--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.30-1-alpha-smp: fails to load fw for 1st scsi adapter
- From: "R. Scott Bailey" <scott.bailey@eds.com>
- Date: Fri, 31 Jul 2009 11:36:38 -0400
- Message-id: <20090731153638.5029.21973.reportbug@hamster.dsddi.eds.com>
Package: linux-image-2.6.30-1-alpha-smp
Version: 2.6.30-2
Severity: important
Well, the firmware loading logic has been flaky on my system for a few
releases now. I previously reported bug 527265 against 2.6.29, where the
qla1040 firmware would not load at all, and that was resolved in a later
2.6.29 image.
In this release (2.6.30-2) I get new/different bad behavior. My system
has three QLA1040 cards in it. In the attached console output from the boot,
notice that at time 23.256824, the first adapter (scsi0) is located,
generates a stack trace trying to load firmware, and fails to initialize
the card. (There goes my tape drive!) A little later, at 83.499957, the
second adapter is found and this time the firmware loads fine. Ditto for
the third adapter after that.
-- Package-specific info:
-- System Information:
Debian Release: 5.0.2
Architecture: alpha
Kernel: Linux 2.6.29-2-alpha-smp (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-1-alpha-smp depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.30-1-alpha-smp recommends no packages.
Versions of packages linux-image-2.6.30-1-alpha-smp suggests:
ii aboot 1.0~pre20040408-3 Linux bootloader for the SRM conso
ii fdutils 5.5-20060227-3 Linux floppy utilities
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-1-alpha-smp/postinst/depmod-error-initrd-2.6.30-1-alpha-smp: false
linux-image-2.6.30-1-alpha-smp/postinst/create-kimage-link-2.6.30-1-alpha-smp: true
linux-image-2.6.30-1-alpha-smp/preinst/lilo-initrd-2.6.30-1-alpha-smp: true
linux-image-2.6.30-1-alpha-smp/preinst/abort-install-2.6.30-1-alpha-smp:
linux-image-2.6.30-1-alpha-smp/postinst/depmod-error-2.6.30-1-alpha-smp: false
linux-image-2.6.30-1-alpha-smp/prerm/removing-running-kernel-2.6.30-1-alpha-smp: true
linux-image-2.6.30-1-alpha-smp/prerm/would-invalidate-boot-loader-2.6.30-1-alpha-smp: true
linux-image-2.6.30-1-alpha-smp/postinst/bootloader-test-error-2.6.30-1-alpha-smp:
linux-image-2.6.30-1-alpha-smp/preinst/initrd-2.6.30-1-alpha-smp:
linux-image-2.6.30-1-alpha-smp/postinst/kimage-is-a-directory:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-alpha-smp/preinst/lilo-has-ramdisk:
linux-image-2.6.30-1-alpha-smp/preinst/elilo-initrd-2.6.30-1-alpha-smp: true
linux-image-2.6.30-1-alpha-smp/preinst/overwriting-modules-2.6.30-1-alpha-smp: true
linux-image-2.6.30-1-alpha-smp/postinst/bootloader-error-2.6.30-1-alpha-smp:
linux-image-2.6.30-1-alpha-smp/preinst/abort-overwrite-2.6.30-1-alpha-smp:
linux-image-2.6.30-1-alpha-smp/preinst/bootloader-initrd-2.6.30-1-alpha-smp: true
linux-image-2.6.30-1-alpha-smp/postinst/old-initrd-link-2.6.30-1-alpha-smp: true
linux-image-2.6.30-1-alpha-smp/postinst/old-dir-initrd-link-2.6.30-1-alpha-smp: true
linux-image-2.6.30-1-alpha-smp/postinst/old-system-map-link-2.6.30-1-alpha-smp: true
linux-image-2.6.30-1-alpha-smp/preinst/failed-to-move-modules-2.6.30-1-alpha-smp:
P00>>>boot -fl 1
Initializing...
SROM V3.0 on cpu0
SROM V3.0 on cpu2
SROM V3.0 on cpu1
XSROM V6.0 on cpu1
XSROM V6.0 on cpu2
XSROM V6.0 on cpu0
BCache testing complete on cpu1
BCache testing complete on cpu2
BCache testing complete on cpu0
mem_pair0 - 2048 MB
mem_pair1 - 1024 MB
mem_pair2 - 1024 MB
20..20..20..21..21..21..23..
please wait 80 seconds for T24 to complete
24..24..24..
Memory testing complete on cpu0
Memory testing complete on cpu1
Memory testing complete on cpu2
starting console on CPU 0
sizing memory
0 2048 MB EDO
1 1024 MB EDO
2 1024 MB EDO
starting console on CPU 1
starting console on CPU 2
probing IOD1 hose 1
bus 0 slot 1 - NCR 53C810
bus 0 slot 2 - PCI-PCI Bridge
probing PCI-PCI Bridge, bus 2
bus 2 slot 0 - QLogic ISP10X0
bus 0 slot 3 - DE500-BA
probing IOD0 hose 0
bus 0 slot 1 - PCEB
probing EISA Bridge, bus 1
bus 0 slot 3 - DECchip 21140-AA
bus 0 slot 4 - PCI-PCI Bridge
probing PCI-PCI Bridge, bus 2
bus 2 slot 0 - QLogic ISP10X0
bus 0 slot 5 - PCI-PCI Bridge
probing PCI-PCI Bridge, bus 3
bus 3 slot 0 - QLogic ISP10X0
configuring I/O adapters...
ncr0, hose 1, bus 0, slot 1
isp0, hose 1, bus 2, slot 0
tulip0, hose 1, bus 0, slot 3
floppy0, hose 0, bus 1, slot 0
tulip1, hose 0, bus 0, slot 3
isp1, hose 0, bus 2, slot 0
isp2, hose 0, bus 3, slot 0
System temperature is 22 degrees C
AlphaServer 4100 Console V6.0-4, 10-MAY-2001 10:11:42
CPU 0 booting
(boot dkb0.0.0.2000.1 -flags 1)
block 0 of dkb0.0.0.2000.1 is a valid boot block
reading 158 blocks from dkb0.0.0.2000.1
bootstrap code read in
Building FRU table
base = 200000, image_start = 0, image_bytes = 13c00
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
aboot: Linux/Alpha SRM bootloader version 1.0_pre20040408
aboot: switching to OSF/1 PALcode version 1.23
aboot: booting from device 'SCSI 1 2000 0 0 0 1011 10201077'
aboot: valid disklabel found: 4 partitions.
aboot: loading uncompressed vmlinuz-2.6.30-1-alpha-smp...
aboot: loading compressed vmlinuz-2.6.30-1-alpha-smp...
aboot: zero-filling 4604752 bytes at 0xfffffc0001a47880
aboot: loading initrd (11477856 bytes/11208 blocks) at 0xfffffc013f3ca000
aboot: starting kernel vmlinuz-2.6.30-1-alpha-smp with arguments ro root=/dev/vg00/rootvol console=ttyS0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-1-alpha-smp (Debian 2.6.30-2) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-13) ) #1 SMP W
[ 0.000000] Booting GENERIC on Rawhide variation Dodge using machine vector Rawhide from SRM
[ 0.000000] Major Options: SMP MAGIC_SYSRQ
[ 0.000000] Command line: ro root=/dev/vg00/rootvol console=ttyS0
[ 0.000000] memcluster 0, usage 1, start 0, end 256
[ 0.000000] memcluster 1, usage 0, start 256, end 393216
[ 0.000000] memcluster 2, usage 0, start 524288, end 655351
[ 0.000000] memcluster 3, usage 1, start 655351, end 655360
[ 0.000000] freeing pages 256:2048
[ 0.000000] freeing pages 3928:393216
[ 0.000000] freeing pages 524288:655351
[ 0.000000] reserving pages 3928:3938
[ 0.000000] Initial ramdisk at: 0xfffffc013f3ca000 (11477856 bytes)
[ 0.000000] 4096K Bcache detected; load hit latency 28 cycles, load miss latency 115 cycles
[ 0.000000] SMP: 3 CPUs probed -- cpu_present_map = 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 650871
[ 0.000000] Kernel command line: ro root=/dev/vg00/rootvol console=ttyS0
[ 0.000000] NR_IRQS:32784
[ 0.000000] mcpcia_init_hoses: found 2 hoses
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] HWRPB cycle frequency bogus. Estimated 466236031 Hz
[ 0.000000] Using epoch = 2000
[ 0.000000] Turning on RTC interrupts.
[ 0.001953] Console: colour dummy device 80x25
[ 0.001953] console [ttyS0] enabled
[ 1.812499] Dentry cache hash table entries: 1048576 (order: 10, 8388608 bytes)
[ 1.966795] Inode-cache hash table entries: 524288 (order: 9, 4194304 bytes)
[ 2.568358] Memory: 4114816k/5242808k available (2699k kernel code, 76704k reserved, 263k data, 344k init)
[ 2.683592] Calibrating delay loop... 791.12 BogoMIPS (lpj=386048)
[ 2.778318] Security Framework initialized
[ 2.828123] Mount-cache hash table entries: 512
[ 2.882811] Initializing cgroup subsys ns
[ 2.931639] Initializing cgroup subsys cpuacct
[ 2.984373] Initializing cgroup subsys devices
[ 3.038084] Initializing cgroup subsys freezer
[ 3.090818] Initializing cgroup subsys net_cls
[ 3.144529] SMP starting up secondaries.
[ 3.200193] Calibrating delay loop... 793.68 BogoMIPS (lpj=387072)
[ 3.300779] Calibrating delay loop... 795.24 BogoMIPS (lpj=388096)
[ 3.392576] Brought up 3 CPUs
[ 3.428709] SMP: Total of 3 processors activated (2384.29 BogoMIPS).
[ 3.520506] net_namespace: 1936 bytes
[ 3.566404] regulator: core version 0.5
[ 3.613279] NET: Registered protocol family 16
[ 3.669919] EISA bus registered
[ 3.710935] pci: enabling save/restore of SRM state
[ 3.779294] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 3.849607] pci 0000:00:04.0: IO window: 0x8000-0x8fff
[ 3.913083] pci 0000:00:04.0: MEM window: 0x2200000-0x22fffff
[ 3.984372] pci 0000:00:04.0: PREFETCH window: disabled
[ 4.048826] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 4.120115] pci 0000:00:05.0: IO window: 0x9000-0x9fff
[ 4.183591] pci 0000:00:05.0: MEM window: 0x2300000-0x23fffff
[ 4.254880] pci 0000:00:05.0: PREFETCH window: disabled
[ 4.319333] pci 0001:03:02.0: PCI bridge, secondary bus 0001:04
[ 4.390622] pci 0001:03:02.0: IO window: 0x8000-0x8fff
[ 4.454099] pci 0001:03:02.0: MEM window: 0x2200000-0x22fffff
[ 4.525388] pci 0001:03:02.0: PREFETCH window: disabled
[ 4.603513] bio: create slab <bio-0> at 0
[ 4.657224] SCSI subsystem initialized
[ 4.712888] NET: Registered protocol family 2
[ 4.774411] IP route cache hash table entries: 262144 (order: 8, 2097152 bytes)
[ 4.874997] TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
[ 5.006833] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
[ 5.092770] TCP: Hash tables configured (established 524288 bind 65536)
[ 5.172848] TCP reno registered
[ 5.213864] NET: Registered protocol family 1
[ 5.266598] Trying to unpack rootfs image as initramfs...
[ 7.972652] Freeing initrd memory: 11208k freed
[ 8.033199] VFS: Disk quotas dquot_6.5.2
[ 8.081050] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 8.159175] msgmni has been set to 8059
[ 8.208003] alg: No test for stdrng (krng)
[ 8.256831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 8.345698] io scheduler noop registered
[ 8.392573] io scheduler anticipatory registered
[ 8.448237] io scheduler deadline registered
[ 8.499019] io scheduler cfq registered (default)
[ 8.555659] isapnp: Scanning for PnP cards...
[ 8.912104] isapnp: No Plug & Play device found
[ 8.995112] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 9.070307] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.142573] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 9.232417] brd: module loaded
[ 9.276362] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.335932] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.397456] mice: PS/2 mouse device common for all mice
[ 9.460932] EISA: Probing bus 0 at 0000:00:01.0
[ 9.515620] atkbd.c: keyboard reset failed on isa0060/serio0
[ 9.515620] EISA: Mainboard DEC6400 detected.
[ 9.634760] Cannot allocate resource for EISA slot 8
[ 9.695307] EISA: Detected 0 cards.
[ 9.741205] TCP cubic registered
[ 9.779291] atkbd.c: keyboard reset failed on isa0060/serio1
[ 9.779291] NET: Registered protocol family 17
[ 9.901362] registered taskstats version 1
[ 9.952143] /build/buildd-linux-2.6_2.6.30-2-alpha-q6OEGR/linux-2.6-2.6.30/debian/build/source_alpha_none/drivers/rtc/hctosys.c:
[ 10.124994] Freeing unused kernel memory: 344k freed
Loading, please wait...
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... [ 21.619129] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 21.698231] tulip0: EEPROM default media type Autosense.
[ 21.762684] tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
[ 21.863270] tulip0: MII transceiver #5 config 2100 status 780f advertising 01e1.
[ 21.959949] eth0: Digital DS21140 Tulip rev 32 at Port 0xa000, 00:00:f8:05:1f:4a, IRQ 20.
[ 22.064441] tulip1: EEPROM default media type Autosense.
[ 22.128894] tulip1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
[ 22.230457] tulip1: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
[ 22.337879] tulip1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
[ 22.438465] tulip1: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
[ 22.551746] eth1: Digital DS21142/43 Tulip rev 48 at Port 0x200009400, 08:00:2b:c4:5c:d1, IRQ 44.
[ 23.256824] qla1280: QLA1040 found on PCI bus 1, dev 0
[ 23.319323] qla1280 0000:01:00.0: firmware: requesting qlogic/1040.bin
[ 23.319323] ------------[ cut here ]------------
[ 23.319323] WARNING: at /build/buildd-linux-2.6_2.6.30-2-alpha-q6OEGR/linux-2.6-2.6.30/debian/build/source_alpha_none/kernel/soft
[ 23.319323] Modules linked in: qla1280(+) tulip bitrev crc32
[ 23.319323] fffffc013b4ff9f8 0000000000000005 fffffc0001046584 fffffc013b4adcc0
[ 23.319323] 0000000000000000 fffffc013b499800 fffffc013b4adcc0 ffffffff00000010
[ 23.319323] fffffc0001221588 0000000000000001 fffffc00012366bc fffffc013b499800
[ 23.319323] fffffc013b499818 fffffc013b4adcc0 fffffc000116a6b4 fffffc013b43d030
[ 23.319323] 0000000000000007 fffffc013b4adcc0 fffffc013b43d000 fffffc013e828340
[ 23.319323] fffffc0001a1f798 fffffc0001322643 0000000000000001 0000000000000000
[ 23.319323] Trace:
[ 23.319323] [<fffffc0001046584>] _local_bh_enable_ip+0x4c/0xb8
[ 23.319323] [<fffffc0001221588>] sk_filter+0xd0/0x108
[ 23.319323] [<fffffc00012366bc>] netlink_broadcast+0x208/0x3ec
[ 23.319323] [<fffffc000116a6b4>] kobject_uevent_env+0x3a0/0x4bc
[ 23.319323] [<fffffc00011d66b8>] _request_firmware+0x468/0x57c
[ 23.319323] [<fffffc00011d66a0>] _request_firmware+0x450/0x57c
[ 23.319323] [<fffffc0001184224>] local_pci_probe+0x24/0x38
[ 23.319323] [<fffffc0001184570>] pci_device_probe+0x64/0xa0
[ 23.319323] [<fffffc00011d09bc>] driver_probe_device+0xcc/0x1e0
[ 23.319323] [<fffffc00011d0b58>] __driver_attach+0x88/0xd4
[ 23.319323] [<fffffc00011cff2c>] bus_for_each_dev+0x68/0xd0
[ 23.319323] [<fffffc00011d0ad0>] __driver_attach+0x0/0xd4
[ 23.319323] [<fffffc00011d0774>] driver_attach+0x2c/0x40
[ 23.319323] [<fffffc00011cf480>] bus_add_driver+0xd8/0x300
[ 23.319323] [<fffffc00011d1010>] driver_register+0x108/0x1d0
[ 23.319323] [<fffffc0001184aac>] __pci_register_driver+0x60/0x124
[ 23.319323] [<fffffc00010100e8>] do_one_initcall+0x74/0x1cc
[ 23.319323] [<fffffc000106ed88>] SyS_init_module+0xf0/0x2b0
[ 23.319323] [<fffffc000106ed70>] SyS_init_module+0xd8/0x2b0
[ 23.319323] [<fffffc0001010e24>] entSys+0xa4/0xc0
[ 23.319323]
[ 23.319323] ---[ end trace 9aadef308c73a9f0 ]---
[ 26.039049] sym0: <810> rev 0x2 at pci 0001:03:01.0 irq 56
[ 26.107408] sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
[ 26.176744] sym0: SCSI BUS has been reset.
[ 26.231431] scsi1 : sym-2.2.3
[ 30.645492] scsi 1:0:5:0: CD-ROM DEC RRD46 (C) DEC 0557 PQ: 0 ANSI: 2
[ 30.743148] scsi target1:0:5: Beginning Domain Validation
[ 30.810531] scsi target1:0:5: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
[ 30.895491] scsi target1:0:5: Domain Validation skipping write tests
[ 30.971663] scsi target1:0:5: Ending Domain Validation
[ 83.320269] Failed to load image "qlogic/1040.bin" err -2
[ 83.384722] scsi(0): initialize: pci probe failed!
[ 83.442340] qla1x160: Failed to initialize adapter
[ 83.499957] qla1280: QLA1040 found on PCI bus 2, dev 0
[ 83.561480] qla1280 0000:02:00.0: firmware: requesting qlogic/1040.bin
[ 107.645452] Driver 'sr' needs updating - please use bus_type methods
[ 107.727483] sr0: scsi-1 drive
[ 107.763616] Uniform CD-ROM driver Revision: 3.20
[ 108.659124] sr 1:0:5:0: Attached scsi generic sg0 type 5
[ 109.597600] scsi(2:0): Resetting SCSI BUS
[ 112.658145] scsi2 : QLogic QLA1040 PCI to SCSI Host Adapter
[ 112.658145] Firmware version: 7.65.06, Driver version 3.26
[ 112.799746] qla1280: QLA1040 found on PCI bus 4, dev 0
[ 112.805606] scsi 2:0:0:0: Direct-Access DEC RZ2DD-LS (C) DEC 0306 PQ: 0 ANSI: 2
[ 112.807559] scsi(2:0:0:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 112.809512] scsi 2:0:1:0: Direct-Access COMPAQ BD009122C6 B016 PQ: 0 ANSI: 2
[ 112.811465] scsi(2:0:1:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 112.814395] scsi 2:0:2:0: Direct-Access COMPAQ BD009122C6 B016 PQ: 0 ANSI: 2
[ 112.815371] scsi(2:0:2:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 112.823184] scsi 2:0:3:0: Direct-Access DEC RZ2DD-LS (C) DEC 0306 PQ: 0 ANSI: 2
[ 112.824160] scsi(2:0:3:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 112.830996] scsi 2:0:4:0: Direct-Access DEC RZ2DD-LS (C) DEC 0306 PQ: 0 ANSI: 2
[ 112.832950] scsi(2:0:4:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 112.840762] scsi 2:0:5:0: Direct-Access DEC RZ2DD-LS (C) DEC 0306 PQ: 0 ANSI: 2
[ 112.841739] scsi(2:0:5:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 114.005801] qla1280 0001:04:00.0: firmware: requesting qlogic/1040.bin
[ 115.141542] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 115.215761] scsi 2:0:1:0: Attached scsi generic sg2 type 0
[ 115.289980] scsi 2:0:2:0: Attached scsi generic sg3 type 0
[ 115.365175] scsi 2:0:3:0: Attached scsi generic sg4 type 0
[ 115.441347] scsi 2:0:4:0: Attached scsi generic sg5 type 0
[ 115.508729] scsi 2:0:5:0: Attached scsi generic sg6 type 0
[ 116.273377] scsi(3:0): Resetting SCSI BUS
[ 119.327087] scsi3 : QLogic QLA1040 PCI to SCSI Host Adapter
[ 119.327087] Firmware version: 7.65.06, Driver version 3.26
[ 119.469665] scsi 3:0:0:0: Direct-Access COMPAQ BD009122BA 3B07 PQ: 0 ANSI: 2
[ 119.567321] scsi(3:0:0:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 119.664977] scsi 3:0:1:0: Direct-Access COMPAQ BD009122C6 B016 PQ: 0 ANSI: 2
[ 119.763610] scsi(3:0:1:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 119.861266] scsi 3:0:2:0: Direct-Access COMPAQ BD009122C6 B016 PQ: 0 ANSI: 2
[ 119.957946] scsi(3:0:2:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 120.055602] scsi 3:0:3:0: Direct-Access COMPAQ BD009122C6 B016 PQ: 0 ANSI: 2
[ 120.154235] scsi(3:0:3:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 120.250914] scsi 3:0:4:0: Direct-Access COMPAQ BD009122C6 B016 PQ: 0 ANSI: 2
[ 120.349547] scsi(3:0:4:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 120.446227] scsi 3:0:5:0: Direct-Access COMPAQ BD009122C6 B016 PQ: 0 ANSI: 2
[ 120.545836] scsi(3:0:5:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[ 122.260679] Driver 'sd' needs updating - please use bus_type methods
[ 122.349546] sd 2:0:0:0: [sda] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 122.447202] sd 2:0:0:0: [sda] Write Protect is off
[ 122.505796] sd 2:0:3:0: [sdd] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 122.598570] sd 2:0:1:0: [sdb] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 122.691343] sd 2:0:4:0: [sde] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 122.691343] sd 2:0:2:0: [sdc] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 122.877866] sd 2:0:1:0: [sdb] Write Protect is off
[ 122.877866] sd 2:0:2:0: [sdc] Write Protect is off
[ 122.877866] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 123.095640] sd 2:0:5:0: [sdf] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 123.095640] sd 2:0:3:0: [sdd] Write Protect is off
[ 123.246030] sd 2:0:4:0: [sde] Write Protect is off
[ 123.246030] sd 3:0:0:0: Attached scsi generic sg7 type 0
[ 123.246030] sd 3:0:1:0: Attached scsi generic sg8 type 0
[ 123.246030] sd 3:0:2:0: Attached scsi generic sg9 type 0
[ 123.246030] sd 3:0:3:0: Attached scsi generic sg10 type 0
[ 123.246030] sd 3:0:4:0: Attached scsi generic sg11 type 0
[ 123.246030] sd 3:0:5:0: Attached scsi generic sg12 type 0
[ 123.246030] sd 2:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 123.791928] sd 2:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 123.897397] sd 2:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 123.897397] sd 2:0:5:0: [sdf] Write Protect is off
[ 124.057553] sda:<5>sd 3:0:0:0: [sdg] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 124.081967] sd 2:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 124.081967] sd 3:0:1:0: [sdh] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 124.082944] sd 3:0:3:0: [sdj] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 124.083920] sdd:<5>sd 3:0:1:0: [sdh] Write Protect is off
[ 124.086850] sd 3:0:3:0: [sdj] Write Protect is off
[ 124.088803] sd 3:0:1:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 124.089780] sd 3:0:3:0: [sdj] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 124.090756] sdb: sda1 sda4
[ 124.518490] sd 2:0:5:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 124.914975] sd 3:0:5:0: [sdl] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 124.914975] sdd1
[ 124.914975] sd 3:0:2:0: [sdi] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 124.914975] sd 3:0:0:0: [sdg] Write Protect is off
[ 125.123959] sd 2:0:3:0: [sdd] Attached SCSI disk
[ 125.123959] sdb1
[ 125.124935] sd 2:0:0:0: [sda] Attached SCSI disk
[ 125.154232] sd 3:0:5:0: [sdl] Write Protect is off
[ 125.156185] sd 3:0:5:0: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 125.474545] sd 3:0:4:0: [sdk] 17773524 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[ 125.475521] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 125.477474] sde:<6> sdj:<5>sd 3:0:4:0: [sdk] Write Protect is off
[ 125.482357] sdl: sde1
[ 125.724545] sdl1
[ 125.748959] sd 3:0:2:0: [sdi] Write Protect is off
[ 125.748959] sdf:<5>sd 3:0:5:0: [sdl] Attached SCSI disk
[ 125.749935] sd 2:0:4:0: [sde] Attached SCSI disk
[ 125.751888] sd 3:0:0:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 125.761654] sdf1
[ 126.049740] sd 3:0:4:0: [sdk] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 126.153255] sdg: sdj1
[ 126.182552] sdh:<6> sdc: sdh1<5>sd 3:0:2:0: [sdi] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 126.218685]
[ 126.219661] sd 3:0:3:0: [sdj] Attached SCSI disk
[ 126.382747] sdg1 sdg4
[ 126.412044] sdc1<5>sd 3:0:0:0: [sdg] Attached SCSI disk
[ 126.476497]
[ 126.494075] sd 2:0:5:0: [sdf] Attached SCSI disk
[ 126.494075] sd 2:0:2:0: [sdc] Attached SCSI disk
[ 126.494075] sd 3:0:1:0: [sdh] Attached SCSI disk
[ 126.665950] sdi:<6> sdk: sdi1
[ 126.704036] sdk1
[ 126.728450] sd 3:0:2:0: [sdi] Attached SCSI disk
[ 126.728450] sd 3:0:4:0: [sdk] Attached SCSI disk
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Loading[ 188.883692] md: raid1 personality regist
Success: loaded module raid1.
done.
Begin: Assembling all MD arrays ... [ 189.420801] md: md0 stopped.
[ 189.979394] md: bind<sdg1>
[ 190.015527] md: bind<sda1>
[ 190.532129] raid1: raid set md0 active with 2 out of 2 mirrors
[ 190.605371] md0: bitmap initialized from disk: read 1/1 pages, set 2 bits
[ 190.687402] created bitmap (3 pages) for device md0
mdadm: /dev/md0 [ 190.753808] md: md2 stopped.
has been started[ 190.805566] md0: with 2 drives. unknown partition table
[ 191.327050] md: bind<sdg4>
[ 191.364159] md: bind<sda4>
[ 191.534081] raid1: raid set md2 active with 2 out of 2 mirrors
[ 191.658104] md2: bitmap initialized from disk: read 5/5 pages, set 73 bits
[ 191.740136] created bitmap (65 pages) for device md2
mdadm: /dev/md2 [ 191.807518] md: md3 stopped.
has been started[ 191.858300] md2: with 2 drives.
unknown partition table
[ 192.539940] md: bind<sdh1>
[ 192.574120] md: bind<sdb1>
[ 192.744041] raid1: raid set md3 active with 2 out of 2 mirrors
[ 192.934471] md3: bitmap initialized from disk: read 5/5 pages, set 0 bits
[ 193.016502] created bitmap (68 pages) for device md3
mdadm: /dev/md3 has been started with 2 drives.
[ 193.340721] md: md4 stopped.
[ 193.375877] md3: unknown partition table
[ 193.768455] md: bind<sdi1>
[ 193.803611] md: bind<sdc1>
[ 193.975486] raid1: raid set md4 active with 2 out of 2 mirrors
[ 194.107322] md4: bitmap initialized from disk: read 5/5 pages, set 0 bits
[ 194.188377] created bitmap (68 pages) for device md4
mdadm: /dev/md4 has been started with 2 drives.
[ 194.454002] md: md5 stopped.
[ 194.491111] md4: unknown partition table
[ 195.184470] md: bind<sdj1>
[ 195.223532] md: bind<sdd1>
[ 195.392478] raid1: raid set md5 active with 2 out of 2 mirrors
[ 195.517478] md5: bitmap initialized from disk: read 5/5 pages, set 0 bits
[ 195.599509] created bitmap (68 pages) for device md5
mdadm: /dev/md5 [ 195.668845] md: md6 stopped.
has been started[ 195.719626] md5: with 2 drives.
unknown partition table
[ 196.072165] md: bind<sdk1>
[ 196.111227] md: bind<sde1>
[ 196.461813] raid1: raid set md6 active with 2 out of 2 mirrors
[ 196.586813] md6: bitmap initialized from disk: read 5/5 pages, set 0 bits
[ 196.668844] created bitmap (68 pages) for device md6
mdadm: /dev/md6 [ 196.738180] md: md7 stopped.
has been started[ 196.789938] md6: with 2 drives.
unknown partition table
[ 197.188375] md: bind<sdl1>
[ 197.224508] md: bind<sdf1>
[ 197.520406] raid1: raid set md7 active with 2 out of 2 mirrors
[ 197.651265] md7: bitmap initialized from disk: read 5/5 pages, set 0 bits
[ 197.733297] created bitmap (68 pages) for device md7
mdadm: /dev/md7 [ 197.799703] md7:has been started with 2 drives. unknown partition table
Success: assembled all arrays.
done.
Begin: Waiting for udev to process events ... done.
[ 206.509659] device-mapper: uevent: version 1.0.3
[ 206.576066] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
5 logical volume(s) in volume group "vg00" now active
done.
Begin: Running /scripts/local-premount ... done.
[ 218.345591] kjournald starting. Commit interval 5 seconds
[ 218.345591] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Setting hostname to 'hamster'...done.
Starting the hotplug events dispatcher: udevd[ 221.777230] udevd version 125 started
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 307.847498] input: PC Speaker as /devices/platform/pcspkr/input/input0
done.
Setting the system clock.
System Clock set to: Fri Jul 31 14:44:56 UTC 2009.
Activating swap:swapon on /dev/mapper/vg00-swapvol
[ 401.792763] Adding 524272k swap on /dev/mapper/vg00-swapvol. Priority:-1 extents:1 across:524272k
.
Will now check root file system:fsck 1.41.3 (12-Oct-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/vg00/rootvol
/dev/vg00/rootvol: clean, 12252/32768 files, 107339/131072 blocks
.
[ 402.332801] EXT3 FS on dm-4, internal journal
Setting the system clock.
System Clock set to: Fri Jul 31 14:44:58 UTC 2009.
Cleaning up ifupdown....
Regulating system clock...adjtimex: Invalid argument
for this kernel:
USER_HZ = 1024 (nominally 1024 ticks per second)
878 <= tick <= 1074
-32768000 <= frequency <= 32768000
done.
Loading kernel module tcp_diag.
Loading device-mapper support.
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups Reading all physical volumes. This may take a while...
Found volume group "vg01" using metadata type lvm2
Found volume group "vg00" using metadata type lvm2
6 logical volume(s) in volume group "vg01" now active
5 logical volume(s) in volume group "vg00" now active
.
Will now check all file systems.
fsck 1.41.3 (12-Oct-2008)
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a -C0 /dev/vg00/varvol
var: clean, 99490/196608 files, 324377/393216 blocks
[/sbin/fsck.ext3 (1) -- /usr] fsck.ext3 -a -C0 /dev/vg00/usrvol
usr: clean, 49118/262144 files, 268952/524288 blocks
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a -C0 /dev/md0
/dev/md0: clean, 29/86400 files, 67834/362816 blocks
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a -C0 /dev/vg01/homevol
home: clean, 9022/2490368 files, 4154258/4966400 blocks
[/sbin/fsck.ext3 (1) -- /export/decpatch] fsck.ext3 -a -C0 /dev/vg01/decvol
decpatch: clean, 2996/1507328 files, 2500601/3000320 blocks
[/sbin/fsck.ext3 (1) -- /var/lib/bacula] fsck.ext3 -a -C0 /dev/vg01/bdbvol
/dev/vg01/bdbvol: clean, 33/61440 files, 13980/245760 blocks
[/sbin/fsck.ext3 (1) -- /var/lib/postgresql] fsck.ext3 -a -C0 /dev/vg01/pgdbvol
/dev/vg01/pgdbvol: clean, 683/757248 files, 1005840/1566720 blocks
[/sbin/fsck.ext3 (1) -- /var/lib/postgresql/8.1/main/pg_xlog] fsck.ext3 -a -C0 /dev/vg00/pglgvol
/dev/vg00/pglgvol: clean, 20/131072 files, 158668/524288 blocks
[/sbin/fsck.ext4 (1) -- /var/spool/backup] fsck.ext4 -a -C0 /dev/vg01/spoolvol
/dev/vg01/spoolvol: clean, 11/327680 files, 55902/1310720 blocks
[/sbin/fsck.ext3 (1) -- /export/hummingbird11] fsck.ext3 -a -C0 /dev/vg01/h11vol
/dev/vg01/h11vol: clean, 5815/66560 files, 87091/133120 blocks
Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
Setting kernel variables (/etc/sysctl.conf)...done.
Will now mount local filesystems:[ 414.812287] kjournald starting. Commit interval 5 seconds
[ 414.850373] EXT3 FS on md0, internal journal
[ 414.850373] EXT3-fs: mounted filesystem with ordered data mode.
[ 415.036896] kjournald starting. Commit interval 5 seconds
[ 415.112092] EXT3 FS on dm-1, internal journal
[ 415.164826] EXT3-fs: mounted filesystem with ordered data mode.
[ 415.270295] kjournald starting. Commit interval 5 seconds
[ 415.300568] EXT3 FS on dm-0, internal journal
[ 415.300568] EXT3-fs: mounted filesystem with ordered data mode.
[ 415.561310] kjournald starting. Commit interval 5 seconds
[ 415.613068] EXT3 FS on dm-5, internal journal
[ 415.613068] EXT3-fs: mounted filesystem with ordered data mode.
[ 415.885529] kjournald starting. Commit interval 5 seconds
[ 415.919708] EXT3 FS on dm-7, internal journal
[ 415.920685] EXT3-fs: mounted filesystem with ordered data mode.
[ 416.231232] kjournald starting. Commit interval 5 seconds
[ 416.281036] EXT3 FS on dm-8, internal journal
[ 416.281036] EXT3-fs: mounted filesystem with ordered data mode.
[ 416.449982] kjournald starting. Commit interval 5 seconds
[ 416.551544] EXT3 FS on dm-9, internal journal
[ 416.604278] EXT3-fs: mounted filesystem with ordered data mode.
[ 416.735138] kjournald starting. Commit interval 5 seconds
[ 416.782989] EXT3 FS on dm-3, internal journal
[ 416.782989] EXT3-fs: mounted filesystem with ordered data mode.
[ 417.241973] EXT4-fs: barriers enabled
[ 417.297637] kjournald2 starting: pid 2704, dev dm-6:8, commit interval 5 seconds
[ 417.346466] EXT4 FS on dm-6, internal journal on dm-6:8
[ 417.346466] EXT4-fs: delayed allocation enabled
[ 417.346466] EXT4-fs: file extents enabled
[ 417.349395] EXT4-fs: mballoc enabled
[ 417.349395] EXT4-fs: mounted filesystem dm-6 with ordered data mode
[ 417.697051] kjournald starting. Commit interval 5 seconds
[ 417.740020] EXT3 FS on dm-10, internal journal
[ 417.740020] EXT3-fs: mounted filesystem with ordered data mode.
.
Will now activate swapfile swap:done.
Checking quotas...done.
Turning on quotas...done.
Cleaning /tmp...done.
Cleaning /var/run...done.
Cleaning /var/lock...done.
Checking minimum space in /tmp...done.
Setting up resolvconf...done.
Setting up networking....
Configuring network interfaces...[ 440.523211] eth0: Setting half-duplex based on MII#5 link partner capability of 0000.
done.
Starting portmap daemon....
Starting NFS common utilities: statd[ 455.953868] RPC: Registered udp transport module.
[ 456.010508] RPC: Registered tcp transport module.
[ 456.229258] Slow work thread pool: Starting up
[ 456.282969] Slow work thread pool: Ready
[ 456.330821] FS-Cache: Loaded
[ 456.577891] FS-Cache: Netfs 'nfs' registered for caching
[ 456.803477] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
idmapd.
Loading the saved-state of the serial devices...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Setting console screen modes and fonts.
Initializing random number generator...done.
Recovering nvi editor sessions...done.
Setting up X server socket directory /tmp/.X11-unix....
Setting up ICE socket directory /tmp/.ICE-unix....
INIT: Entering runlevel: 2
Starting system log daemon....
Starting kernel log daemon....
Starting system message bus: dbus.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting domain name service...: bind9.
Starting domain name service: lwresd.
Starting OpenBSD Secure Shell server: sshd.
Starting portmap daemon...Already running..
Starting atop system monitor: atop.
Starting ClamAV daemon: clamd LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
.
Starting ClamAV virus database updater: freshclam.
Starting Common Unix Printing System: cupsd[ 484.426509] parport0: PC-style at 0x3bc [PCSPP]
[ 484.577876] lp0: using parport0 (polling).
[ 484.847408] ppdev: user-space parallel port driver
.
Starting file alteration monitor: FAM.
Starting SMP IRQ Balancer: irqbalance.
Starting kerneloops:
Starting Mailman master qrunner: mailmanctl.
Starting NFS common utilities: statd idmapd.
Exporting directories for NFS kernel daemon...exportfs: Warning: /usr/local/src does not exist
.
Starting NFS kernel daemon: nfsd[ 499.949939] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 500.154040] NFSD: starting 90-second grace period
mountd.
Starting internet superserver: inetd.
Starting PostgreSQL 8.1 database server: main.
Starting rsync daemon: rsync.
Starting Samba daemons: nmbd smbd.
To enable saslauthd, edit /etc/default/saslauthd and set START=yes (warning).
Starting network management services: snmpd.
Starting the system activity data collector: sadc.
tftpd-hpa disabled in /etc/default/tftpd-hpa
Starting the Winbind daemon: winbind.
Starting quota service: rpc.rquotad.
Starting Mail Transport Agent (MTA): sendmail.
Starting NTP server: ntpd.
Starting MD monitoring service: mdadm --monitor.
Starting DHCP server: dhcpd3[ 531.177462] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
Running local boot scripts (/etc/rc.local)\nEnabling tape hardware compression
/dev/nst0: No such file or directory
failed!
Starting Bacula Storage daemon: /dev/nst0: No such file or directory
Starting apache 1.3 web server....
Starting Bacula File daemon: bacula-fd.
Starting Bacula Director: bacula-dir.
Edit /etc/default/jackd to start jackd
Debian GNU/Linux 5.0 hamster ttyS0
hamster login:
--- End Message ---
--- Begin Message ---
- To: 543244-close@bugs.debian.org
- Subject: Bug#543244: fixed in linux-2.6 2.6.31-1~experimental.1
- From: maximilian attems <maks@debian.org>
- Date: Mon, 05 Oct 2009 17:43:36 +0000
- Message-id: <E1Muray-0006n7-RP@ries.debian.org>
Source: linux-2.6
Source-Version: 2.6.31-1~experimental.1
We believe that the bug you reported is fixed in the latest version of
linux-2.6, which is due to be installed in the Debian FTP archive:
firmware-linux-free_2.6.31-1~experimental.1_all.deb
to pool/main/l/linux-2.6/firmware-linux-free_2.6.31-1~experimental.1_all.deb
linux-2.6_2.6.31-1~experimental.1.diff.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.31-1~experimental.1.diff.gz
linux-2.6_2.6.31-1~experimental.1.dsc
to pool/main/l/linux-2.6/linux-2.6_2.6.31-1~experimental.1.dsc
linux-2.6_2.6.31.orig.tar.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.31.orig.tar.gz
linux-doc-2.6.31_2.6.31-1~experimental.1_all.deb
to pool/main/l/linux-2.6/linux-doc-2.6.31_2.6.31-1~experimental.1_all.deb
linux-headers-2.6.31-trunk-all-amd64_2.6.31-1~experimental.1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.31-trunk-all-amd64_2.6.31-1~experimental.1_amd64.deb
linux-headers-2.6.31-trunk-all_2.6.31-1~experimental.1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.31-trunk-all_2.6.31-1~experimental.1_amd64.deb
linux-headers-2.6.31-trunk-amd64_2.6.31-1~experimental.1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.31-trunk-amd64_2.6.31-1~experimental.1_amd64.deb
linux-headers-2.6.31-trunk-common_2.6.31-1~experimental.1_amd64.deb
to pool/main/l/linux-2.6/linux-headers-2.6.31-trunk-common_2.6.31-1~experimental.1_amd64.deb
linux-image-2.6.31-trunk-amd64_2.6.31-1~experimental.1_amd64.deb
to pool/main/l/linux-2.6/linux-image-2.6.31-trunk-amd64_2.6.31-1~experimental.1_amd64.deb
linux-libc-dev_2.6.31-1~experimental.1_amd64.deb
to pool/main/l/linux-2.6/linux-libc-dev_2.6.31-1~experimental.1_amd64.deb
linux-manual-2.6.31_2.6.31-1~experimental.1_all.deb
to pool/main/l/linux-2.6/linux-manual-2.6.31_2.6.31-1~experimental.1_all.deb
linux-patch-debian-2.6.31_2.6.31-1~experimental.1_all.deb
to pool/main/l/linux-2.6/linux-patch-debian-2.6.31_2.6.31-1~experimental.1_all.deb
linux-source-2.6.31_2.6.31-1~experimental.1_all.deb
to pool/main/l/linux-2.6/linux-source-2.6.31_2.6.31-1~experimental.1_all.deb
linux-support-2.6.31-trunk_2.6.31-1~experimental.1_all.deb
to pool/main/l/linux-2.6/linux-support-2.6.31-trunk_2.6.31-1~experimental.1_all.deb
linux-tree-2.6.31_2.6.31-1~experimental.1_all.deb
to pool/main/l/linux-2.6/linux-tree-2.6.31_2.6.31-1~experimental.1_all.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 543244@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
maximilian attems <maks@debian.org> (supplier of updated linux-2.6 package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Sun, 04 Oct 2009 20:27:05 +0200
Source: linux-2.6
Binary: linux-source-2.6.31 linux-doc-2.6.31 linux-manual-2.6.31 linux-patch-debian-2.6.31 firmware-linux-free linux-tree-2.6.31 linux-support-2.6.31-trunk linux-libc-dev linux-headers-2.6.31-trunk-all linux-headers-2.6.31-trunk-all-alpha linux-headers-2.6.31-trunk-common linux-image-2.6.31-trunk-alpha-generic linux-headers-2.6.31-trunk-alpha-generic linux-image-2.6.31-trunk-alpha-smp linux-headers-2.6.31-trunk-alpha-smp linux-image-2.6.31-trunk-alpha-legacy linux-headers-2.6.31-trunk-alpha-legacy linux-headers-2.6.31-trunk-all-amd64 linux-image-2.6.31-trunk-amd64 linux-headers-2.6.31-trunk-amd64 linux-headers-2.6.31-trunk-all-armel linux-image-2.6.31-trunk-iop32x linux-headers-2.6.31-trunk-iop32x linux-image-2.6.31-trunk-ixp4xx linux-headers-2.6.31-trunk-ixp4xx linux-image-2.6.31-trunk-kirkwood linux-headers-2.6.31-trunk-kirkwood linux-image-2.6.31-trunk-orion5x linux-headers-2.6.31-trunk-orion5x linux-image-2.6.31-trunk-versatile linux-headers-2.6.31-trunk-versatile linux-h
eaders-2.6.31-trunk-all-hppa linux-image-2.6.31-trunk-parisc linux-headers-2.6.31-trunk-parisc linux-image-2.6.31-trunk-parisc-smp linux-headers-2.6.31-trunk-parisc-smp linux-image-2.6.31-trunk-parisc64 linux-headers-2.6.31-trunk-parisc64 linux-image-2.6.31-trunk-parisc64-smp linux-headers-2.6.31-trunk-parisc64-smp linux-headers-2.6.31-trunk-all-i386 linux-image-2.6.31-trunk-486 linux-headers-2.6.31-trunk-486 linux-image-2.6.31-trunk-686 linux-headers-2.6.31-trunk-686 linux-image-2.6.31-trunk-686-bigmem linux-headers-2.6.31-trunk-686-bigmem linux-headers-2.6.31-trunk-all-ia64 linux-image-2.6.31-trunk-itanium linux-headers-2.6.31-trunk-itanium linux-image-2.6.31-trunk-mckinley linux-headers-2.6.31-trunk-mckinley linux-headers-2.6.31-trunk-all-m68k linux-image-2.6.31-trunk-amiga linux-headers-2.6.31-trunk-amiga linux-image-2.6.31-trunk-atari linux-headers-2.6.31-trunk-atari linux-image-2.6.31-trunk-bvme6000 linux-headers-2.6.31-trunk-bvme6000 linux-image-2.6.31-trunk-mac linux
-headers-2.6.31-trunk-mac linux-image-2.6.31-trunk-mvme147 linux-headers-2.6.31-trunk-mvme147 linux-image-2.6.31-trunk-mvme16x linux-headers-2.6.31-trunk-mvme16x linux-headers-2.6.31-trunk-all-mips linux-image-2.6.31-trunk-r4k-ip22 linux-headers-2.6.31-trunk-r4k-ip22 linux-image-2.6.31-trunk-r5k-ip32 linux-headers-2.6.31-trunk-r5k-ip32 linux-image-2.6.31-trunk-sb1-bcm91250a linux-headers-2.6.31-trunk-sb1-bcm91250a linux-image-2.6.31-trunk-sb1a-bcm91480b linux-headers-2.6.31-trunk-sb1a-bcm91480b linux-image-2.6.31-trunk-4kc-malta linux-headers-2.6.31-trunk-4kc-malta linux-image-2.6.31-trunk-5kc-malta linux-headers-2.6.31-trunk-5kc-malta linux-headers-2.6.31-trunk-all-mipsel linux-image-2.6.31-trunk-r5k-cobalt linux-headers-2.6.31-trunk-r5k-cobalt linux-headers-2.6.31-trunk-all-powerpc linux-image-2.6.31-trunk-powerpc linux-headers-2.6.31-trunk-powerpc linux-image-2.6.31-trunk-powerpc-smp linux-headers-2.6.31-trunk-powerpc-smp linux-image-2.6.31-trunk-powerpc64 linux-headers-2
.6.31-trunk-powerpc64 linux-headers-2.6.31-trunk-all-s390 linux-image-2.6.31-trunk-s390x linux-headers-2.6.31-trunk-s390x linux-image-2.6.31-trunk-s390x-tape linux-headers-2.6.31-trunk-all-sparc linux-image-2.6.31-trunk-sparc64 linux-headers-2.6.31-trunk-sparc64 linux-image-2.6.31-trunk-sparc64-smp linux-headers-2.6.31-trunk-sparc64-smp
Architecture: source all amd64
Version: 2.6.31-1~experimental.1
Distribution: experimental
Urgency: low
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: maximilian attems <maks@debian.org>
Description:
firmware-linux-free - Binary firmware for various drivers in the Linux kernel
linux-doc-2.6.31 - Linux kernel specific documentation for version 2.6.31
linux-headers-2.6.31-trunk-486 - Header files for Linux 2.6.31-trunk-486
linux-headers-2.6.31-trunk-4kc-malta - Header files for Linux 2.6.31-trunk-4kc-malta
linux-headers-2.6.31-trunk-5kc-malta - Header files for Linux 2.6.31-trunk-5kc-malta
linux-headers-2.6.31-trunk-686 - Header files for Linux 2.6.31-trunk-686
linux-headers-2.6.31-trunk-686-bigmem - Header files for Linux 2.6.31-trunk-686-bigmem
linux-headers-2.6.31-trunk-all - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-alpha - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-amd64 - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-armel - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-hppa - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-i386 - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-ia64 - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-m68k - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-mips - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-mipsel - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-powerpc - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-s390 - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-all-sparc - All header files for Linux 2.6.31
linux-headers-2.6.31-trunk-alpha-generic - Header files for Linux 2.6.31-trunk-alpha-generic
linux-headers-2.6.31-trunk-alpha-legacy - Header files for Linux 2.6.31-trunk-alpha-legacy
linux-headers-2.6.31-trunk-alpha-smp - Header files for Linux 2.6.31-trunk-alpha-smp
linux-headers-2.6.31-trunk-amd64 - Header files for Linux 2.6.31-trunk-amd64
linux-headers-2.6.31-trunk-amiga - Header files for Linux 2.6.31-trunk-amiga
linux-headers-2.6.31-trunk-atari - Header files for Linux 2.6.31-trunk-atari
linux-headers-2.6.31-trunk-bvme6000 - Header files for Linux 2.6.31-trunk-bvme6000
linux-headers-2.6.31-trunk-common - Common header files for Linux 2.6.31-trunk
linux-headers-2.6.31-trunk-iop32x - Header files for Linux 2.6.31-trunk-iop32x
linux-headers-2.6.31-trunk-itanium - Header files for Linux 2.6.31-trunk-itanium
linux-headers-2.6.31-trunk-ixp4xx - Header files for Linux 2.6.31-trunk-ixp4xx
linux-headers-2.6.31-trunk-kirkwood - Header files for Linux 2.6.31-trunk-kirkwood
linux-headers-2.6.31-trunk-mac - Header files for Linux 2.6.31-trunk-mac
linux-headers-2.6.31-trunk-mckinley - Header files for Linux 2.6.31-trunk-mckinley
linux-headers-2.6.31-trunk-mvme147 - Header files for Linux 2.6.31-trunk-mvme147
linux-headers-2.6.31-trunk-mvme16x - Header files for Linux 2.6.31-trunk-mvme16x
linux-headers-2.6.31-trunk-orion5x - Header files for Linux 2.6.31-trunk-orion5x
linux-headers-2.6.31-trunk-parisc - Header files for Linux 2.6.31-trunk-parisc
linux-headers-2.6.31-trunk-parisc-smp - Header files for Linux 2.6.31-trunk-parisc-smp
linux-headers-2.6.31-trunk-parisc64 - Header files for Linux 2.6.31-trunk-parisc64
linux-headers-2.6.31-trunk-parisc64-smp - Header files for Linux 2.6.31-trunk-parisc64-smp
linux-headers-2.6.31-trunk-powerpc - Header files for Linux 2.6.31-trunk-powerpc
linux-headers-2.6.31-trunk-powerpc-smp - Header files for Linux 2.6.31-trunk-powerpc-smp
linux-headers-2.6.31-trunk-powerpc64 - Header files for Linux 2.6.31-trunk-powerpc64
linux-headers-2.6.31-trunk-r4k-ip22 - Header files for Linux 2.6.31-trunk-r4k-ip22
linux-headers-2.6.31-trunk-r5k-cobalt - Header files for Linux 2.6.31-trunk-r5k-cobalt
linux-headers-2.6.31-trunk-r5k-ip32 - Header files for Linux 2.6.31-trunk-r5k-ip32
linux-headers-2.6.31-trunk-s390x - Header files for Linux 2.6.31-trunk-s390x
linux-headers-2.6.31-trunk-sb1-bcm91250a - Header files for Linux 2.6.31-trunk-sb1-bcm91250a
linux-headers-2.6.31-trunk-sb1a-bcm91480b - Header files for Linux 2.6.31-trunk-sb1a-bcm91480b
linux-headers-2.6.31-trunk-sparc64 - Header files for Linux 2.6.31-trunk-sparc64
linux-headers-2.6.31-trunk-sparc64-smp - Header files for Linux 2.6.31-trunk-sparc64-smp
linux-headers-2.6.31-trunk-versatile - Header files for Linux 2.6.31-trunk-versatile
linux-image-2.6.31-trunk-486 - Linux 2.6.31 image on x86
linux-image-2.6.31-trunk-4kc-malta - Linux 2.6.31 image on MIPS Malta
linux-image-2.6.31-trunk-5kc-malta - Linux 2.6.31 image on MIPS Malta (64-bit)
linux-image-2.6.31-trunk-686 - Linux 2.6.31 image on PPro/Celeron/PII/PIII/P4
linux-image-2.6.31-trunk-686-bigmem - Linux 2.6.31 image on PPro/Celeron/PII/PIII/P4
linux-image-2.6.31-trunk-alpha-generic - Linux 2.6.31 image on Alpha
linux-image-2.6.31-trunk-alpha-legacy - Linux 2.6.31 image on Alpha Legacy
linux-image-2.6.31-trunk-alpha-smp - Linux 2.6.31 image on Alpha SMP
linux-image-2.6.31-trunk-amd64 - Linux 2.6.31 image on AMD64
linux-image-2.6.31-trunk-amiga - Linux 2.6.31 image on Amiga
linux-image-2.6.31-trunk-atari - Linux 2.6.31 image on Atari
linux-image-2.6.31-trunk-bvme6000 - Linux 2.6.31 image on BVM BVME4000 and BVME6000
linux-image-2.6.31-trunk-iop32x - Linux 2.6.31 image on IOP32x
linux-image-2.6.31-trunk-itanium - Linux 2.6.31 image on Itanium
linux-image-2.6.31-trunk-ixp4xx - Linux 2.6.31 image on IXP4xx
linux-image-2.6.31-trunk-kirkwood - Linux 2.6.31 image on Marvell Kirkwood
linux-image-2.6.31-trunk-mac - Linux 2.6.31 image on Macintosh
linux-image-2.6.31-trunk-mckinley - Linux 2.6.31 image on Itanium II
linux-image-2.6.31-trunk-mvme147 - Linux 2.6.31 image on Motorola MVME147
linux-image-2.6.31-trunk-mvme16x - Linux 2.6.31 image on Motorola MVME162/6/7, MVME172/7
linux-image-2.6.31-trunk-orion5x - Linux 2.6.31 image on Marvell Orion
linux-image-2.6.31-trunk-parisc - Linux 2.6.31 image on 32-bit PA-RISC
linux-image-2.6.31-trunk-parisc-smp - Linux 2.6.31 image on multiprocessor 32-bit PA-RISC
linux-image-2.6.31-trunk-parisc64 - Linux 2.6.31 image on 64-bit PA-RISC
linux-image-2.6.31-trunk-parisc64-smp - Linux 2.6.31 image on multiprocessor 64-bit PA-RISC
linux-image-2.6.31-trunk-powerpc - Linux 2.6.31 image on uniprocessor 32-bit PowerPC
linux-image-2.6.31-trunk-powerpc-smp - Linux 2.6.31 image on multiprocessor 32-bit PowerPC
linux-image-2.6.31-trunk-powerpc64 - Linux 2.6.31 image on 64-bit PowerPC
linux-image-2.6.31-trunk-r4k-ip22 - Linux 2.6.31 image on SGI IP22
linux-image-2.6.31-trunk-r5k-cobalt - Linux 2.6.31 image on Cobalt
linux-image-2.6.31-trunk-r5k-ip32 - Linux 2.6.31 image on SGI IP32
linux-image-2.6.31-trunk-s390x - Linux 2.6.31 image on IBM zSeries
linux-image-2.6.31-trunk-s390x-tape - Linux 2.6.31 image on IBM zSeries, IPL from tape
linux-image-2.6.31-trunk-sb1-bcm91250a - Linux 2.6.31 image on BCM91250A
linux-image-2.6.31-trunk-sb1a-bcm91480b - Linux 2.6.31 image on BCM91480B
linux-image-2.6.31-trunk-sparc64 - Linux 2.6.31 image on uniprocessor 64-bit UltraSPARC
linux-image-2.6.31-trunk-sparc64-smp - Linux 2.6.31 image on multiprocessor 64-bit UltraSPARC
linux-image-2.6.31-trunk-versatile - Linux 2.6.31 image on Versatile
linux-libc-dev - Linux support headers for userspace development
linux-manual-2.6.31 - Linux kernel API manual pages for version 2.6.31
linux-patch-debian-2.6.31 - Debian patches to version 2.6.31 of the Linux kernel
linux-source-2.6.31 - Linux kernel source for version 2.6.31 with Debian patches
linux-support-2.6.31-trunk - Support files for Linux 2.6.31
linux-tree-2.6.31 - Linux kernel source tree for building Debian kernel images
Closes: 278729 400825 464197 471495 494119 497230 507557 510279 515982 518710 522358 524142 525625 525958 527517 528694 530620 533357 535646 536333 536455 538159 538410 539176 539215 539369 539378 540486 541307 541630 541702 542470 542551 543244 545229 545377 545981 546041
Changes:
linux-2.6 (2.6.31-1~experimental.1) experimental; urgency=low
.
* New upstream release.
- Support for W83627DHG-P (closes: #535646).
- Restore MAC address and MTU change operations on Orinoco and others
(Closes: #536455)
- Remove incorrect ACPI blacklisting of ASUS P4B266 mainboards
(Closes: #525625)
- atl1c fixes for Eee PC model 1005HA-H. (closes: #538410)
- parisc64-smp boot fix on J5600. (closes: #539369)
- parisc: Fix GOT overflow during module load on 64bit kernel
(closes: #539378)
- xfs: fix freeing of inodes not yet added to the inode cache
(Closes: #527517)
- IPv6: add "disable" module parameter support to ipv6.ko.
(closes: #542470)
- IPv6: avoid wraparound for expired preferred lifetime
(Closes: #518710)
- Fixes lockups with older dual-CPU machines (Closes: #542551)
- x86, pat: Allow ISA memory range uncacheable mapping requests
(Closes: #538159)
- drm/i915: Hook connector to encoder during load detection
(Closes: #522358)
- module: workaround duplicate section names (Closes: #545229)
- b43: Add fw capabilities (Closes: #533357)
- procfs: Fix idle time in uptime (Closes: #545981)
- e1000, e1000e, igb, ixgb, ixgbe: Fix initial link state
(Closes: #546041)
- CIFS: Handle port= mount option correctly (Closes: #524142)
- i915: Prevent screen flickering in X11 (Closes: #545377)
- hppa: Ensure broadcast tlb purge runs single threaded
(Closes: #539215)
.
[ maximilian attems ]
* [powerpc64] Enable modular RTC_DRV_PS3, PS3_VRAM.
(Closes: #528694)
* Set new NETFILTER_XT_MATCH_OSF, FIREWIRE_NET, SND_CTXFI, USB_XHCI_HCD,
IEEE802154, CAN_DEV, EEPROM_MAX6875, DM_LOG_USERSPACE, DM_MULTIPATH_QL,
DM_MULTIPATH_ST, LIBERTAS_SPI, CAN_SJA1000, CAN_SJA1000_PLATFORM,
CAN_EMS_PCI, CAN_KVASER_PCI, CB710_CORE, CNIC, RT2800USB,
USB_NET_INT51X1, SND_LX6464ES, BLK_DEV_OSD, SCSI_BNX2_ISCSI, IWM,
IEEE802154_DRIVERS, TOUCHSCREEN_EETI, TOUCHSCREEN_W90X900,
BATTERY_MAX17040, SENSORS_TMP401, REGULATOR_USERSPACE_CONSUMER,
REGULATOR_MAX1586, REGULATOR_LP3971, MEDIA_SUPPORT, CUSE,
WL12XX, PPS, AB3100_CORE, SND_HDA_INPUT_JACK,MMC_SDHCI_PLTFM,
MMC_CB710, MMC_VIA_SDMMC, LEDS_LP3944, RTC_DRV_RX8025,
SMARTJOYPLUS_FF, USB_CDC_PHONET, USB_GSPCA_SN9C20X, MOUSE_SYNAPTICS_I2C,
PCIEAER_INJECT.
* Disable v4l1 ov511 and quickcam_messenger drivers.
* [x86_64] Enable HW_RANDOM_VIA.
* [x86] Keep divers staging stuff enabled.
* [x86] Enable RT3070, COMEDI_PCMCIA_DRIVERS, ACERHDF, EDAC_AMD64,
XEN_DEV_EVTCHN, XEN_SYS_HYPERVISOR, PERF_COUNTERS,
CC_STACKPROTECTOR, DEFAULT_MMAP_MIN_ADDR=65536.
* rtl8192su: remove firmware and disable.
* Newer Standards-Version 3.8.2 without changes.
* Allow install in chroot without do_initrd check for piuparts.
* Cleanup Maintainer scripts from ancient pre linux-2.6 assumptions.
(Also closes: #536333)
* Disable DEVKMEM.
* [ppc, sparc] Enable EFI_PARTITION. (closes: #540486)
* Disable old USB_DEVICE_CLASS. (Closes: #510279)
* Drop yaird initramfs generator support.
* Add stable release 2.6.31.1.
* Enable PREEMPT_VOLUNTARY.
.
[ Ben Hutchings ]
* mga: remove unnecessary change from firmware-loading patch
* cxgb3: remove PHY firmware and use request_firmware() to load it
* Add firmware-linux-free package containing DFSG-free firmware
* av7110: include firmware source and binary
* snd-cs46xx: reenable using external firmware (closes: #464197,
but note that Debian cannot currently distribute the firmware),
thanks to Kalle Olavi Niemitalo <kon@iki.fi>
* ib_ipath: remove firmware for QLogic IBA7220 and use
request_firmware() to load it
* dvb-usb-af9005: remove initialisation script derived from Windows
driver and use request_firmware() to extract it at run-time
(closes: #494119)
* Add warning on upgrade to a new upstream version where the system
appears to be missing necessary firmware files (closes: #541702)
* qla1280: Release spinlock when requesting firmware (closes: #543244)
* r128: Add test for initialisation to all ioctls that require it
(closes: #541630)
* rt{2860,2870,3070}sta: Use existing CCITT CRC implementation on
firmware rather than adding an equivalent variant of ITU-T CRC
* rd: Build as a module since we do not require initrd support
* x86: Fix crash in text_poke_early() on 486-class processors
(Closes: #515982)
* intel-agp: Fix cache flushing on i8xx chipsets, avoiding graphics
corruption and GPU lock-ups (Closes: #541307)
* Generate architecture-qualified package relations as needed for
flavours that exist for multiple architectures (Closes: #278729)
* Prompt bug reporters to run the kernel version they're reporting on
or otherwise record boot messages
* Include PCI device list in bug reports even if the running kernel
doesn't match
.
[ Martin Michlmayr ]
* [armel/orion5x, armel/kirkwood] Set GPIO_SYSFS=y since these
platforms have been converted to GPIOLIB.
* [armel/orion5x, armel/kirkwood] Disable MARVELL_PHY since it may
lead to conflicts with the built-in Ethernet.
* Add features from 2.6.32:
- crypto: mv_cesa - Add support for Orion5X crypto engine
* [armel/orion5x] Enable CRYPTO_DEV_MV_CESA.
* Disable SYS_HAS_EARLY_PRINTK on SGI IP22 to work around a hang
during bootup (Closes: #507557)
* [armel] Enable BPQETHER (on the request of Iain Young) and some
other AX25 drivers.
.
[ Bastian Blank ]
* Disable staging drivers by default.
* Force all bugs against images to be reported to linux-2.6.
(closes: #539176)
* [arm] Remove old arm architecture.
* Use kernel architecture for libc-dev build.
.
[ Moritz Muehlenhoff ]
* Fix Linus' name in copyright file (Closes: #530620)
* More verbose explanation on difference between Alpha flavour
(Closes: #497230)
* Add Vcs-Svn and Vcs-Browser stanzas pointing to the SVN branch
used for development in unstable. There are other branches
used for experimental (trunk), oldstable and stable, but Vcs-*
doesn't yet provide the ability to distinguish branches in a
more fine-grained manner. (Closes: #471495)
* Update Standards-Version to 3.8.3, no changes needed
* Disable PROM console support (Closes: #525958)
* Make the description of linux-support a little more verbose
(Closes: #400825)
* This upload fixes the following security issues:
- CVE-2009-3290 (2.6.31)
- CVE-2009-3288 (2.6.31.1)
- CVE-2009-3280 (2.6.31.1)
- CVE-2009-3234 (2.6.31.1)
- CVE-2009-3043 (2.6.31)
- CVE-2009-3002 (2.6.31)
- CVE-2009-3001 (2.6.31)
- CVE-2009-2844 (2.6.31)
- CVE-2009-2695 (2.6.31)
- CVE-2009-2691 (2.6.31)
.
[ dann frazier ]
* n_tty: Fix echo race
* [ia64] Stop disabling CONFIG_HOTPLUG_CPU, which was blocking
CONFIG_KEXEC from being enabled
* [hppa] Disable CONFIG_AB3100_CORE, it fails to build
Checksums-Sha1:
a62576fb625b2255377ab31f5aa440bbeaefd55c 4926 linux-2.6_2.6.31-1~experimental.1.dsc
8162b6b6d14a00a742e68480809ad4059602540a 78201361 linux-2.6_2.6.31.orig.tar.gz
0566b3d85b23fe8e6e53aaed71926235faab7b14 359181 linux-2.6_2.6.31-1~experimental.1.diff.gz
4016bb9b07d542d76a6dc4b8fb4404e3d47ad46f 5527578 linux-doc-2.6.31_2.6.31-1~experimental.1_all.deb
8ef629e7f8f4b5c7550bd3e841c7929adbd57c5d 2069102 linux-manual-2.6.31_2.6.31-1~experimental.1_all.deb
7de7e08b354541bb7c261347b6852e9da541e64b 205634 linux-patch-debian-2.6.31_2.6.31-1~experimental.1_all.deb
34cb9674caaf70f3146a07307c1fe700f8b12cf8 60645174 linux-source-2.6.31_2.6.31-1~experimental.1_all.deb
3330e9b64c8265575dbdf939b06835b85323ae53 129858 linux-support-2.6.31-trunk_2.6.31-1~experimental.1_all.deb
b2e3db0b2eb062fbc7662a7228338e24ab2c1722 114522 linux-tree-2.6.31_2.6.31-1~experimental.1_all.deb
520784598ae429403e7cfaeeeeaadb5962a332df 117434 firmware-linux-free_2.6.31-1~experimental.1_all.deb
44ff8a5b9dae94906ffa2e44738491a0cd54d00d 27147072 linux-image-2.6.31-trunk-amd64_2.6.31-1~experimental.1_amd64.deb
de5b36e99966536808c603609d86813e333c091c 439606 linux-headers-2.6.31-trunk-amd64_2.6.31-1~experimental.1_amd64.deb
ab8bbfc9ff35d508e38e905f96e3883c789a8891 3739804 linux-headers-2.6.31-trunk-common_2.6.31-1~experimental.1_amd64.deb
e3409acdfba5bccd00d77c276b670c0474b12162 114174 linux-headers-2.6.31-trunk-all_2.6.31-1~experimental.1_amd64.deb
28646a34bb0702d1ae849d7c276a8e12d56a43af 114176 linux-headers-2.6.31-trunk-all-amd64_2.6.31-1~experimental.1_amd64.deb
9f155540962cc155789651fae7aa5fb1a19338c3 869558 linux-libc-dev_2.6.31-1~experimental.1_amd64.deb
Checksums-Sha256:
9d56404c5a8746f96b8aaeb18c84876580e4f414f1b6bf880bf8f87932c6e89f 4926 linux-2.6_2.6.31-1~experimental.1.dsc
334f348894f8c55d6337418a6894e1bbc13bb06ed7b02ab4ec7b47de6249f390 78201361 linux-2.6_2.6.31.orig.tar.gz
f0a642cd6f97b46538d86235f3d821a1b337a66a4a1dca143420e5aa79cbda01 359181 linux-2.6_2.6.31-1~experimental.1.diff.gz
1f667a83a122c43419a19d43a9b4fd824009938a57b204999cd8a5caa4b4b963 5527578 linux-doc-2.6.31_2.6.31-1~experimental.1_all.deb
dd96101f656857d0fcfc058cdc33eb533d41323ecca77bc2c1ee8c9d2c0012f1 2069102 linux-manual-2.6.31_2.6.31-1~experimental.1_all.deb
abe4a34454ceaaf1e91498577aacf5f9210e773f35622d8b637914a49250bbd1 205634 linux-patch-debian-2.6.31_2.6.31-1~experimental.1_all.deb
1a1af10bac4b422beb24fdf3383bb8a9c7c32f38ef6a989ea192e4769c6c75cf 60645174 linux-source-2.6.31_2.6.31-1~experimental.1_all.deb
8a1f28bd9f827adc4306af776e31df83555a467178b53519501dffc7acbc1206 129858 linux-support-2.6.31-trunk_2.6.31-1~experimental.1_all.deb
b250ba7c2c478658397557e2099355329128a629e51a2e702839a2f9eb9ab518 114522 linux-tree-2.6.31_2.6.31-1~experimental.1_all.deb
d714a832abe2e987f904e6064a7687f894ffbc5a2f6229c2dca2dbf6473cc51c 117434 firmware-linux-free_2.6.31-1~experimental.1_all.deb
0f1b9e640ba628bfded635186d7d6a624455cd3e023f3e075db99fbd2ad86671 27147072 linux-image-2.6.31-trunk-amd64_2.6.31-1~experimental.1_amd64.deb
f6d4ad5cc0542280a3c55917c01af02d425c3b014d21836b2b0aaa808a2e8a4d 439606 linux-headers-2.6.31-trunk-amd64_2.6.31-1~experimental.1_amd64.deb
bdb0dc2100547c8f335921c8e05b6ea245243671061674e20352e91dbb2116d0 3739804 linux-headers-2.6.31-trunk-common_2.6.31-1~experimental.1_amd64.deb
d53ba0a06a232e2dd7594188a2aa7727b8c15f62c3c497fbf29a7b8a865becea 114174 linux-headers-2.6.31-trunk-all_2.6.31-1~experimental.1_amd64.deb
c747a3888b36fed1fdf551ad5bf35670b334d1af100e2a47508b4dc86d4190d4 114176 linux-headers-2.6.31-trunk-all-amd64_2.6.31-1~experimental.1_amd64.deb
5c698722ee90a95d2315e3cde6c9731998c3c129ceeb3ceba3fe5066f27ca6fa 869558 linux-libc-dev_2.6.31-1~experimental.1_amd64.deb
Files:
6685669a5b9d6bd0f0ba8c1d3af68de0 4926 kernel optional linux-2.6_2.6.31-1~experimental.1.dsc
5afda6957e06654a981df24cee38d802 78201361 kernel optional linux-2.6_2.6.31.orig.tar.gz
1bf7384d84204ef2edee9f2ac5a3c0a6 359181 kernel optional linux-2.6_2.6.31-1~experimental.1.diff.gz
f0d2def4ae700ca2d0105658c18fbffa 5527578 doc optional linux-doc-2.6.31_2.6.31-1~experimental.1_all.deb
61da3d4d61654fd01d4969014c8d70e0 2069102 doc optional linux-manual-2.6.31_2.6.31-1~experimental.1_all.deb
84bd11ed7d53670a7988d817e1ca0916 205634 kernel optional linux-patch-debian-2.6.31_2.6.31-1~experimental.1_all.deb
2fb0a90d947e086eb61d8480ea097b19 60645174 kernel optional linux-source-2.6.31_2.6.31-1~experimental.1_all.deb
c762c78004467d443297ef23d96b5ba1 129858 devel optional linux-support-2.6.31-trunk_2.6.31-1~experimental.1_all.deb
9f5f92ea64141e486a2733f0e7bc6d65 114522 devel optional linux-tree-2.6.31_2.6.31-1~experimental.1_all.deb
ad1b80057d971f8dd7e92107a8205689 117434 kernel optional firmware-linux-free_2.6.31-1~experimental.1_all.deb
9758113de609e09ec1ba3641687d30b7 27147072 kernel optional linux-image-2.6.31-trunk-amd64_2.6.31-1~experimental.1_amd64.deb
b79fc1a1a52d7589ed44a0005c1ebb77 439606 kernel optional linux-headers-2.6.31-trunk-amd64_2.6.31-1~experimental.1_amd64.deb
7d94ef022004c7ada9466c375e2bc26a 3739804 kernel optional linux-headers-2.6.31-trunk-common_2.6.31-1~experimental.1_amd64.deb
2fd468405f99a6516cfafedb9db6c4fa 114174 kernel optional linux-headers-2.6.31-trunk-all_2.6.31-1~experimental.1_amd64.deb
0a328e902506efb1e564e0b2428f3530 114176 kernel optional linux-headers-2.6.31-trunk-all-amd64_2.6.31-1~experimental.1_amd64.deb
3c869616302efbfaf34cf83d9aafae78 869558 devel optional linux-libc-dev_2.6.31-1~experimental.1_amd64.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkrJFDwACgkQeW7Lc5tEHqiXpgCgpUNlSxMryvYZLrN7yOkNhUVl
6ZMAn1IsQOgyCkq0FkN4VrJHq2lGMLTu
=Pwyo
-----END PGP SIGNATURE-----
--- End Message ---