCI-DMA: aperture base @
d4000000 size 65536 KB
May 17 11:11:07 testbed1 kernel: [ 0.768763] PCI-DMA: using GART IOMMU.
May 17 11:11:07 testbed1 kernel: [ 0.768765] PCI-DMA: Reserving 64MB
of IOMMU area in the AGP aperture
May 17 11:11:07 testbed1 kernel: [ 0.772337] audit: initializing
netlink socket (disabled)
May 17 11:11:07 testbed1 kernel: [ 0.772351] type=2000
audit(1305630658.768:1): initialized
May 17 11:11:07 testbed1 kernel: [ 0.779248] HugeTLB registered 2 MB
page size, pre-allocated 0 pages
May 17 11:11:07 testbed1 kernel: [ 0.781278] VFS: Disk quotas dquot_6.5.2
May 17 11:11:07 testbed1 kernel: [ 0.781317] Dquot-cache hash table
entries: 512 (order 0, 4096 bytes)
May 17 11:11:07 testbed1 kernel: [ 0.781377] msgmni has been set to 16000
May 17 11:11:07 testbed1 kernel: [ 0.781594] alg: No test for stdrng
(krng)
May 17 11:11:07 testbed1 kernel: [ 0.781631] Block layer SCSI generic
(bsg) driver version 0.4 loaded (major 253)
May 17 11:11:07 testbed1 kernel: [ 0.781633] io scheduler noop registered
May 17 11:11:07 testbed1 kernel: [ 0.781634] io scheduler deadline
registered
May 17 11:11:07 testbed1 kernel: [ 0.781658] io scheduler cfq
registered (default)
May 17 11:11:07 testbed1 kernel: [ 0.782093] ERST: Table is not found!
May 17 11:11:07 testbed1 kernel: [ 0.782150] Serial: 8250/16550
driver, 4 ports, IRQ sharing enabled
May 17 11:11:07 testbed1 kernel: [ 0.802665] serial8250: ttyS0 at I/O
0x3f8 (irq = 4) is a 16550A
May 17 11:11:07 testbed1 kernel: [ 0.932668] 00:07: ttyS0 at I/O
0x3f8 (irq = 4) is a 16550A
May 17 11:11:07 testbed1 kernel: [ 0.932935] Linux agpgart interface
v0.103
May 17 11:11:07 testbed1 kernel: [ 0.933005] i8042: PNP: PS/2
Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
May 17 11:11:07 testbed1 kernel: [ 0.935910] serio: i8042 KBD port at
0x60,0x64 irq 1
May 17 11:11:07 testbed1 kernel: [ 0.935920] serio: i8042 AUX port at
0x60,0x64 irq 12
May 17 11:11:07 testbed1 kernel: [ 0.936066] mousedev: PS/2 mouse
device common for all mice
May 17 11:11:07 testbed1 kernel: [ 0.936137] rtc_cmos 00:03: RTC can
wake from S4
May 17 11:11:07 testbed1 kernel: [ 0.936204] rtc_cmos 00:03: rtc
core: registered rtc_cmos as rtc0
May 17 11:11:07 testbed1 kernel: [ 0.936270] rtc0: alarms up to one
month, y3k, 114 bytes nvram, hpet irqs
May 17 11:11:07 testbed1 kernel: [ 0.936280] cpuidle: using governor
ladder
May 17 11:11:07 testbed1 kernel: [ 0.936281] cpuidle: using governor menu
May 17 11:11:07 testbed1 kernel: [ 0.936472] TCP cubic registered
May 17 11:11:07 testbed1 kernel: [ 0.936552] NET: Registered protocol
family 10
May 17 11:11:07 testbed1 kernel: [ 0.937005] Mobile IPv6
May 17 11:11:07 testbed1 kernel: [ 0.937007] NET: Registered protocol
family 17
May 17 11:11:07 testbed1 kernel: [ 0.937010] Registering the
dns_resolver key type
May 17 11:11:07 testbed1 kernel: [ 0.937089] registered taskstats
version 1
May 17 11:11:07 testbed1 kernel: [ 0.937693] rtc_cmos 00:03: setting
system clock to 2011-05-17 11:10:59 UTC (1305630659)
May 17 11:11:07 testbed1 kernel: [ 0.937710] Initalizing network drop
monitor service
May 17 11:11:07 testbed1 kernel: [ 0.938711] Freeing unused kernel
memory: 676k freed
May 17 11:11:07 testbed1 kernel: [ 0.938843] Write protecting the
kernel read-only data: 6144k
May 17 11:11:07 testbed1 kernel: [ 0.941669] Freeing unused kernel
memory: 816k freed
May 17 11:11:07 testbed1 kernel: [ 0.944478] Freeing unused kernel
memory: 776k freed
May 17 11:11:07 testbed1 kernel: [ 0.958154] udev[85]: starting
version 164
May 17 11:11:07 testbed1 kernel: [ 0.999158] SCSI subsystem initialized
May 17 11:11:07 testbed1 kernel: [ 1.000259] usbcore: registered new
interface driver usbfs
May 17 11:11:07 testbed1 kernel: [ 1.000370] usbcore: registered new
interface driver hub
May 17 11:11:07 testbed1 kernel: [ 1.000395] usbcore: registered new
device driver usb
May 17 11:11:07 testbed1 kernel: [ 1.003954] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
May 17 11:11:07 testbed1 kernel: [ 1.016035] ehci_hcd 0000:00:12.2:
PCI INT B -> GSI 17 (level, low) -> IRQ 17
May 17 11:11:07 testbed1 kernel: [ 1.016059] ehci_hcd 0000:00:12.2:
EHCI Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.016080] ehci_hcd 0000:00:12.2:
new USB bus registered, assigned bus number 1
May 17 11:11:07 testbed1 kernel: [ 1.027150] tg3.c:v3.116 (December
3, 2010)
May 17 11:11:07 testbed1 kernel: [ 1.027160] tg3 0000:3f:00.0: PCI
INT A -> GSI 18 (level, low) -> IRQ 18
May 17 11:11:07 testbed1 kernel: [ 1.032111] ehci_hcd 0000:00:12.2:
applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
May 17 11:11:07 testbed1 kernel: [ 1.032133] ehci_hcd 0000:00:12.2:
debug port 1
May 17 11:11:07 testbed1 kernel: [ 1.032153] ehci_hcd 0000:00:12.2:
irq 17, io mem 0xf3209400
May 17 11:11:07 testbed1 kernel: [ 1.044104] ehci_hcd 0000:00:12.2:
USB 2.0 started, EHCI 1.00
May 17 11:11:07 testbed1 kernel: [ 1.044120] usb usb1: New USB device
found, idVendor=1d6b, idProduct=0002
May 17 11:11:07 testbed1 kernel: [ 1.044122] usb usb1: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
May 17 11:11:07 testbed1 kernel: [ 1.044124] usb usb1: Product: EHCI
Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.044125] usb usb1: Manufacturer:
Linux 2.6.38-2-amd64 ehci_hcd
May 17 11:11:07 testbed1 kernel: [ 1.044127] usb usb1: SerialNumber:
0000:00:12.2
May 17 11:11:07 testbed1 kernel: [ 1.044226] hub 1-0:1.0: USB hub found
May 17 11:11:07 testbed1 kernel: [ 1.044229] hub 1-0:1.0: 6 ports
detected
May 17 11:11:07 testbed1 kernel: [ 1.044347] ehci_hcd 0000:00:13.2:
PCI INT B -> GSI 19 (level, low) -> IRQ 19
May 17 11:11:07 testbed1 kernel: [ 1.044369] ehci_hcd 0000:00:13.2:
EHCI Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.044377] ehci_hcd 0000:00:13.2:
new USB bus registered, assigned bus number 2
May 17 11:11:07 testbed1 kernel: [ 1.068105] ehci_hcd 0000:00:13.2:
applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
May 17 11:11:07 testbed1 kernel: [ 1.068122] ehci_hcd 0000:00:13.2:
debug port 1
May 17 11:11:07 testbed1 kernel: [ 1.068139] ehci_hcd 0000:00:13.2:
irq 19, io mem 0xf3209500
May 17 11:11:07 testbed1 kernel: [ 1.080090] ehci_hcd 0000:00:13.2:
USB 2.0 started, EHCI 1.00
May 17 11:11:07 testbed1 kernel: [ 1.080099] usb usb2: New USB device
found, idVendor=1d6b, idProduct=0002
May 17 11:11:07 testbed1 kernel: [ 1.080101] usb usb2: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
May 17 11:11:07 testbed1 kernel: [ 1.080103] usb usb2: Product: EHCI
Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.080104] usb usb2: Manufacturer:
Linux 2.6.38-2-amd64 ehci_hcd
May 17 11:11:07 testbed1 kernel: [ 1.080105] usb usb2: SerialNumber:
0000:00:13.2
May 17 11:11:07 testbed1 kernel: [ 1.080171] hub 2-0:1.0: USB hub found
May 17 11:11:07 testbed1 kernel: [ 1.080174] hub 2-0:1.0: 6 ports
detected
May 17 11:11:07 testbed1 kernel: [ 1.080326] ahci 0000:00:11.0: PCI
INT A -> GSI 22 (level, low) -> IRQ 22
May 17 11:11:07 testbed1 kernel: [ 1.080440] ahci 0000:00:11.0: AHCI
0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
May 17 11:11:07 testbed1 kernel: [ 1.080442] ahci 0000:00:11.0:
flags: 64bit ncq sntf ilck led clo pio slum part ccc
May 17 11:11:07 testbed1 kernel: [ 1.081178] scsi0 : ahci
May 17 11:11:07 testbed1 kernel: [ 1.081262] scsi1 : ahci
May 17 11:11:07 testbed1 kernel: [ 1.081319] scsi2 : ahci
May 17 11:11:07 testbed1 kernel: [ 1.081376] scsi3 : ahci
May 17 11:11:07 testbed1 kernel: [ 1.081419] ohci_hcd: USB 1.1 'Open'
Host Controller (OHCI) Driver
May 17 11:11:07 testbed1 kernel: [ 1.081495] scsi4 : ahci
May 17 11:11:07 testbed1 kernel: [ 1.081555] scsi5 : ahci
May 17 11:11:07 testbed1 kernel: [ 1.081690] ata1: SATA max UDMA/133
abar m1024@0xf3209000 port 0xf3209100 irq 22
May 17 11:11:07 testbed1 kernel: [ 1.081694] ata2: SATA max UDMA/133
irq 22
May 17 11:11:07 testbed1 kernel: [ 1.081696] ata3: SATA max UDMA/133
abar m1024@0xf3209000 port 0xf3209200 irq 22
May 17 11:11:07 testbed1 kernel: [ 1.081699] ata4: SATA max UDMA/133
abar m1024@0xf3209000 port 0xf3209280 irq 22
May 17 11:11:07 testbed1 kernel: [ 1.081702] ata5: SATA max UDMA/133
abar m1024@0xf3209000 port 0xf3209300 irq 22
May 17 11:11:07 testbed1 kernel: [ 1.081705] ata6: SATA max UDMA/133
abar m1024@0xf3209000 port 0xf3209380 irq 22
May 17 11:11:07 testbed1 kernel: [ 1.081814] ohci_hcd 0000:00:12.0:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 17 11:11:07 testbed1 kernel: [ 1.081828] ohci_hcd 0000:00:12.0:
OHCI Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.081836] ohci_hcd 0000:00:12.0:
new USB bus registered, assigned bus number 3
May 17 11:11:07 testbed1 kernel: [ 1.112117] ohci_hcd 0000:00:12.0:
irq 16, io mem 0xf3204000
May 17 11:11:07 testbed1 kernel: [ 1.123167] tg3 0000:3f:00.0: eth0:
Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address
d4:85:64:09:41:23
May 17 11:11:07 testbed1 kernel: [ 1.123170] tg3 0000:3f:00.0: eth0:
attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1])
May 17 11:11:07 testbed1 kernel: [ 1.123172] tg3 0000:3f:00.0: eth0:
RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
May 17 11:11:07 testbed1 kernel: [ 1.123175] tg3 0000:3f:00.0: eth0:
dma_rwctrl[76180000] dma_mask[64-bit]
May 17 11:11:07 testbed1 kernel: [ 1.172098] usb usb3: New USB device
found, idVendor=1d6b, idProduct=0001
May 17 11:11:07 testbed1 kernel: [ 1.172101] usb usb3: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
May 17 11:11:07 testbed1 kernel: [ 1.172103] usb usb3: Product: OHCI
Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.172105] usb usb3: Manufacturer:
Linux 2.6.38-2-amd64 ohci_hcd
May 17 11:11:07 testbed1 kernel: [ 1.172106] usb usb3: SerialNumber:
0000:00:12.0
May 17 11:11:07 testbed1 kernel: [ 1.172187] hub 3-0:1.0: USB hub found
May 17 11:11:07 testbed1 kernel: [ 1.172208] hub 3-0:1.0: 3 ports
detected
May 17 11:11:07 testbed1 kernel: [ 1.172327] ohci_hcd 0000:00:12.1:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 17 11:11:07 testbed1 kernel: [ 1.172339] ohci_hcd 0000:00:12.1:
OHCI Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.172345] ohci_hcd 0000:00:12.1:
new USB bus registered, assigned bus number 4
May 17 11:11:07 testbed1 kernel: [ 1.212105] ohci_hcd 0000:00:12.1:
irq 16, io mem 0xf3205000
May 17 11:11:07 testbed1 kernel: [ 1.272096] usb usb4: New USB device
found, idVendor=1d6b, idProduct=0001
May 17 11:11:07 testbed1 kernel: [ 1.272098] usb usb4: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
May 17 11:11:07 testbed1 kernel: [ 1.272100] usb usb4: Product: OHCI
Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.272101] usb usb4: Manufacturer:
Linux 2.6.38-2-amd64 ohci_hcd
May 17 11:11:07 testbed1 kernel: [ 1.272103] usb usb4: SerialNumber:
0000:00:12.1
May 17 11:11:07 testbed1 kernel: [ 1.272169] hub 4-0:1.0: USB hub found
May 17 11:11:07 testbed1 kernel: [ 1.272174] hub 4-0:1.0: 3 ports
detected
May 17 11:11:07 testbed1 kernel: [ 1.272280] ohci_hcd 0000:00:13.0:
PCI INT A -> GSI 18 (level, low) -> IRQ 18
May 17 11:11:07 testbed1 kernel: [ 1.272288] ohci_hcd 0000:00:13.0:
OHCI Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.272294] ohci_hcd 0000:00:13.0:
new USB bus registered, assigned bus number 5
May 17 11:11:07 testbed1 kernel: [ 1.304144] ohci_hcd 0000:00:13.0:
irq 18, io mem 0xf3206000
May 17 11:11:07 testbed1 kernel: [ 1.364096] usb usb5: New USB device
found, idVendor=1d6b, idProduct=0001
May 17 11:11:07 testbed1 kernel: [ 1.364098] usb usb5: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
May 17 11:11:07 testbed1 kernel: [ 1.364099] usb usb5: Product: OHCI
Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.364101] usb usb5: Manufacturer:
Linux 2.6.38-2-amd64 ohci_hcd
May 17 11:11:07 testbed1 kernel: [ 1.364102] usb usb5: SerialNumber:
0000:00:13.0
May 17 11:11:07 testbed1 kernel: [ 1.364167] hub 5-0:1.0: USB hub found
May 17 11:11:07 testbed1 kernel: [ 1.364172] hub 5-0:1.0: 3 ports
detected
May 17 11:11:07 testbed1 kernel: [ 1.364273] ohci_hcd 0000:00:13.1:
PCI INT A -> GSI 18 (level, low) -> IRQ 18
May 17 11:11:07 testbed1 kernel: [ 1.364281] ohci_hcd 0000:00:13.1:
OHCI Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.364287] ohci_hcd 0000:00:13.1:
new USB bus registered, assigned bus number 6
May 17 11:11:07 testbed1 kernel: [ 1.364318] ohci_hcd 0000:00:13.1:
irq 18, io mem 0xf3207000
May 17 11:11:07 testbed1 kernel: [ 1.400112] ata5: SATA link down
(SStatus 0 SControl 300)
May 17 11:11:07 testbed1 kernel: [ 1.400143] ata6: SATA link down
(SStatus 0 SControl 300)
May 17 11:11:07 testbed1 kernel: [ 1.400174] ata1: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
May 17 11:11:07 testbed1 kernel: [ 1.400200] ata3: SATA link down
(SStatus 0 SControl 300)
May 17 11:11:07 testbed1 kernel: [ 1.400232] ata4: SATA link down
(SStatus 0 SControl 300)
May 17 11:11:07 testbed1 kernel: [ 1.406594] ata1.00: ACPI cmd
ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.406596] ata1.00: ACPI cmd
ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.406854] ata1.00: ACPI cmd
b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.406856] ata1.00: ACPI cmd
f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.413260] ata1.00: ATA-8: SAMSUNG
HD161GJ, 1AC01118, max UDMA/100
May 17 11:11:07 testbed1 kernel: [ 1.413262] ata1.00: 312581808
sectors, multi 16: LBA48 NCQ (depth 31/32), AA
May 17 11:11:07 testbed1 kernel: [ 1.419712] ata1.00: ACPI cmd
ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.419714] ata1.00: ACPI cmd
ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.419976] ata1.00: ACPI cmd
b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.419978] ata1.00: ACPI cmd
f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.424068] usb usb6: New USB device
found, idVendor=1d6b, idProduct=0001
May 17 11:11:07 testbed1 kernel: [ 1.424070] usb usb6: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
May 17 11:11:07 testbed1 kernel: [ 1.424072] usb usb6: Product: OHCI
Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.424073] usb usb6: Manufacturer:
Linux 2.6.38-2-amd64 ohci_hcd
May 17 11:11:07 testbed1 kernel: [ 1.424075] usb usb6: SerialNumber:
0000:00:13.1
May 17 11:11:07 testbed1 kernel: [ 1.424145] hub 6-0:1.0: USB hub found
May 17 11:11:07 testbed1 kernel: [ 1.424150] hub 6-0:1.0: 3 ports
detected
May 17 11:11:07 testbed1 kernel: [ 1.424254] ohci_hcd 0000:00:14.5:
PCI INT C -> GSI 18 (level, low) -> IRQ 18
May 17 11:11:07 testbed1 kernel: [ 1.424265] ohci_hcd 0000:00:14.5:
OHCI Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.424271] ohci_hcd 0000:00:14.5:
new USB bus registered, assigned bus number 7
May 17 11:11:07 testbed1 kernel: [ 1.424301] ohci_hcd 0000:00:14.5:
irq 18, io mem 0xf3208000
May 17 11:11:07 testbed1 kernel: [ 1.426389] ata1.00: configured for
UDMA/100
May 17 11:11:07 testbed1 kernel: [ 1.426536] scsi 0:0:0:0:
Direct-Access ATA SAMSUNG HD161GJ 1AC0 PQ: 0 ANSI: 5
May 17 11:11:07 testbed1 kernel: [ 1.484082] usb usb7: New USB device
found, idVendor=1d6b, idProduct=0001
May 17 11:11:07 testbed1 kernel: [ 1.484084] usb usb7: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
May 17 11:11:07 testbed1 kernel: [ 1.484086] usb usb7: Product: OHCI
Host Controller
May 17 11:11:07 testbed1 kernel: [ 1.484088] usb usb7: Manufacturer:
Linux 2.6.38-2-amd64 ohci_hcd
May 17 11:11:07 testbed1 kernel: [ 1.484089] usb usb7: SerialNumber:
0000:00:14.5
May 17 11:11:07 testbed1 kernel: [ 1.484162] hub 7-0:1.0: USB hub found
May 17 11:11:07 testbed1 kernel: [ 1.484167] hub 7-0:1.0: 2 ports
detected
May 17 11:11:07 testbed1 kernel: [ 1.608091] usb 4-3: new low speed
USB device using ohci_hcd and address 2
May 17 11:11:07 testbed1 kernel: [ 1.768037] Refined TSC clocksource
calibration: 2992.498 MHz.
May 17 11:11:07 testbed1 kernel: [ 1.768040] Switching to clocksource tsc
May 17 11:11:07 testbed1 kernel: [ 1.782170] usb 4-3: New USB device
found, idVendor=03f0, idProduct=0024
May 17 11:11:07 testbed1 kernel: [ 1.782173] usb 4-3: New USB device
strings: Mfr=1, Product=2, SerialNumber=0
May 17 11:11:07 testbed1 kernel: [ 1.782175] usb 4-3: Product: HP
Basic USB Keyboard
May 17 11:11:07 testbed1 kernel: [ 1.782176] usb 4-3: Manufacturer:
CHICONY
May 17 11:11:07 testbed1 kernel: [ 1.804092] ata2: SATA link up 1.5
Gbps (SStatus 113 SControl 300)
May 17 11:11:07 testbed1 kernel: [ 1.805722] ata2.00: ACPI cmd
ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.805725] ata2.00: ACPI cmd
ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.805728] ata2.00: ATAPI: hp
DVD RW AD-7251H5, 1H8A, max UDMA/100
May 17 11:11:07 testbed1 kernel: [ 1.807716] ata2.00: ACPI cmd
ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.807719] ata2.00: ACPI cmd
ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
May 17 11:11:07 testbed1 kernel: [ 1.807722] ata2.00: configured for
UDMA/100
May 17 11:11:07 testbed1 kernel: [ 1.809561] scsi 1:0:0:0: CD-ROM
hp DVD RW AD-7251H5 1H8A PQ: 0 ANSI: 5
May 17 11:11:07 testbed1 kernel: [ 1.816176] sd 0:0:0:0: [sda]
312581808 512-byte logical blocks: (160 GB/149 GiB)
May 17 11:11:07 testbed1 kernel: [ 1.816204] sd 0:0:0:0: [sda] Write
Protect is off
May 17 11:11:07 testbed1 kernel: [ 1.816226] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 17 11:11:07 testbed1 kernel: [ 1.819313] sr0: scsi3-mmc drive:
40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
May 17 11:11:07 testbed1 kernel: [ 1.819316] cdrom: Uniform CD-ROM
driver Revision: 3.20
May 17 11:11:07 testbed1 kernel: [ 1.840136] input: CHICONY HP Basic
USB Keyboard as
/devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input0
May 17 11:11:07 testbed1 kernel: [ 1.840176] generic-usb
0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP
Basic USB Keyboard] on usb-0000:00:12.1-3/input0
May 17 11:11:07 testbed1 kernel: [ 1.840189] usbcore: registered new
interface driver usbhid
May 17 11:11:07 testbed1 kernel: [ 1.840190] usbhid: USB HID core driver
May 17 11:11:07 testbed1 kernel: [ 1.852555] sda: sda1 sda2
May 17 11:11:07 testbed1 kernel: [ 1.852756] sd 0:0:0:0: [sda]
Attached SCSI disk
May 17 11:11:07 testbed1 kernel: [ 1.855571] sd 0:0:0:0: Attached
scsi generic sg0 type 0
May 17 11:11:07 testbed1 kernel: [ 1.855626] sr 1:0:0:0: Attached
scsi generic sg1 type 5
May 17 11:11:07 testbed1 kernel: [ 2.054633] PM: Starting manual
resume from disk
May 17 11:11:07 testbed1 kernel: [ 2.091127] EXT3-fs: barriers not
enabled
May 17 11:11:07 testbed1 kernel: [ 2.107785] kjournald starting.
Commit interval 5 seconds
May 17 11:11:07 testbed1 kernel: [ 2.107818] EXT3-fs (sda1): mounted
filesystem with ordered data mode
May 17 11:11:07 testbed1 kernel: [ 3.179618] udev[409]: starting
version 164
May 17 11:11:07 testbed1 kernel: [ 3.504944] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
May 17 11:11:07 testbed1 kernel: [ 3.552010] ACPI: Power Button [PBTN]
May 17 11:11:07 testbed1 kernel: [ 3.552065] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
May 17 11:11:07 testbed1 kernel: [ 3.552089] ACPI: Power Button [PWRF]
May 17 11:11:07 testbed1 kernel: [ 3.554754] input: PC Speaker as
/devices/platform/pcspkr/input/input3
May 17 11:11:07 testbed1 kernel: [ 3.595082] wmi: Mapper loaded
May 17 11:11:07 testbed1 kernel: [ 3.606656] piix4_smbus
0000:00:14.0: SMBus Host Controller at 0xfc00, revision 0
May 17 11:11:07 testbed1 kernel: [ 3.702997] HDA Intel 0000:00:14.2:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 17 11:11:07 testbed1 kernel: [ 3.751164] MCE: In-kernel MCE
decoding enabled.
May 17 11:11:07 testbed1 kernel: [ 3.949432] ACPI: processor limited
to max C-state 1
May 17 11:11:07 testbed1 kernel: [ 3.973140] hda_codec: ALC662 rev1:
BIOS auto-probing.
May 17 11:11:07 testbed1 kernel: [ 3.977317] input: HDA ATI SB
Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
May 17 11:11:07 testbed1 kernel: [ 3.977460] HDA Intel 0000:02:00.1:
PCI INT A -> GSI 18 (level, low) -> IRQ 18
May 17 11:11:07 testbed1 kernel: [ 3.977462] hda_intel: Disable MSI
for Nvidia chipset
May 17 11:11:07 testbed1 kernel: [ 4.078460] tpm_tis 00:09: 1.2 TPM
(device-id 0xB, rev-id 16)
May 17 11:11:07 testbed1 kernel: [ 4.092969] EDAC MC: Ver: 2.1.0 Apr
23 2011
May 17 11:11:07 testbed1 kernel: [ 4.104181] EDAC amd64_edac: v3.3.0
May 17 11:11:07 testbed1 kernel: [ 4.104225] EDAC amd64: DRAM ECC
disabled.
May 17 11:11:07 testbed1 kernel: [ 4.104231] EDAC amd64: ECC disabled
in the BIOS or no ECC capability, module will not load.
May 17 11:11:07 testbed1 kernel: [ 4.104232] Either enable ECC
checking or force module loading by setting 'ecc_enable_override'.
May 17 11:11:07 testbed1 kernel: [ 4.104233] (Note that use of the
override may cause unknown side effects.)
May 17 11:11:07 testbed1 kernel: [ 4.244591] input: HP WMI hotkeys as
/devices/virtual/input/input5
May 17 11:11:07 testbed1 kernel: [ 4.260462] [drm] Initialized drm
1.1.0 20060810
May 17 11:11:07 testbed1 kernel: [ 4.924408] nouveau 0000:02:00.0:
PCI INT A -> GSI 18 (level, low) -> IRQ 18
May 17 11:11:07 testbed1 kernel: [ 4.926918] [drm] nouveau
0000:02:00.0: Detected an NV50 generation card (0x0a8180a2)
May 17 11:11:07 testbed1 kernel: [ 4.930191] [drm] nouveau
0000:02:00.0: Attempting to load BIOS image from PRAMIN
May 17 11:11:07 testbed1 kernel: [ 5.003398] [drm] nouveau
0000:02:00.0: ... appears to be valid
May 17 11:11:07 testbed1 kernel: [ 5.003400] [drm] nouveau
0000:02:00.0: BIT BIOS found
May 17 11:11:07 testbed1 kernel: [ 5.003402] [drm] nouveau
0000:02:00.0: Bios version 70.18.5b.00
May 17 11:11:07 testbed1 kernel: [ 5.003488] [drm] nouveau
0000:02:00.0: TMDS table version 2.0
May 17 11:11:07 testbed1 kernel: [ 5.003490] [drm] nouveau
0000:02:00.0: Found Display Configuration Block version 4.0
May 17 11:11:07 testbed1 kernel: [ 5.003493] [drm] nouveau
0000:02:00.0: Raw DCB entry 0: 02000300 00000000
May 17 11:11:07 testbed1 kernel: [ 5.003495] [drm] nouveau
0000:02:00.0: Raw DCB entry 1: 01000302 00020030
May 17 11:11:07 testbed1 kernel: [ 5.003496] [drm] nouveau
0000:02:00.0: Raw DCB entry 2: 048113b6 0f220010
May 17 11:11:07 testbed1 kernel: [ 5.003498] [drm] nouveau
0000:02:00.0: Raw DCB entry 3: 04011372 00020010
May 17 11:11:07 testbed1 kernel: [ 5.003501] [drm] nouveau
0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
May 17 11:11:07 testbed1 kernel: [ 5.003503] [drm] nouveau
0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
May 17 11:11:07 testbed1 kernel: [ 5.003505] [drm] nouveau
0000:02:00.0: 1: 0x00202146: type 0x46 idx 1 tag 0x08
May 17 11:11:07 testbed1 kernel: [ 5.003509] [drm] nouveau
0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD9C1
May 17 11:11:07 testbed1 kernel: [ 5.064073] [drm] nouveau
0000:02:00.0: 0xDC8E: Condition still not met after 20ms, skipping
following opcodes
May 17 11:11:07 testbed1 kernel: [ 5.088077] [drm] nouveau
0000:02:00.0: 0xDC92: Condition still not met after 20ms, skipping
following opcodes
May 17 11:11:07 testbed1 kernel: [ 5.088097] [drm] nouveau
0000:02:00.0: Parsing VBIOS init table 1 at offset 0xDE6C
May 17 11:11:07 testbed1 kernel: [ 5.120070] [drm] nouveau
0000:02:00.0: Parsing VBIOS init table 2 at offset 0xEA3F
May 17 11:11:07 testbed1 kernel: [ 5.120076] [drm] nouveau
0000:02:00.0: Parsing VBIOS init table 3 at offset 0xEA58
May 17 11:11:07 testbed1 kernel: [ 5.169633] [drm] nouveau
0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEB3F
May 17 11:11:07 testbed1 kernel: [ 5.169635] [drm] nouveau
0000:02:00.0: Parsing VBIOS init table at offset 0xEBA4
May 17 11:11:07 testbed1 kernel: [ 5.192074] [drm] nouveau
0000:02:00.0: 0xD835: Condition still not met after 20ms, skipping
following opcodes
May 17 11:11:07 testbed1 kernel: [ 6.247805] [drm] nouveau
0000:02:00.0: 3 available performance level(s)
May 17 11:11:07 testbed1 kernel: [ 6.247808] [drm] nouveau
0000:02:00.0: 0: memory 135MHz core 135MHz shader 270MHz voltage 850mV
May 17 11:11:07 testbed1 kernel: [ 6.247810] [drm] nouveau
0000:02:00.0: 1: memory 405MHz core 405MHz shader 810MHz voltage 900mV
May 17 11:11:07 testbed1 kernel: [ 6.247813] [drm] nouveau
0000:02:00.0: 3: memory 790MHz core 589MHz shader 1402MHz voltage 1000mV
May 17 11:11:07 testbed1 kernel: [ 6.247825] [drm] nouveau
0000:02:00.0: c: memory 950MHz core 550MHz shader 1400MHz voltage 900mV
May 17 11:11:07 testbed1 kernel: [ 6.247930] [TTM] Zone kernel:
Available graphics memory: 4097356 kiB.
May 17 11:11:07 testbed1 kernel: [ 6.247931] [TTM] Zone dma32:
Available graphics memory: 2097152 kiB.
May 17 11:11:07 testbed1 kernel: [ 6.247933] [TTM] Initializing pool
allocator.
May 17 11:11:07 testbed1 kernel: [ 6.247945] [drm] nouveau
0000:02:00.0: Detected 512MiB VRAM
May 17 11:11:07 testbed1 kernel: [ 6.247958] mtrr: type mismatch for
e0000000,10000000 old: write-back new: write-combining
May 17 11:11:07 testbed1 kernel: [ 6.255515] [drm] nouveau
0000:02:00.0: 512 MiB GART (aperture)
May 17 11:11:07 testbed1 kernel: [ 6.269357] [drm] Supports vblank
timestamp caching Rev 1 (10.10.2010).
May 17 11:11:07 testbed1 kernel: [ 6.269359] [drm] No driver support
for vblank timestamp query.
May 17 11:11:07 testbed1 kernel: [ 6.473130] [drm] nouveau
0000:02:00.0: allocated 1280x1024 fb: 0x60000000, bo ffff880215072000
May 17 11:11:07 testbed1 kernel: [ 6.479696] Console: switching to
colour frame buffer device 160x64
May 17 11:11:07 testbed1 kernel: [ 6.481722] fb0: nouveaufb frame
buffer device
May 17 11:11:07 testbed1 kernel: [ 6.481723] drm: registered panic
notifier
May 17 11:11:07 testbed1 kernel: [ 6.481728] [drm] Initialized
nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
May 17 11:11:07 testbed1 kernel: [ 6.868548] Adding 8385924k swap on
/dev/sda2. Priority:-1 extents:1 across:8385924k
May 17 11:11:07 testbed1 kernel: [ 7.047151] EXT3-fs (sda1): using
internal journal
May 17 11:11:07 testbed1 kernel: [ 7.189546] loop: module loaded
May 17 11:11:08 testbed1 kernel: [ 9.819452] ADDRCONF(NETDEV_UP):
eth0: link is not ready
May 17 11:11:09 testbed1 kernel: [ 10.742395] sshd (1044):
/proc/1044/oom_adj is deprecated, please use /proc/1044/oom_score_adj
instead.
May 17 11:11:10 testbed1 kernel: [ 12.182422] tg3 0000:3f:00.0: eth0:
Link is up at 1000 Mbps, full duplex
May 17 11:11:10 testbed1 kernel: [ 12.182425] tg3 0000:3f:00.0: eth0:
Flow control is off for TX and off for RX
May 17 11:11:10 testbed1 kernel: [ 12.183274] ADDRCONF(NETDEV_CHANGE):
eth0: link becomes ready
May 17 11:16:33 testbed1 kernel: [ 334.522217] Clocksource tsc unstable
(delta = 7908394586 ns)
May 17 11:16:34 testbed1 kernel: [ 334.526416] Switching to clocksource
hpet
--
Dave Parker
Systems Administrator
Utica College
Integrated Information Technology Services
(315) 792-3229
Registered Linux User #408177
Reply to: