Bug#599368: NMI watchdog failed to create perf event on cpu0: ffffffa1
Package: linux-2.6
Version: 2.6.36~rc6-1~experimental.1
Severity: minor
File: /boot/vmlinuz-2.6.36-rc6-686
Hi,
since the upgrade from rc5 to rc6, I get the following error message on
the console during boot:
NMI watchdog failed to create perf event on cpu0: ffffffa1
With a bit more context:
[ 0.008303] Performance Events:
[ 0.008306] no APIC, boot with the "lapic" boot parameter to
force-enable it.
[ 0.008309] no hardware sampling interrupt available.
[ 0.008311] p6 PMU driver.
[ 0.008319] ... version: 0
[ 0.008321] ... bit width: 32
[ 0.008324] ... generic registers: 2
[ 0.008326] ... value mask: 00000000ffffffff
[ 0.008329] ... max period: 000000007fffffff
[ 0.008331] ... fixed-purpose events: 0
[ 0.008334] ... event mask: 0000000000000003
[ 0.008815] SMP alternatives: switching to UP code
[ 0.013737] Freeing SMP alternatives: 16k freed
[ 0.013743] ACPI: Core revision 20100702
[ 0.021860] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.024070] weird, boot CPU (#0) not listed by the BIOS.
[ 0.024073] SMP motherboard not detected.
[ 0.024076] Local APIC not detected. Using dummy APIC emulation.
[ 0.024078] SMP disabled
[ 0.024189] NMI watchdog failed to create perf event on cpu0:
ffffffa1
[ 0.028266] Brought up 1 CPUs
[ 0.028270] Total of 1 processors activated (3189.83 BogoMIPS).
-- Package-specific info:
** Version:
Linux version 2.6.36-rc6-686 (Debian 2.6.36~rc6-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 20100902 (prerelease) (Debian 4.4.4-13) ) #1 SMP Mon Oct 4 10:25:13 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.36-rc6-686 root=UUID=9a6d2bd2-58d1-4a75-baff-166b8637e3cc ro quiet
** Not tainted
** Kernel log:
[ 4.301432] init[1]: systemd 10 running in system mode. (+PAM +LIBWRAP -AUDIT +SELINUX +SYSVINIT; debian)
[ 4.557097] init[1]: Set hostname to <pluto>.
[ 5.749668] init[1]: hostname.service lacks ExecStart setting. Refusing.
[ 6.010413] init[1]: x11-common.service lacks ExecStart setting. Refusing.
[ 17.410690] udev: starting version 161
[ 17.773447] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 17.789846] ACPI: AC Adapter [C134] (on-line)
[ 17.841354] i801_smbus 0000:00:1f.3: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 17.891393] intel_rng: FWH not detected
[ 17.939770] ACPI: acpi_idle registered with cpuidle
[ 17.939929] Marking TSC unstable due to TSC halts in idle
[ 17.959641] Switching to clocksource acpi_pm
[ 18.045347] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 18.118568] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.464425] ACPI: Battery Slot [C11F] (battery present)
[ 18.512881] parport_pc 00:05: reported by Plug and Play ACPI
[ 18.512934] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 18.671247] NET: Registered protocol family 23
[ 18.721710] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008/0x0
[ 18.743763] Detected unconfigured Compaq x1000 family SMSC IrDA chip, pre-configuring device.
[ 18.743768] Setting up Intel 82801 controller and SMSC device
[ 18.743902] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[ 18.743918] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x0e
[ 18.743935] SMsC IrDA Controller found
[ 18.743936] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[ 18.744042] No transceiver found. Defaulting to Fast pin select
[ 18.760098] lib80211: common routines for IEEE802.11 drivers
[ 18.760104] lib80211_crypt: registered algorithm 'NULL'
[ 18.761327] IrDA: Registered device irda0
[ 18.776289] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 19.073755] yenta_cardbus 0000:02:04.0: CardBus bridge found [0e11:0860]
[ 19.073778] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 19.073782] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 19.073788] yenta_cardbus 0000:02:04.0: TI: mfunc 0x001c1112, devctl 0x44
[ 19.116501] Bluetooth: Core ver 2.15
[ 19.116534] NET: Registered protocol family 31
[ 19.116537] Bluetooth: HCI device and connection manager initialized
[ 19.116541] Bluetooth: HCI socket layer initialized
[ 19.163789] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 19.167829] usbcore: registered new interface driver btusb
[ 19.191233] cfg80211: Calling CRDA to update world regulatory domain
[ 19.230169] libipw: 802.11 data/management/control stack, git-1.1.13
[ 19.230173] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 19.304638] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0818, PCI irq 5
[ 19.304644] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 19.304650] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 19.304664] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 19.304670] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x247f 0x2800-0x28ff 0x2c00-0x2cff
[ 19.310170] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x903fffff]
[ 19.310175] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x903fffff: excluding 0x90000000-0x9003ffff 0x90100000-0x9013ffff 0x90200000-0x9023ffff 0x90300000-0x9033ffff
[ 19.310196] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x30000000-0x33ffffff pref]
[ 19.310200] pcmcia_socket pcmcia_socket0: cs: memory probe 0x30000000-0x33ffffff: excluding 0x30000000-0x33ffffff
[ 19.479013] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 19.479018] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 19.479175] ipw2200 0000:02:02.0: PCI INT A -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 19.491678] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 19.694914] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 19.711021] udev: renamed network interface eth1 to wlan0
[ 20.183036] Adding 1020092k swap on /dev/sda5. Priority:-1 extents:1 across:1020092k
[ 20.194309] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 20.233055] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 20.233131] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 20.704999] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,errors=remount-ro
[ 20.854096] PPP generic driver version 2.4.2
[ 20.887968] device-mapper: uevent: version 1.0.3
[ 20.890337] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 21.156040] intel8x0_measure_ac97_clock: measured 55318 usecs (2665 samples)
[ 21.156045] intel8x0: clocking to 48000
[ 21.156420] audit: name_count maxed, losing inode data: dev=00:05, inode=5877
[ 21.156462] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 21.156468] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 21.156501] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 21.156507] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 21.156567] audit: name_count maxed, losing inode data: dev=00:05, inode=4989
[ 21.156574] audit: name_count maxed, losing inode data: dev=00:05, inode=4989
[ 21.156618] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 21.156624] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 21.157826] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 21.157852] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 21.820353] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 21.908315] fuse init (API version 7.15)
[ 23.131148] lp0: using parport0 (interrupt-driven).
[ 23.217953] ppdev: user-space parallel port driver
[ 23.789359] eth0: link down
[ 23.789628] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.832780] Bluetooth: L2CAP ver 2.15
[ 23.832784] Bluetooth: L2CAP socket layer initialized
[ 23.865169] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.865173] Bluetooth: BNEP filters: protocol multicast
[ 24.603017] Bluetooth: RFCOMM TTY layer initialized
[ 24.603025] Bluetooth: RFCOMM socket layer initialized
[ 24.603028] Bluetooth: RFCOMM ver 1.11
[ 24.617539] Bluetooth: SCO (Voice Link) ver 0.6
[ 24.617544] Bluetooth: SCO socket layer initialized
[ 24.629562] lib80211_crypt: registered algorithm 'CCMP'
[ 24.701560] padlock: VIA PadLock not detected.
[ 24.854320] lib80211_crypt: registered algorithm 'TKIP'
[ 33.344069] type=1305 audit(1286402950.422:20465): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
[ 33.344086] type=1305 audit(1286402950.422:20466): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
[ 34.144025] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
michael_mic 1470 4
arc4 1002 2
acpi_cpufreq 4547 0
ecb 1413 2
mperf 967 1 acpi_cpufreq
lib80211_crypt_tkip 6623 1
cpufreq_userspace 1508 0
aes_i586 6828 1
cpufreq_stats 1934 0
aes_generic 25766 1 aes_i586
lib80211_crypt_ccmp 3577 1
sco 5855 2
rfcomm 24284 8
cpufreq_powersave 614 0
bnep 7506 2
l2cap 26340 16 rfcomm,bnep
cpufreq_conservative 6190 0
ppdev 4475 0
lp 5806 0
fuse 47318 3
binfmt_misc 4982 1
dm_crypt 8927 0
dm_mod 49208 1 dm_crypt
ppp_generic 16058 0
slhc 3494 1 ppp_generic
snd_intel8x0m 8048 0
snd_intel8x0 19511 3
snd_ac97_codec 76621 2 snd_intel8x0m,snd_intel8x0
ac97_bus 722 1 snd_ac97_codec
snd_pcm_oss 27474 0
snd_mixer_oss 10359 1 snd_pcm_oss
snd_pcm 46944 5 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
ipw2200 107197 0
snd_seq_midi 3602 0
pcmcia 24418 0
snd_rawmidi 12629 1 snd_seq_midi
libipw 18014 1 ipw2200
snd_seq_midi_event 3750 1 snd_seq_midi
btusb 7851 2
snd_seq 34720 2 snd_seq_midi,snd_seq_midi_event
cfg80211 98083 2 ipw2200,libipw
yenta_socket 15472 0
snd_timer 12485 3 snd_pcm,snd_seq
bluetooth 36946 9 sco,rfcomm,bnep,l2cap,btusb
pcmcia_rsrc 7260 1 yenta_socket
joydev 6976 0
snd_seq_device 3659 3 snd_seq_midi,snd_rawmidi,snd_seq
pcmcia_core 8261 3 pcmcia,yenta_socket,pcmcia_rsrc
rfkill 10822 4 cfg80211,bluetooth
lib80211 2894 4 lib80211_crypt_tkip,lib80211_crypt_ccmp,ipw2200,libipw
smsc_ircc2 8602 0
container 1853 0
irda 72076 1 smsc_ircc2
parport_pc 15625 1
snd 34129 14 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
crc_ccitt 1047 1 irda
parport 21222 3 ppdev,lp,parport_pc
tpm_tis 5313 0
shpchp 18111 0
pci_hotplug 16971 1 shpchp
serio_raw 2902 0
soundcore 3426 1 snd
tpm 7955 1 tpm_tis
battery 4130 0
psmouse 38333 0
processor 22795 2 acpi_cpufreq
tpm_bios 3573 1 tpm
snd_page_alloc 5057 3 snd_intel8x0m,snd_intel8x0,snd_pcm
evdev 5519 11
i2c_i801 6346 0
ac 1656 0
pcspkr 1219 0
rng_core 2298 0
autofs4 16557 6
ext4 233438 2
mbcache 3776 1 ext4
jbd2 48151 1 ext4
crc16 1035 2 l2cap,ext4
sg 15867 0
sd_mod 24194 5
sr_mod 11037 0
cdrom 25872 1 sr_mod
crc_t10dif 1020 1 sd_mod
ata_generic 1983 0
radeon 595990 2
ata_piix 17364 4
ttm 36490 1 radeon
drm_kms_helper 19053 1 radeon
libata 115536 2 ata_generic,ata_piix
uhci_hcd 15722 0
ehci_hcd 27967 0
drm 121418 4 radeon,ttm,drm_kms_helper
wbsd 8449 0
scsi_mod 128128 4 sg,sr_mod,sd_mod,libata
usbcore 94906 4 btusb,uhci_hcd,ehci_hcd
firewire_ohci 19087 0
i2c_algo_bit 3373 1 radeon
8139too 14604 0
mmc_core 44504 1 wbsd
video 15297 0
8139cp 13204 0
i2c_core 12934 5 i2c_i801,radeon,drm_kms_helper,drm,i2c_algo_bit
output 1212 1 video
firewire_core 35444 1 firewire_ohci
thermal 9458 0
thermal_sys 9328 3 processor,video,thermal
mii 2714 2 8139too,8139cp
button 3610 0
crc_itu_t 1039 1 firewire_core
nls_base 4521 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03)
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at b0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 90400000-904fffff
Prefetchable memory behind bridge: 98000000-9fffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 48c0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 48e0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 4: I/O ports at 4c00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 5
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90000000-903fffff
Prefetchable memory behind bridge: 30000000-33ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 4c40 [size=16]
Region 5: Memory at 34000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 4c20 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 4000 [size=256]
Region 1: I/O ports at 4880 [size=64]
Region 2: Memory at a0200000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at a0300000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 4400 [size=256]
Region 1: I/O ports at 4800 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] [1002:4c66] (rev 01) (prog-if 00 [VGA controller])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at 90400000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 90420000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 90200000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 2400 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 20)
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at 90300000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139cp
02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:12f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
02:04.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410]
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 90100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 38000000-3bfff000
I/O window 0: 00002800-000028ff
I/O window 1: 00002c00-00002cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
** USB devices:
Bus 004 Device 002: ID 049f:0086 Compaq Computer Corp. Bluetooth Device
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (200, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.36-rc6-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.36-rc6-686 depends on:
ii debconf [deb 1.5.36 Debian configuration management sy
ii initramfs-to 0.98.4 tools for generating an initramfs
ii linux-base 2.6.36~rc6-1~experimental.1 Linux image base package
ii module-init- 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.36-rc6-686 recommends:
ii firmware-linux-free 2.6.32-24 Binary firmware for various driver
ii libc6-i686 2.11.2-6 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.36-rc6-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.36 <none> (no description available)
Versions of packages linux-image-2.6.36-rc6-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
ii firmware-ipw2x00 0.27 Binary firmware for Intel Pro Wire
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.27 Binary firmware for various driver
ii firmware-linux-nonfree 0.27 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.36-rc6-686/postinst/missing-firmware-2.6.36-rc6-686:
linux-image-2.6.36-rc6-686/postinst/depmod-error-initrd-2.6.36-rc6-686: false
linux-image-2.6.36-rc6-686/prerm/removing-running-kernel-2.6.36-rc6-686: true
linux-image-2.6.36-rc6-686/postinst/ignoring-do-bootloader-2.6.36-rc6-686:
Reply to: