--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.29-2-686: hardware wlan kill switch state isn't restored correctly if put back off
- From: Olivier Berger <olivier.berger@it-sudparis.eu>
- Date: Mon, 25 May 2009 19:58:17 +0200
- Message-id: <20090525175817.6446.6737.reportbug@hortense>
Package: linux-image-2.6.29-2-686
Version: 2.6.29-4
Severity: normal
When using network-manager, I cannot connect to wifi if I reactivate wirelless after having switched it off with the hardware kill-switch of my Dell Latitude D820.
I noticed some weird things after trying to debug the cause of the problem.
I have the following kill-switch information appearing in /sys at boot if kill-switch is off (meaning wireless activated) :
# for i in $(find /sys | grep -i kill | grep /state ); do echo -n "$i : " ; cat $i; done
/sys/devices/virtual/rfkill/rfkill0/state : 1
/sys/devices/virtual/rfkill/rfkill1/state : 1
/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/rfkill/rfkill2/state : 1
After I activate the kill-switch to disable networking, it gives :
# for i in $(find /sys | grep -i kill | grep /state ); do echo -n "$i : " ; cat $i; done
/sys/devices/virtual/rfkill/rfkill0/state : 2
/sys/devices/virtual/rfkill/rfkill1/state : 2
/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/rfkill/rfkill2/state : 2
However, after reactivating network (kill switch switched to off), I get only :
# for i in $(find /sys | grep -i kill | grep /state ); do echo -n "$i : " ; cat $i; done
/sys/devices/virtual/rfkill/rfkill0/state : 1
/sys/devices/virtual/rfkill/rfkill1/state : 1
/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/rfkill/rfkill2/state : 2
This probably explains the problem with network-manager (which is btw reflected in the killswitch.state shown with lshal :
--- hal-on.log 2009-05-25 19:17:06.000000000 +0200
+++ hal-back-on.log 2009-05-25 19:20:01.000000000 +0200
@@ -80,18 +80,18 @@
udi = '/org/freedesktop/Hal/devices/pci_8086_4222_rfkill_3945ABG_wlan'
info.addons.singleton = {'hald-addon-rfkill-killswitch'} (string list)
info.capabilities = {'killswitch'} (string list)
info.category = 'killswitch' (string)
info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4222' (string)
info.product = '3945ABG wlan Killswitch' (string)
info.subsystem = 'rfkill' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_4222_rfkill_3945ABG_wlan' (string)
info.vendor = 'Intel Corporation' (string)
killswitch.access_method = 'rfkill' (string)
killswitch.name = '3945ABG' (string)
- killswitch.state = 1 (0x1) (int)
+ killswitch.state = 2 (0x2) (int)
killswitch.type = 'wlan' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'rfkill' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/rfkill/rfkill2' (string)
This used to work fine with Network-Manager over 2.6.26, though.
Thanks in advance.
-- Package-specific info:
** Version:
Linux version 2.6.29-2-686 (Debian 2.6.29-4) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-8) ) #1 SMP Sun May 3 12:46:00 UTC 2009
** Command line:
root=/dev/sda5 ro pci=assign-busses vga=791
** Tainted: P (1)
** Kernel log:
[ 10.456549] coretemp coretemp.0: Using relative temperature scale!
[ 10.472451] coretemp coretemp.1: Using relative temperature scale!
[ 14.423356] fuse init (API version 7.11)
[ 14.531429] kjournald starting. Commit interval 5 seconds
[ 14.546631] EXT3 FS on sda3, internal journal
[ 14.561588] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.611015] kjournald starting. Commit interval 5 seconds
[ 14.626346] EXT3 FS on dm-3, internal journal
[ 14.641141] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.685104] kjournald starting. Commit interval 5 seconds
[ 14.699952] EXT3 FS on dm-2, internal journal
[ 14.714364] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.752134] kjournald starting. Commit interval 5 seconds
[ 14.766460] EXT3 FS on dm-0, internal journal
[ 14.780224] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.841000] kjournald starting. Commit interval 5 seconds
[ 14.854725] EXT3 FS on dm-1, internal journal
[ 14.868207] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.013563] kjournald starting. Commit interval 5 seconds
[ 15.027303] EXT3 FS on dm-4, internal journal
[ 15.040477] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.141855] kjournald starting. Commit interval 5 seconds
[ 15.155362] EXT3 FS on dm-6, internal journal
[ 15.168501] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.961074] kjournald starting. Commit interval 5 seconds
[ 18.974645] EXT3 FS on dm-5, internal journal
[ 18.987999] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.853875] platform microcode: firmware: requesting intel-ucode/06-0f-02
[ 22.920562] platform microcode: firmware: requesting intel-ucode/06-0f-02
[ 22.942887] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 25.550273] NET: Registered protocol family 10
[ 25.564710] lo: Disabled Privacy Extensions
[ 52.027501] Bluetooth: L2CAP ver 2.11
[ 52.040834] Bluetooth: L2CAP socket layer initialized
[ 52.191452] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 52.283180] Bluetooth: RFCOMM socket layer initialized
[ 52.295685] Bluetooth: RFCOMM TTY layer initialized
[ 52.308226] Bluetooth: RFCOMM ver 1.10
[ 52.320679] usbcore: registered new interface driver hiddev
[ 52.333112] usbcore: registered new interface driver usbhid
[ 52.345452] usbhid: v2.6:USB HID core driver
[ 54.873217] lp: driver loaded but no devices found
[ 54.950536] ppdev: user-space parallel port driver
[ 56.997427] tg3 0000:04:00.0: wake-up capability disabled by ACPI
[ 56.997444] tg3 0000:04:00.0: PME# disabled
[ 56.997613] tg3 0000:04:00.0: irq 29 for MSI/MSI-X
[ 57.093547] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 57.094659] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 57.094821] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[ 57.095013] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X
[ 57.095125] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 57.203388] iwl3945 loaded firmware version 15.28.2.8
[ 57.250205] Registered led device: iwl-phy0:radio
[ 57.250282] Registered led device: iwl-phy0:assoc
[ 57.250312] Registered led device: iwl-phy0:RX
[ 57.250340] Registered led device: iwl-phy0:TX
[ 57.262335] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 58.615306] tg3: eth1: Link is up at 100 Mbps, full duplex.
[ 58.615313] tg3: eth1: Flow control is on for TX and on for RX.
[ 58.615681] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 59.812117] wlan0: authenticate with AP 00:18:84:29:6a:6d
[ 59.819407] wlan0: authenticated
[ 59.819413] wlan0: associate with AP 00:18:84:29:6a:6d
[ 59.822083] wlan0: RX AssocResp from 00:18:84:29:6a:6d (capab=0x421 status=0 aid=1)
[ 59.822089] wlan0: associated
[ 59.823649] wlan0: disassociating by local choice (reason=3)
[ 60.147226] nvidia: module license 'NVIDIA' taints kernel.
[ 60.404635] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 60.404651] nvidia 0000:01:00.0: setting latency timer to 64
[ 60.405139] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 60.438595] IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
[ 69.152014] eth1: no IPv6 routers present
[ 107.716938] iwl3945: Radio Frequency Kill Switch is On:
[ 107.716942] Kill switch must be turned off for wireless networking to work.
[ 107.799400] usb 2-2.3: USB disconnect, address 3
[ 107.806193] btusb_intr_complete: hci0 urb f6b1a1c0 failed to resubmit (19)
[ 107.815013] btusb_send_frame: hci0 urb f6b1a1c0 submission failed
[ 111.278148] iwl3945: MAC is in deep sleep!
[ 111.285957] iwl3945: MAC is in deep sleep!
[ 111.294122] iwl3945: MAC is in deep sleep!
[ 111.303101] iwl3945 0000:03:00.0: PCI INT A disabled
[ 120.117117] usb 2-2.3: new full speed USB device using uhci_hcd and address 4
[ 120.277144] usb 2-2.3: New USB device found, idVendor=413c, idProduct=8103
[ 120.285991] usb 2-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 120.295134] usb 2-2.3: configuration #1 chosen from 1 choice
[ 132.829582] usb 2-2.3: USB disconnect, address 4
[ 132.839514] btusb_intr_complete: hci0 urb f63b3840 failed to resubmit (19)
[ 132.851177] btusb_send_frame: hci0 urb f63b3840 submission failed
[ 139.121109] usb 2-2.3: new full speed USB device using uhci_hcd and address 5
[ 139.281134] usb 2-2.3: New USB device found, idVendor=413c, idProduct=8103
[ 139.290680] usb 2-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 139.300356] usb 2-2.3: configuration #1 chosen from 1 choice
[ 170.678271] usb 2-2.3: USB disconnect, address 5
[ 170.687850] btusb_intr_complete: hci0 urb f63b3540 failed to resubmit (19)
[ 170.698867] btusb_send_frame: hci0 urb f63b3540 submission failed
[ 181.776391] warning: `q-agent' uses 32-bit capabilities (legacy support in use)
[ 205.952762] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 347.164179] CE: hpet increasing min_delta_ns to 15000 nsec
[ 347.164276] CE: hpet increasing min_delta_ns to 22500 nsec
[ 347.164371] CE: hpet increasing min_delta_ns to 33750 nsec
** Loaded modules:
Module Size Used by
tcp_diag 1224 0
inet_diag 8064 1 tcp_diag
nvidia 7215664 30
binfmt_misc 7168 1
ppdev 6224 0
parport_pc 22020 0
lp 7872 0
parport 30868 3 ppdev,parport_pc,lp
hid_gaff 2900 0
hid_pl 2996 0
hid_cypress 2340 0
hid_zpff 2652 0
hid_gyration 2196 0
hid_sony 2568 0
hid_ntrig 1744 0
hid_samsung 2112 0
hid_microsoft 3200 0
hid_tmff 3460 0
hid_monterey 2132 0
hid_ezkey 1832 0
hid_apple 5704 0
hid_a4tech 2500 0
hid_logitech 6656 0
usbhid 29132 5 hid_gaff,hid_pl,hid_zpff,hid_tmff,hid_logitech
rfcomm 29636 5
ff_memless 4264 5 hid_gaff,hid_pl,hid_zpff,hid_tmff,hid_logitech
hid_cherry 2100 0
hid_sunplus 1972 0
hid_petalynx 2468 0
hid_belkin 2284 0
hid_chicony 2004 0
hidp 12064 2
hid 34260 22 hid_gaff,hid_pl,hid_cypress,hid_zpff,hid_gyration,hid_sony,hid_ntrig,hid_samsung,hid_microsoft,hid_tmff,hid_monterey,hid_ezkey,hid_apple,hid_a4tech,hid_logitech,usbhid,hid_cherry,hid_sunplus,hid_petalynx,hid_belkin,hid_chicony,hidp
l2cap 17072 14 rfcomm,hidp
ipv6 232468 32
cpufreq_conservative 5456 0
cpufreq_powersave 1276 0
cpufreq_stats 3588 0
microcode 11148 0
fuse 48352 1
dm_crypt 11156 0
coretemp 5160 0
cpufreq_userspace 2748 2
acpi_cpufreq 7044 0
eeprom 4868 0
firewire_sbp2 12500 0
loop 12988 0
joydev 8560 0
snd_hda_codec_idt 48764 1
snd_hda_intel 22092 3
snd_hda_codec 58808 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 6000 1 snd_hda_codec
snd_pcm_oss 31708 0
snd_mixer_oss 12000 1 snd_pcm_oss
snd_pcm 62708 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2368 0
arc4 1544 2
snd_seq_oss 24756 0
ecb 2352 2
snd_seq_midi 5448 0
pcmcia 23312 0
snd_rawmidi 18544 1 snd_seq_midi
snd_seq_midi_event 6072 2 snd_seq_oss,snd_seq_midi
iwl3945 71640 0
snd_seq 42120 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17808 2 snd_pcm,snd_seq
snd_seq_device 6108 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
mac80211 135592 1 iwl3945
led_class 3668 1 iwl3945
snd 48420 18 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 36628 0
yenta_socket 21276 1
rsrc_nonstatic 9424 1 yenta_socket
i2c_i801 8104 0
lib80211 6076 1 iwl3945
btusb 10156 0
soundcore 6204 1 snd
dell_laptop 3148 0
rfkill 9576 5 iwl3945,dell_laptop
pcmcia_core 30784 3 pcmcia,yenta_socket,rsrc_nonstatic
serio_raw 4544 0
i2c_core 20828 3 nvidia,eeprom,i2c_i801
wmi 6332 0
evdev 8160 12
cfg80211 32996 2 iwl3945,mac80211
bluetooth 46052 6 rfcomm,hidp,l2cap,btusb
snd_page_alloc 8036 2 snd_hda_intel,snd_pcm
video 16348 6
output 2504 1 video
dcdbas 6728 1 dell_laptop
rng_core 3644 0
button 5672 0
battery 5832 0
ac 2872 0
ext3 107180 9
jbd 42500 1 ext3
mbcache 7180 1 ext3
dm_snapshot 17444 0
sd_mod 28252 6
crc_t10dif 1616 1 sd_mod
ide_pci_generic 3408 0
ide_core 91812 1 ide_pci_generic
ata_generic 4316 0
ata_piix 20092 6
libata 148892 2 ata_generic,ata_piix
tg3 91048 0
uhci_hcd 19392 0
ehci_hcd 29936 0
scsi_mod 132076 3 firewire_sbp2,sd_mod,libata
firewire_ohci 18620 0
firewire_core 33504 2 firewire_sbp2,firewire_ohci
crc_itu_t 1796 1 firewire_core
libphy 19424 1 tg3
intel_agp 22548 0
usbcore 124912 6 hid_sony,usbhid,btusb,uhci_hcd,ehci_hcd
agpgart 30624 2 nvidia,intel_agp
thermal 15092 0
processor 39540 4 acpi_cpufreq,thermal
fan 4104 0
thermal_sys 10272 4 video,thermal,processor,fan
dm_mirror 12468 0
dm_region_hash 10632 1 dm_mirror
dm_log 8588 2 dm_mirror,dm_region_hash
dm_mod 48856 28 dm_crypt,dm_snapshot,dm_mirror,dm_log
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Dell Device [1028:01cc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ed000000-efefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell Device [1028:01cc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: ecf00000-ecffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: ece00000-ecefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ecc00000-ecdfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01cc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01cc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01cc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01cc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01cc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: ecb00000-ecbfffff
Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
Subsystem: Dell Device [1028:01cc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master])
Subsystem: Dell Device [1028:01cc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
Subsystem: Dell Device [1028:01cc]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:01cc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ee000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at ef000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1021]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ecfff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
Subsystem: Dell Device [1028:01cc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at ecef0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
06:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21)
Subsystem: Dell Device [1028:01cc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ecb00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 54000000-57fff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
06:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01cc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ecbff000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at ecbfe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'testing-proposed-updates')
Architecture: i386 (i686)
Kernel: Linux 2.6.29-2-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.29-2-686 depends on:
ii debconf [debconf-2.0] 1.5.26 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.2 tools for generating an initramfs
ii module-init-tools 3.7-pre9-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.29-2-686 recommends:
ii libc6-i686 2.9-12 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.29-2-686 suggests:
ii grub 0.97-53 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.29 <none> (no description available)
-- debconf information:
linux-image-2.6.29-2-686/preinst/overwriting-modules-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/bootloader-error-2.6.29-2-686:
linux-image-2.6.29-2-686/preinst/abort-install-2.6.29-2-686:
linux-image-2.6.29-2-686/preinst/failed-to-move-modules-2.6.29-2-686:
linux-image-2.6.29-2-686/preinst/initrd-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/old-dir-initrd-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/old-initrd-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/bootloader-test-error-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/depmod-error-initrd-2.6.29-2-686: false
linux-image-2.6.29-2-686/preinst/elilo-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/lilo-initrd-2.6.29-2-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.29-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.29-2-686/postinst/depmod-error-2.6.29-2-686: false
linux-image-2.6.29-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.29-2-686/postinst/create-kimage-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/prerm/removing-running-kernel-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/old-system-map-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/bootloader-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/prerm/would-invalidate-boot-loader-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/abort-overwrite-2.6.29-2-686:
--- End Message ---