Bug#380693: hda: dma_timer_expiry
Package: linux-image-2.6.17-1-k7
Version: 2.6.17-4
Severity: important
Moving from 2.4 to 2.6 kernel results on errors like this:
hda: DMA timeout error
hda: dma timeout error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
hda: dma timeout error: status=0x84 { DriveStatusError BadCRC}
ide: failed opcode was: unknown
The system is frozen.
I have changed to other disk but still have DMA errors, so there is not
a hard disk issue. No errors got running a 2.4 kernel.
-- lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
(rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686
AC97 Audio Controller (rev 50)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 02)
-- lspci -n
00:00.0 0600: 1106:0305 (rev 03)
00:01.0 0604: 1106:8305
00:07.0 0601: 1106:0686 (rev 40)
00:07.1 0101: 1106:0571 (rev 06)
00:07.2 0c03: 1106:3038 (rev 1a)
00:07.3 0c03: 1106:3038 (rev 1a)
00:07.4 0680: 1106:3057 (rev 40)
00:07.5 0401: 1106:3058 (rev 50)
00:0b.0 0200: 10ec:8139 (rev 10)
01:00.0 0300: 5333:8a13 (rev 02)
-- lsmod
Module Size Used by Not tainted
usb-uhci 22928 0 (unused)
usbcore 62252 1 [usb-uhci]
via82cxxx_audio 20956 0 (unused)
ac97_codec 13108 0 [via82cxxx_audio]
uart401 6404 0 [via82cxxx_audio]
sound 56552 0 [via82cxxx_audio uart401]
soundcore 3972 4 [via82cxxx_audio sound]
ide-scsi 9904 0
scsi_mod 94628 1 [ide-scsi]
8139too 14536 1
mii 2432 0 [8139too]
crc32 2880 0 [8139too]
parport_pc 23368 0
parport 25768 0 [parport_pc]
agpgart 45412 0 (unused)
dm-mod 46904 0 (unused)
ide-cd 31008 0
cdrom 29412 0 [ide-cd]
rtc 6376 0 (autoclean)
ext3 80044 2 (autoclean)
jbd 41604 2 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
via82cxxx 10504 1 (autoclean)
ide-disk 16640 3 (autoclean)
ide-core 107192 3 (autoclean) [ide-scsi ide-cd
ide-detect via82cxxx ide-disk]
unix 14832 25 (autoclean)
-- syslog info
Aug 1 00:20:35 arkhipov kernel: PCI: Using ACPI for IRQ routing
Aug 1 00:20:35 arkhipov kernel: PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
Aug 1 00:20:35 arkhipov kernel: PCI: Bridge: 0000:00:01.0
Aug 1 00:20:35 arkhipov kernel: IO window: disabled.
Aug 1 00:20:35 arkhipov kernel: MEM window: d4000000-dbffffff
Aug 1 00:20:35 arkhipov kernel: PREFETCH window: 10000000-100fffff
Aug 1 00:20:35 arkhipov kernel: PCI: Setting latency timer of device
0000:00:01
.0 to 64
[...]
Aug 1 00:20:35 arkhipov kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Aug 1 00:20:35 arkhipov kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
Aug 1 00:20:35 arkhipov kernel: VP_IDE: IDE controller at PCI slot
0000:00:07.1
Aug 1 00:20:35 arkhipov kernel: PCI: VIA IRQ fixup for 0000:00:07.1,
from 255 to 0
Aug 1 00:20:35 arkhipov kernel: VP_IDE: chipset revision 6
Aug 1 00:20:35 arkhipov kernel: VP_IDE: not 100%% native mode: will
probe irqs later
Aug 1 00:20:35 arkhipov kernel: VP_IDE: VIA vt82c686b (rev 40) IDE
UDMA100 controller on pci0000:00:07.1
Aug 1 00:20:35 arkhipov kernel: ide0: BM-DMA at 0xd000-0xd007, BIOS
settings: hda:DMA, hdb:DMA
Aug 1 00:20:35 arkhipov kernel: ide1: BM-DMA at 0xd008-0xd00f, BIOS
settings: hdc:DMA, hdd:pio
Aug 1 00:20:35 arkhipov kernel: Probing IDE interface ide0...
Aug 1 00:20:35 arkhipov kernel: USB Universal Host Controller Interface
driverv3.0
Aug 1 00:20:35 arkhipov kernel: hda: SAMSUNG SV1296D, ATA DISK drive
Aug 1 00:20:35 arkhipov kernel: hdb: RW-201040, ATAPI CD/DVD-ROM drive
Aug 1 00:20:35 arkhipov kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 1 00:20:35 arkhipov kernel: Probing IDE interface ide1...
ug 1 00:20:35 arkhipov kernel: hdc: ST3120022A, ATA DISK drive
Aug 1 00:20:35 arkhipov kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 1 00:20:35 arkhipov kernel: ACPI: PCI Interrupt Link [LNKD] enabled
at IRQ10
Aug 1 00:20:35 arkhipov kernel: PCI: setting IRQ 10 as level-triggered
Aug 1 00:20:35 arkhipov kernel: ACPI: PCI Interrupt 0000:00:07.2[D] ->
Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.4.27-2-k7
Locale: LANG=es_ES, LC_CTYPE=es_ES (charmap=ISO-8859-1)
Versions of packages linux-image-2.6.17-1-k7 depends on:
ii initramfs-tools [linux-initra 0.60 tools for generating an initramfs
ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.17-1-k7 recommends:
pn libc6-i686 <none> (no description available)
-- debconf information excluded
Reply to: