Bug#444880: closed by Bastian Blank <waldi@debian.org> (works)
found 444880 2.6.26-5
thanks
Bastian, what kernel are you running?
I'm getting "0" (which isn't the expected "read" either) on the
following kernel:
Linux version 2.6.26-1-686 (Debian 2.6.26-5) (waldi@debian.org) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep
10 16:46:13 UTC 2008
Regards //Johan
2008/10/6 Debian Bug Tracking System <owner@bugs.debian.org>:
>
> This is an automatic notification regarding your Bug report
> which was filed against the linux-2.6 package:
>
> #444880: /boot/vmlinuz-2.6.21-2-686: /proc/20502/wchan has unexpected content, trivial repro
>
> It has been closed by Bastian Blank <waldi@debian.org>.
>
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact Bastian Blank <waldi@debian.org> by
> replying to this email.
>
>
> --
> 444880: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=444880
> Debian Bug Tracking System
> Contact owner@bugs.debian.org with problems
>
>
> ---------- Vidarebefordrat meddelande ----------
> From: Bastian Blank <waldi@debian.org>
> To: 444880-done@bugs.debian.org
> Date: Mon, 6 Oct 2008 19:16:52 +0200
> Subject: works
> Works here flawless.
>
> Bastian
>
> --
> There are some things worth dying for.
> -- Kirk, "Errand of Mercy", stardate 3201.7
>
>
>
> ---------- Vidarebefordrat meddelande ----------
> From: Johan Walles <johan.walles@gmail.com>
> To: Debian Bug Tracking System <submit@bugs.debian.org>
> Date: Mon, 01 Oct 2007 18:16:02 +0200
> Subject: /boot/vmlinuz-2.6.21-2-686: /proc/20502/wchan has unexpected content, trivial repro
> Package: linux-image-2.6.21-2-686
> Version: 2.6.21-6
> Severity: normal
> File: /boot/vmlinuz-2.6.21-2-686
>
>
> Try this:
> 1. At one prompt, do "cat".
> Now, switch to another prompt and...
> 2. Do "pstree -p|grep cat" to find out the PID of your cat command. I
> get 20502.
> 3. Do "cat /proc/20502/wchan". I get "_stext" here.
> 4. Do "strace -p 20502". I get "read(0, <unfinished ...>" here.
>
> According to "man proc", wchan "is the "channel" in which the process
> is waiting. It is the address of a system call". "_stext" doesn't seem
> to fit that description.
>
> I would like the output of cat /proc/20502/wchan to agree with strace.
>
> Otherwise creating "bottom" (the opposite of "top") can't be done with
> just a few lines of shell scripting as I had intended :-(.
>
> Regards //Johan
>
> -- Package-specific info:
> ** Version: Linux version 2.6.21-2-686 (Debian 2.6.21-6) (waldi@debian.org) (gcc version 4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) #1 SMP Wed Jul 11 03:53:02 UTC 2007
>
> ** Not tainted
>
> ** Kernel log:
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.3: irq 22, io base 0x00002060
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 20
> e100: eth1: e100_probe: addr 0xe0420000, irq 20, MAC addr 00:02:B3:94:C4:C0
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ICH7: IDE controller at PCI slot 0000:00:1f.1
> ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17
> ICH7: chipset revision 1
> ICH7: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0x20a0-0x20a7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0x20a8-0x20af, BIOS settings: hdc:pio, hdd:pio
> Probing IDE interface ide0...
> usb 3-1: new low speed USB device using uhci_hcd and address 2
> usb 3-1: configuration #1 chosen from 1 choice
> hda: HL-DT-STDVDRRW GWA-4166B, ATAPI CD/DVD-ROM drive
> usb 3-2: new full speed USB device using uhci_hcd and address 3
> usb 3-2: configuration #1 chosen from 1 choice
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> usb 4-2: new low speed USB device using uhci_hcd and address 2
> usb 4-2: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver hiddev
> input: A4Tech USB Optical Mouse as /class/input/input1
> input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.1-1
> input: Logitech Logitech Extreme 3D Pro as /class/input/input2
> input: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D Pro] on usb-0000:00:1d.2-2
> usbcore: registered new interface driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(44)
> Uniform CD-ROM driver Revision: 3.20
> floppy0: no floppy controllers found
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> input: PC Speaker as /class/input/input3
> Real Time Clock Driver v1.12ac
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
> iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x7860)
> iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> parport0: Printer, Brother HL-2070N series
> intel_rng: Firmware space is locked read-only. If you can't or
> intel_rng: don't want to disable this in firmware setup, and if
> intel_rng: you are certain that your system has a functional
> intel_rng: RNG, try using the 'no_fwh_detect' option.
> cdc_acm 3-2:1.1: ttyACM0: USB ACM device
> cdc_acm 3-2:1.3: ttyACM1: USB ACM device
> cdc_acm 3-2:1.5: ttyACM2: USB ACM device
> usbcore: registered new interface driver cdc_acm
> drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> floppy0: no floppy controllers found
> EXT3 FS on sda2, internal journal
> smsc47b397: found SMSC SCH5307-NS (base address 0x0480, revision 0)
> device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
> NTFS driver 2.1.28 [Flags: R/W MODULE].
> NTFS volume version 3.1.
> e100: eth1: e100_watchdog: link up, 10Mbps, half-duplex
> PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006)
> PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006)
> PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006)
> tg3: eth0: Link is up at 100 Mbps, full duplex.
> tg3: eth0: Flow control is on for TX and on for RX.
> PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006)
> PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006)
> tg3: eth0: Link is up at 100 Mbps, full duplex.
> tg3: eth0: Flow control is on for TX and on for RX.
> ip_tables: (C) 2000-2006 Netfilter Core Team
> Netfilter messages via NETLINK v0.30.
> nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
> input: Power Button (FF) as /class/input/input4
> ACPI: Power Button (FF) [PWRF]
> input: Power Button (CM) as /class/input/input5
> ACPI: Power Button (CM) [PBTN]
> lp0: using parport0 (interrupt-driven).
> ppdev: user-space parallel port driver
> ata1.00: configured for UDMA/100
> ata1: EH complete
> SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> ISO 9660 Extensions: Microsoft Joliet Level 1
> ISOFS: changing to secondary root
> atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
> atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
> atkbd.c: Unknown key released (translated set 2, code 0x88 on isa0060/serio0).
> atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
> usb 3-2: USB disconnect, address 3
> usb 3-2: new full speed USB device using uhci_hcd and address 4
> usb 3-2: configuration #1 chosen from 1 choice
> cdc_acm 3-2:1.1: ttyACM0: USB ACM device
> cdc_acm 3-2:1.3: ttyACM1: USB ACM device
> cdc_acm 3-2:1.5: ttyACM2: USB ACM device
>
> ** Loaded modules:
> Module Size Used by
> isofs 32796 1
> ppdev 8580 0
> lp 10884 0
> button 7952 0
> ac 5220 0
> battery 10020 0
> acpi_cpufreq 8680 0
> cpufreq_userspace 4128 0
> cpufreq_stats 5120 0
> cpufreq_powersave 1792 0
> cpufreq_ondemand 7884 2
> freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
> cpufreq_conservative 6888 0
> ipt_MASQUERADE 3616 1
> xt_tcpudp 3104 23
> iptable_nat 7236 1
> nf_nat 17740 2 ipt_MASQUERADE,iptable_nat
> xt_state 2432 1
> ipt_LOG 6144 4
> nf_conntrack_ftp 9632 0
> nf_conntrack_ipv4 17612 3 iptable_nat
> nf_conntrack 58472 6 ipt_MASQUERADE,iptable_nat,nf_nat,xt_state,nf_conntrack_ftp,nf_conntrack_ipv4
> nfnetlink 6456 3 nf_nat,nf_conntrack_ipv4,nf_conntrack
> iptable_filter 2944 1
> ip_tables 12164 2 iptable_nat,iptable_filter
> x_tables 14468 6 ipt_MASQUERADE,xt_tcpudp,iptable_nat,xt_state,ipt_LOG,ip_tables
> nls_iso8859_1 4128 2
> ntfs 203264 1
> dm_snapshot 16420 0
> dm_mirror 20116 0
> dm_mod 52556 2 dm_snapshot,dm_mirror
> smsc47b397 6020 0
> i2c_isa 5216 1 smsc47b397
> i2c_core 20480 2 smsc47b397,i2c_isa
> snd_hda_intel 20312 2
> snd_hda_codec 198336 1 snd_hda_intel
> snd_pcm_oss 39168 1
> snd_pcm 71940 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd_mixer_oss 15328 1 snd_pcm_oss
> snd_seq_dummy 3748 0
> snd_seq_oss 29248 0
> snd_seq_midi 8160 0
> snd_rawmidi 22400 1 snd_seq_midi
> snd_seq_midi_event 6880 2 snd_seq_oss,snd_seq_midi
> snd_seq 46160 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> snd_timer 20868 2 snd_pcm,snd_seq
> snd_seq_device 7596 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
> snd 48132 16 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> psmouse 34952 0
> parport_pc 32740 1
> cdc_acm 14080 0
> joydev 9152 0
> evdev 9216 3
> soundcore 7424 2 snd
> iTCO_wdt 9956 0
> serio_raw 6564 0
> parport 33672 3 ppdev,lp,parport_pc
> tsdev 7520 0
> snd_page_alloc 9512 2 snd_hda_intel,snd_pcm
> rtc 12760 0
> pcspkr 3136 0
> ext3 120904 1
> jbd 55208 1 ext3
> mbcache 8164 1 ext3
> ide_cd 36512 1
> cdrom 32768 1 ide_cd
> usbhid 23488 0
> hid 23680 1 usbhid
> piix 9508 0 [permanent]
> generic 4804 0 [permanent]
> ide_core 115016 3 ide_cd,piix,generic
> e100 32488 0
> mii 5280 1 e100
> uhci_hcd 22608 0
> ata_generic 8100 0
> ehci_hcd 30796 0
> usbcore 123272 5 cdc_acm,usbhid,uhci_hcd,ehci_hcd
> tg3 99844 0
> thermal 14120 0
> processor 30888 2 acpi_cpufreq,thermal
> fan 4868 0
> sd_mod 19904 3
> ahci 20068 2
> libata 109172 2 ata_generic,ahci
> scsi_mod 133740 2 sd_mod,libata
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation 955X Express Memory Controller Hub [8086:2774]
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 0
> Capabilities: <access denied>
>
> 00:01.0 PCI bridge [0604]: Intel Corporation 955X Express PCI Express Root Port [8086:2775] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> Memory behind bridge: e1000000-e31fffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> Capabilities: <access denied>
>
> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at e0a00000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
>
> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: <access denied>
>
> 00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: <access denied>
>
> 00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
> Memory behind bridge: e0500000-e07fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: <access denied>
>
> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 19
> Region 4: I/O ports at 2000 [size=32]
>
> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 20
> Region 4: I/O ports at 2020 [size=32]
>
> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin C routed to IRQ 21
> Region 4: I/O ports at 2040 [size=32]
>
> 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin D routed to IRQ 22
> Region 4: I/O ports at 2060 [size=32]
>
> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at e0a04000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
>
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
> I/O behind bridge: 00001000-00001fff
> Memory behind bridge: e0200000-e04fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: <access denied>
>
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: <access denied>
>
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 17
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at 20a0 [size=16]
>
> 00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI [8086:27c1] (rev 01) (prog-if 01 [AHCI 1.0])
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 219
> Region 0: I/O ports at 20d0 [size=8]
> Region 1: I/O ports at 20e8 [size=4]
> Region 2: I/O ports at 20d8 [size=8]
> Region 3: I/O ports at 20ec [size=4]
> Region 4: I/O ports at 20b0 [size=16]
> Region 5: Memory at e0a04400 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
>
> 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [Quadro NVS 285] [10de:0165] (rev a1) (prog-if 00 [VGA])
> Subsystem: nVidia Corporation Unknown device [10de:029d]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=16M]
> [virtual] Expansion ROM at e0000000 [disabled] [size=128K]
> Capabilities: <access denied>
>
> 05:09.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 0d)
> Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter [8086:1050]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at e0420000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 1000 [size=64]
> Region 2: Memory at e0400000 (32-bit, non-prefetchable) [size=128K]
> Capabilities: <access denied>
>
> 3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01)
> Subsystem: Hewlett-Packard Company Unknown device [103c:3013]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 218
> Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: <access denied>
>
>
>
> -- System Information:
> Debian Release: lenny/sid
> APT prefers testing
> APT policy: (990, 'testing')
> Architecture: i386 (i686)
>
> Kernel: Linux 2.6.21-2-686 (SMP w/2 CPU cores)
> Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/bash
>
> Versions of packages linux-image-2.6.21-2-686 depends on:
> ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs
> ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.21-2-686 recommends:
> ii libc6-i686 2.6.1-1+b1 GNU C Library: Shared libraries [i
>
> -- debconf information:
> linux-image-2.6.21-2-686/preinst/elilo-initrd-2.6.21-2-686: true
> linux-image-2.6.21-2-686/preinst/lilo-has-ramdisk:
> linux-image-2.6.21-2-686/preinst/already-running-this-2.6.21-2-686:
> linux-image-2.6.21-2-686/postinst/depmod-error-initrd-2.6.21-2-686: false
> linux-image-2.6.21-2-686/postinst/bootloader-test-error-2.6.21-2-686:
> linux-image-2.6.21-2-686/prerm/removing-running-kernel-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/kimage-is-a-directory:
> linux-image-2.6.21-2-686/preinst/failed-to-move-modules-2.6.21-2-686:
> linux-image-2.6.21-2-686/preinst/initrd-2.6.21-2-686:
> linux-image-2.6.21-2-686/preinst/overwriting-modules-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/create-kimage-link-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/old-system-map-link-2.6.21-2-686: true
> shared/kernel-image/really-run-bootloader: true
> linux-image-2.6.21-2-686/prerm/would-invalidate-boot-loader-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/old-initrd-link-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/bootloader-error-2.6.21-2-686:
> linux-image-2.6.21-2-686/preinst/lilo-initrd-2.6.21-2-686: true
> linux-image-2.6.21-2-686/preinst/bootloader-initrd-2.6.21-2-686: true
> linux-image-2.6.21-2-686/postinst/old-dir-initrd-link-2.6.21-2-686: true
> linux-image-2.6.21-2-686/preinst/abort-overwrite-2.6.21-2-686:
> linux-image-2.6.21-2-686/postinst/depmod-error-2.6.21-2-686: false
> linux-image-2.6.21-2-686/preinst/abort-install-2.6.21-2-686:
>
>
>
>
Reply to: