Bug#486346: linux-image-2.6.25-2-amd64: lid switch hangs and resets laptop
Package: linux-image-2.6.25-2-amd64
Version: 2.6.25-5
Severity: important
Kernel hangs and resets system after lid switch is pressed. Problem occurs often but not always. It was found on HP Compaq 6710S.
-- Package-specific info:
** Version:
Linux version 2.6.25-2-amd64 (Debian 2.6.25-5) (waldi@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Thu Jun 12 15:38:32 UTC 2008
** Command line:
root=/dev/mapper/sda3_crypt ro quiet
** Not tainted
** Kernel log:
[ 5.613166] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 16.125550] ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
[ 16.125563] ReiserFS: dm-0: using ordered data mode
[ 16.138943] ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 16.139514] ReiserFS: dm-0: checking transaction log (dm-0)
[ 22.073445] ReiserFS: dm-0: replayed 55 transactions in 6 seconds
[ 22.113352] ReiserFS: dm-0: Using r5 hash to sort names
[ 26.070153] input: PC Speaker as /class/input/input2
[ 26.398957] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 26.399035] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 26.399072] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 26.453478] input: Power Button (FF) as /class/input/input3
[ 26.498823] ACPI: Power Button (FF) [PWRF]
[ 26.498937] input: Sleep Button (CM) as /class/input/input4
[ 26.562841] ACPI: Sleep Button (CM) [C2C0]
[ 26.562921] input: Lid Switch as /class/input/input5
[ 26.595013] ACPI: Lid Switch [C153]
[ 26.595876] ACPI: AC Adapter [C236] (off-line)
[ 26.605344] agpgart: Detected an Intel 965GM Chipset.
[ 26.605985] agpgart: Detected 7676K stolen memory.
[ 26.618874] agpgart: AGP aperture is 256M @ 0xd0000000
[ 26.670343] ACPI: Battery Slot [C238] (battery present)
[ 26.671115] ACPI: Battery Slot [C237] (battery absent)
[ 26.671239] ACPI: WMI: Mapper loaded
[ 26.794376] Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c0]
[ 26.920944] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[ 26.920948] Socket status: 30000006
[ 26.920951] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 26.920956] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 26.920959] pcmcia: parent PCI bridge Memory window: 0xe4200000 - 0xe42fffff
[ 26.920961] pcmcia: parent PCI bridge Memory window: 0x70000000 - 0x73ffffff
[ 26.964976] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
[ 26.964976] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 27.000977] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 27.322095] ACPI: device:02 is registered as cooling_device7
[ 27.322909] input: Video Bus as /class/input/input7
[ 27.361891] ACPI: Video Device [C098] (multi-head: yes rom: no post: no)
[ 27.240954] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
[ 27.240958] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 27.241085] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 27.241100] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 27.241122] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 27.305520] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 27.528221] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 27.796961] ACPI: PCI interrupt for device 0000:10:00.0 disabled
[ 27.698829] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 27.698860] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 39.949995] ReiserFS: dm-0: Removing [53309 68953 0x0 SD]..done
[ 39.950069] ReiserFS: dm-0: Removing [1716 42053 0x0 SD]..done
[ 39.950120] ReiserFS: dm-0: Removing [1716 38292 0x0 SD]..done
[ 39.950149] ReiserFS: dm-0: Removing [1716 35849 0x0 SD]..done
[ 39.950225] ReiserFS: dm-0: Removing [1716 35242 0x0 SD]..done
[ 39.950273] ReiserFS: dm-0: Removing [1716 34233 0x0 SD]..done
[ 39.950297] ReiserFS: dm-0: There were 6 uncompleted unlinks/truncates. Completed
[ 40.644263] loop: module loaded
[ 47.231017] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[ 47.231031] ReiserFS: sda1: using ordered data mode
[ 47.523251] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 47.523932] ReiserFS: sda1: checking transaction log (sda1)
[ 47.250790] ReiserFS: sda1: Using r5 hash to sort names
[ 47.299715] Adding 1951888k swap on /dev/mapper/sda2_crypt. Priority:-1 extents:1 across:1951888k
[ 53.758914] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 54.195058] NET: Registered protocol family 10
[ 54.195611] lo: Disabled Privacy Extensions
[ 61.237771] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 61.237947] PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006)
[ 61.156932] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 61.620016] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 68.402841] [drm] Initialized drm 1.1.0 20060810
[ 68.651697] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 68.651716] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 68.651986] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 104.805570] wlan0: Initial auth_alg=0
[ 104.805577] wlan0: authenticate with AP 00:01:24:f4:2d:c2
[ 105.012924] CPU0 attaching NULL sched-domain.
[ 105.012940] CPU1 attaching NULL sched-domain.
[ 105.031117] CPU0 attaching sched-domain:
[ 105.031128] domain 0: span 00000003
[ 105.031132] groups: 00000001 00000002
[ 105.031141] domain 1: span 00000003
[ 105.031145] groups: 00000003
[ 105.031150] domain 2: span 00000003
[ 105.031154] groups: 00000003
[ 105.031163] CPU1 attaching sched-domain:
[ 105.031168] domain 0: span 00000003
[ 105.031174] groups: 00000002 00000001
[ 105.031184] domain 1: span 00000003
[ 105.031189] groups: 00000003
[ 105.031197] domain 2: span 00000003
[ 105.031203] groups: 00000003
[ 105.001023] wlan0: authenticate with AP 00:01:24:f4:2d:c2
[ 105.003645] wlan0: RX authentication from 00:01:24:f4:2d:c2 (alg=0 transaction=2 status=0)
[ 105.003655] wlan0: authenticated
[ 105.003661] wlan0: associate with AP 00:01:24:f4:2d:c2
[ 105.005795] wlan0: RX AssocResp from 00:01:24:f4:2d:c2 (capab=0x1 status=0 aid=1)
[ 105.005805] wlan0: associated
[ 105.007268] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 121.013168] wlan0: no IPv6 routers present
[ 314.429528] iwl3945: Radio Frequency Kill Switch is On:
[ 314.429531] Kill switch must be turned off for wireless networking to work.
** Loaded modules:
Module Size Used by
i915 37632 2
drm 99112 3 i915
ipv6 294120 32
sbs 14336 0
sbshc 11904 1 sbs
acpi_cpufreq 14096 2
cpufreq_powersave 6272 0
cpufreq_stats 10528 0
cpufreq_userspace 9092 0
cpufreq_ondemand 13712 1
cpufreq_conservative 13320 0
freq_table 9728 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
loop 23044 0
snd_hda_intel 414296 1
arc4 6528 2
ecb 8192 2
snd_pcm_oss 46752 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_pcm 88072 2 snd_hda_intel,snd_pcm_oss
iwl3945 98036 0
joydev 17664 0
pcmcia 45080 0
snd_timer 29328 1 snd_pcm
video 27412 0
firmware_class 14976 2 iwl3945,pcmcia
mac80211 143116 1 iwl3945
snd 66888 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
yenta_socket 31500 1
output 8704 1 video
container 9600 0
soundcore 13088 1 snd
rsrc_nonstatic 16128 1 yenta_socket
psmouse 45724 0
snd_page_alloc 15120 2 snd_hda_intel,snd_pcm
intel_agp 34160 1
cfg80211 25360 1 mac80211
battery 14208 0
pcmcia_core 46500 3 pcmcia,yenta_socket,rsrc_nonstatic
wmi 13120 0
ac 9344 0
button 13856 0
iTCO_wdt 17360 0
serio_raw 11652 0
evdev 17408 6
pcspkr 7808 0
reiserfs 224384 2
sha256_generic 13952 0
aes_x86_64 12928 4
aes_generic 32424 1 aes_x86_64
cbc 8960 2
dm_crypt 20488 1
dm_mod 68536 5 dm_crypt
crypto_blkcipher 24324 5 ecb,cbc,dm_crypt
ide_cd_mod 41504 0
cdrom 39464 1 ide_cd_mod
piix 12808 0 [permanent]
sd_mod 33728 4
ide_pci_generic 9476 0 [permanent]
ide_core 138160 3 ide_cd_mod,piix,ide_pci_generic
ahci 36616 3
ata_generic 13572 0
libata 166064 2 ahci,ata_generic
scsi_mod 170360 2 sd_mod,libata
dock 16288 1 libata
tg3 102532 0
ehci_hcd 40076 0
uhci_hcd 29472 0
thermal 26656 0
processor 49388 4 acpi_cpufreq,thermal
fan 10760 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4300000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=8]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e4400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 4020 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 4040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e4500000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4504000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Memory behind bridge: e4100000-e41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=18, subordinate=18, sec-latency=0
Memory behind bridge: e4000000-e40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: e0000000-e3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 4060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 4080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 40a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e4508000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: e4200000-e42fffff
Prefetchable memory behind bridge: 0000000070000000-0000000073ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 40c0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ata_generic, ide-pci-generic, piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 1275
Region 0: I/O ports at 13f0 [size=8]
Region 1: I/O ports at 15f4 [size=4]
Region 2: I/O ports at 1370 [size=8]
Region 3: I/O ports at 1574 [size=4]
Region 4: I/O ports at 4100 [size=32]
Region 5: Memory at e4509000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 70000000-73fff000 (prefetchable)
Memory window 1: 74000000-77fff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:135c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1274
Region 0: Memory at e4100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945
18:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:30c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1273
Region 0: Memory at e4000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.25-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92b tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.25-2-amd64 recommends no packages.
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-amd64/preinst/abort-overwrite-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/prerm/removing-running-kernel-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/old-initrd-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/create-kimage-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/failed-to-move-modules-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/abort-install-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-amd64/postinst/depmod-error-2.6.25-2-amd64: false
linux-image-2.6.25-2-amd64/postinst/bootloader-test-error-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/postinst/old-system-map-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/prerm/would-invalidate-boot-loader-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/overwriting-modules-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/depmod-error-initrd-2.6.25-2-amd64: false
linux-image-2.6.25-2-amd64/postinst/old-dir-initrd-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/elilo-initrd-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/bootloader-error-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/lilo-initrd-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-amd64/preinst/initrd-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/bootloader-initrd-2.6.25-2-amd64: true
Reply to: