--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.21-1-powerpc: keyboard and touchpad doesn't work
- From: Emil Nowak <emil5@go2.pl>
- Date: Thu, 14 Jun 2007 12:14:38 +0200
- Message-id: <20070614101438.3308.1970.reportbug@japcok>
Package: linux-image-2.6.21-1-powerpc
Version: 2.6.21-4
Severity: important
After booting up on 2.6.21 keyboard and tuchpad doesn't work. I have few
kernels, and last fully-working kernel is 2.6.18-4-powerpc.
Simpliy rebooting on old kernel makes keyboard avalialble again.
Attached kernel.log diff betweeen 2.6.18 (working keyboard), and 2.6.20 (not
working).
-- Package-specific info:
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.18-4-powerpc
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.21-1-powerpc depends on:
ii initramfs-tools [linux-initr 0.87b tools for generating an initramfs
ii mkvmlinuz 33 create a kernel to boot a PowerPC
ii module-init-tools 3.3-pre11-1 tools for managing Linux kernel mo
linux-image-2.6.21-1-powerpc recommends no packages.
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.21-1-powerpc/preinst/bootloader-initrd-2.6.21-1-powerpc: true
linux-image-2.6.21-1-powerpc/prerm/removing-running-kernel-2.6.21-1-powerpc: true
linux-image-2.6.21-1-powerpc/preinst/lilo-has-ramdisk:
linux-image-2.6.21-1-powerpc/postinst/old-dir-initrd-link-2.6.21-1-powerpc: true
linux-image-2.6.21-1-powerpc/postinst/depmod-error-initrd-2.6.21-1-powerpc: false
linux-image-2.6.21-1-powerpc/postinst/old-system-map-link-2.6.21-1-powerpc: true
linux-image-2.6.21-1-powerpc/preinst/elilo-initrd-2.6.21-1-powerpc: true
linux-image-2.6.21-1-powerpc/postinst/bootloader-error-2.6.21-1-powerpc:
linux-image-2.6.21-1-powerpc/preinst/abort-install-2.6.21-1-powerpc:
linux-image-2.6.21-1-powerpc/postinst/create-kimage-link-2.6.21-1-powerpc: true
linux-image-2.6.21-1-powerpc/preinst/overwriting-modules-2.6.21-1-powerpc: true
linux-image-2.6.21-1-powerpc/postinst/bootloader-test-error-2.6.21-1-powerpc:
linux-image-2.6.21-1-powerpc/preinst/initrd-2.6.21-1-powerpc:
linux-image-2.6.21-1-powerpc/preinst/lilo-initrd-2.6.21-1-powerpc: true
linux-image-2.6.21-1-powerpc/preinst/failed-to-move-modules-2.6.21-1-powerpc:
linux-image-2.6.21-1-powerpc/preinst/abort-overwrite-2.6.21-1-powerpc:
linux-image-2.6.21-1-powerpc/prerm/would-invalidate-boot-loader-2.6.21-1-powerpc: true
linux-image-2.6.21-1-powerpc/postinst/depmod-error-2.6.21-1-powerpc: false
linux-image-2.6.21-1-powerpc/postinst/kimage-is-a-directory:
linux-image-2.6.21-1-powerpc/preinst/already-running-this-2.6.21-1-powerpc:
linux-image-2.6.21-1-powerpc/postinst/old-initrd-link-2.6.21-1-powerpc: true
--- kern.2.6.18-4.striped.log 2007-06-14 12:02:42.000000000 +0200
+++ kern.2.6.21.striped.log 2007-06-14 12:02:53.000000000 +0200
@@ -1,12 +1,12 @@
klogd 1.4.1#17.2, log source = /proc/kmsg started.
-Inspecting /boot/System.map-2.6.18-4-powerpc
-Loaded 23099 symbols from /boot/System.map-2.6.18-4-powerpc.
-Symbols match kernel version 2.6.18.
+Inspecting /boot/System.map-2.6.21-1-powerpc
+Loaded 24453 symbols from /boot/System.map-2.6.21-1-powerpc.
+Symbols match kernel version 2.6.21.
No module symbols loaded - kernel modules not enabled.
Using PowerMac machine description
Total memory = 256MB; using 512kB for hash table (at cff80000)
-Linux version 2.6.18-4-powerpc (Debian 2.6.18.dfsg.1-11) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Wed Feb 21 13:39:54 CET 2007
-Found initrd at 0xc1900000:0xc1e1a000
+Linux version 2.6.21-1-powerpc (Debian 2.6.21-4) (waldi@debian.org) (gcc version 4.1.3 20070518 (prerelease) (Debian 4.1.2-8)) #1 Sat May 26 14:30:26 CEST 2007
+Found initrd at 0xc1900000:0xc1eb1000
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
Mapped at 0xfdfc0000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
@@ -14,6 +14,7 @@
PowerMac motherboard: iBook G4
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
+Entering add_active_range(0, 0, 65536) 0 entries of 256 used
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
@@ -25,14 +26,24 @@
nvram: NR partition at 0x1120
Top of RAM: 0x10000000, Total RAM: 0x10000000
Memory hole size: 0MB
+Zone PFN ranges:
+ DMA 0 -> 65536
+ Normal 65536 -> 65536
+ HighMem 65536 -> 65536
+early_node_map[1] active PFN ranges
+ 0: 0 -> 65536
On node 0 totalpages: 65536
- DMA zone: 65536 pages, LIFO batch:15
-Built 1 zonelists. Total pages: 65536
+ DMA zone: 512 pages used for memmap
+ DMA zone: 0 pages reserved
+ DMA zone: 65024 pages, LIFO batch:15
+ Normal zone: 0 pages used for memmap
+ HighMem zone: 0 pages used for memmap
+Built 1 zonelists. Total pages: 65024
Kernel command line: root=/dev/hda4 ro
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
-PID hash table entries: 2048 (order: 11, 8192 bytes)
+PID hash table entries: 1024 (order: 10, 4096 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 18.432000 MHz
time_init: processor frequency = 1066.666664 MHz
@@ -41,15 +52,13 @@
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
High memory: 0k
-Memory: 250232k/262144k available (2920k kernel code, 11588k reserved, 272k data, 197k bss, 180k init)
+Memory: 249472k/262144k available (3272k kernel code, 12388k reserved, 124k data, 189k bss, 188k init)
Calibrating delay loop... 36.73 BogoMIPS (lpj=73472)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
-checking if image is initramfs... it is
-Freeing initrd memory: 5224k freed
NET: Registered protocol family 16
KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
channel 0 bus <multibus>
@@ -64,20 +73,24 @@
PCI: Cannot allocate resource region 0 of device 0001:10:19.0
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
-TCP established hash table entries: 8192 (order: 3, 32768 bytes)
-TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
-TCP: Hash tables configured (established 8192 bind 4096)
+TCP established hash table entries: 8192 (order: 4, 65536 bytes)
+TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
+checking if image is initramfs... it is
+Freeing initrd memory: 5828k freed
Thermal assist unit not available
Registering PowerMac CPU frequency driver
Low: 533 Mhz, High: 1066 Mhz, Boot: 533 Mhz
audit: initializing netlink socket (disabled)
-audit(1181814946.488:1): initialized
+audit(1181812775.652:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
-Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
@@ -87,6 +100,10 @@
radeonfb: Retrieved PLL infos from Open Firmware
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
+i2c_adapter i2c-2: unable to read EDID block.
+
+i2c_adapter i2c-3: unable to read EDID block.
+
radeonfb: Monitor 1 type LCD found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
@@ -126,20 +143,7 @@
hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
hdc: Enabling MultiWord DMA 2
ide1 at 0xd1012000-0xd1012007,0xd1012160 on irq 24
-mice: PS/2 mouse device common for all mice
-TCP bic registered
-NET: Registered protocol family 1
-NET: Registered protocol family 17
-input: PMU as /class/input/input4
-Freeing unused kernel memory: 180k init
-PowerMac i2c bus pmu 2 registered
-PowerMac i2c bus pmu 1 registered
-PowerMac i2c bus mac-io 0 registered
-PowerMac i2c bus uni-n 1 registered
-PowerMac i2c bus uni-n 0 registered
-usbcore: registered new driver usbfs
-usbcore: registered new driver hub
-ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
+ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
@@ -149,7 +153,6 @@
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
-ieee1394: Initialized config rom entry `ip1394'
PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
ohci_hcd 0001:10:1b.0: OHCI Host Controller
ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
@@ -157,9 +160,6 @@
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
-hda: max request size: 512KiB
-hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
-Uniform CD-ROM driver Revision: 3.20
PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
ohci_hcd 0001:10:1b.1: OHCI Host Controller
ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3
@@ -167,9 +167,17 @@
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
-hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
-hda: cache flushes supported
- hda: [mac] hda1 hda2 hda3 hda4 hda5
+mice: PS/2 mouse device common for all mice
+TCP bic registered
+NET: Registered protocol family 1
+NET: Registered protocol family 17
+input: PMU as /class/input/input4
+Freeing unused kernel memory: 188k init
+PowerMac i2c bus pmu 2 registered
+PowerMac i2c bus pmu 1 registered
+PowerMac i2c bus mac-io 0 registered
+PowerMac i2c bus uni-n 1 registered
+PowerMac i2c bus uni-n 0 registered
PCI: Enabling device 0001:10:1b.2 (0004 -> 0006)
ehci_hcd 0001:10:1b.2: EHCI Host Controller
ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4
@@ -178,48 +186,52 @@
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
+ieee1394: Initialized config rom entry `ip1394'
+PCI: Enabling device 0002:20:0e.0 (0000 -> 0002)
+ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
+hda: max request size: 512KiB
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
-PHY ID: 4061e4, addr: 0
+hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
+hda: cache flushes supported
+ hda:<7>PHY ID: 4061e4, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:49:8d:ce
eth0: Found BCM5221 PHY
-PCI: Enabling device 0002:20:0e.0 (0000 -> 0002)
-ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8]
+ [mac] hda1 hda2 hda3 hda4 hda5
+hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
+Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe498dce]
eth0: Link is up at 100 Mbps, full-duplex.
+Linux agpgart interface v0.102 (c) Dave Jones
+agpgart: Detected Apple UniNorth 2 chipset
+agpgart: configuring for size idx: 8
+agpgart: AGP aperture is 32M @ 0x0
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
-ts: Compaq touchscreen protocol output
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
bcm43xx driver
PCI: Enabling device 0001:10:12.0 (0004 -> 0006)
bcm43xx: Chip ID 0x4306, rev 0x2
bcm43xx: Number of cores: 6
-bcm43xx: Core 0: ID 0x800, rev 0x2, vendor 0x4243, enabled
-bcm43xx: Core 1: ID 0x812, rev 0x4, vendor 0x4243, disabled
-bcm43xx: Core 2: ID 0x80d, rev 0x1, vendor 0x4243, enabled
-bcm43xx: Core 3: ID 0x807, rev 0x1, vendor 0x4243, disabled
-bcm43xx: Core 4: ID 0x804, rev 0x7, vendor 0x4243, enabled
-bcm43xx: Core 5: ID 0x812, rev 0x4, vendor 0x4243, disabled
-bcm43xx: Ignoring additional 802.11 core.
+bcm43xx: Core 0: ID 0x800, rev 0x2, vendor 0x4243
+bcm43xx: Core 1: ID 0x812, rev 0x4, vendor 0x4243
+bcm43xx: Core 2: ID 0x80d, rev 0x1, vendor 0x4243
+bcm43xx: Core 3: ID 0x807, rev 0x1, vendor 0x4243
+bcm43xx: Core 4: ID 0x804, rev 0x7, vendor 0x4243
+bcm43xx: Core 5: ID 0x812, rev 0x4, vendor 0x4243
+bcm43xx: Ignoring additional 802.11a core.
bcm43xx: PHY connected
-bcm43xx: Detected PHY: Version: 1, Type 2, Revision 1
+bcm43xx: Detected PHY: Analog: 1, Type 2, Revision 1
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
-Linux agpgart interface v0.101 (c) Dave Jones
-agpgart: Detected Apple UniNorth 2 chipset
-agpgart: configuring for size idx: 4
-agpgart: AGP aperture is 16M @ 0x0
Adding 750760k swap on /dev/hda5. Priority:-1 extents:1 across:750760k
EXT3 FS on hda4, internal journal
apm_emu: APM Emulation 0.5 initialized.
SCSI subsystem initialized
-ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
-ieee1394: sbp2: Try serialize_io=0 for better performance
input: PowerMac Beep as /class/input/input5
adt746x: version 1 (supported)
adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
@@ -228,8 +240,8 @@
sensor 2: GPU ON DIE
adt746x: ADT7467 initializing
adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70
-device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
-fuse init (API version 7.7)
+device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
+fuse init (API version 7.8)
hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only.
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
@@ -238,15 +250,21 @@
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
+bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
-bcm43xx: 32-bit DMA initialized
-bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
+bcm43xx: 30-bit DMA initialized
+bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1144
-bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1130
+bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1146
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Open Authentication completed with 00:06:25:c3:d6:5d
-input: Mouseemu virtual keyboard as /class/input/input6
-input: Mouseemu virtual mouse as /class/input/input7
+[drm] Initialized drm 1.1.0 20060810
+[drm] Initialized radeon 1.25.0 20060524 on minor 0
+agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
+agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
+[drm] Setting GART location based on new memory map
+[drm] Loading R200 Microcode
+[drm] writeback test succeeded in 1 usecs
--- End Message ---