Bug#292478: bug duplicated
On Thu, May 05, 2005 at 11:40:37AM +0200, maximilian attems wrote:
> On Thu, 05 May 2005, Blars Blarson wrote:
> > I duplicated the bug on my athalon xp 2000+ system running the latest
> > 2.6.8 k7 sid kernel 2.6.8-15.
> could you post your oops?
attached. It took a while to find the serial console howto and the
proper cables.
> i guess with the kernel-image-2.6.11 that problem disappears?
this will be tested...
--
Blars Blarson blarson@blars.org
http://www.blars.org/blars.html
With Microsoft, failure is not an option. It is a standard feature.
Debian GNU/Linux 3.1 obfuscate ttyS0
obfuscate login:
BroadcastLinux version 2.6.8-2-k7 (dilinger@mouth) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Tue Mar 22 14:14:00 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5770
DMI 2.2 present.
ACPI: RSDP (v000 VKT400 ) @ 0x000f7230
ACPI: RSDT (v001 VKT400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 VKT400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 VKT400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7240
ACPI: DSDT (v001 VKT400 AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro consol=tty0 console=ttyS0,9600n8
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1533.578 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031376k/1048512k available (1536k kernel code, 16232k reserved, 698k data, 148k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3039.23 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1532.0868 MHz.
..... host bus clock speed is 266.0585 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4484k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbeb0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbee0, dseg 0xf0000
pnp: 00:0b: ioport range 0x3f0-0x3f1 has been reserved
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:08.1[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 19 (level, low) -> IRQ 185
ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 20 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
testing the IO APIC.......................
Using vector-based indexing
.................................... done.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9
PCI: Via IRQ fixup for 0000:00:10.1, from 5 to 9
PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 9
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4484 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
initrd-tools: 0.vesafb: probe of vesafb0 failed with error -6
1.78
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 20 (level, low) -> IRQ 209
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 4R120L0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
hdc: TEAC DVD+RW DV-W58E, ATAPI CD/DVD-ROM drive
hdd: OPTORITEDVD RW DD0203, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.86 booting
devfsd: No devfs on /dev, not starting.
Activating swap.
Adding 1951856k swap on /dev/hda5. Priority:-1 extents:1
Checking root file system...
fsck 1.37 (21-Mar-2005)
/: clean, 12656/EXT3 FS on hda1, internal journal
490560 files, 220202/979933 blocks
Generic RTC Driver v1.07
System time was Sat May 7 01:15:45 UTC 2005.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Sat May 7 01:15:47 UTC 2005.
Cleaning up ifupdown...done.
Calculating module dependencies... done.
Loading modules...
ide-cd
hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
ide-disk
ide-generic
psmouse
input: GenPS/2 Genius Wheel Mouse on isa0060/serio1
sbp2
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
mice: PS/2 mouse device common for all mice
sr_mod
ts: Compaq touchscreen protocol output
i2c-viapro
i2c-isa
eeprom
w83627hf
All modules loaded.
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
Creating device-mapper devices...done.
Setting up LVM Volume Groups...
vgscan -- LVM driver/module not loaded?
vgchange -- LVM driver/module not loaded?
Checking all file systems...
fsck 1.37 (21-Mar-2005)
/home: clean, 888/3662848 files, 130933/7323624 blocks
/tmp: clean, 14/249368 files, 39578/497983 blocks
/usr: clean, 42600/488640 files, 214081/975940 blocks
/var: clean, 3003/490560 files, 181006/979933 blocks
Settkjournald starting. Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ing kernel variables ...
... done.
Mounting local filesystems...
/dev/hda9 on /home type ext3 (rw)
/dev/hda8 on /tmp type ext3 (rw)
/dev/hda6 on /usr type ext3 (rw)
/dev/hda7 on /var type ext3 (rw)
Cleaning /tmp /var/run /var/lock.
Discovering hardware: bttv snd-bt87x tulip 3c59x sata_promise ohci1394 snd-cmipci uhci-hcd ehci-hcd via-ircc via82cxxx
Loading bttv:
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 169
bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 169, latency: 32, mmio: 0xe0161000
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
bttv: readee error
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
Loading snd-bt87x:
ACPI: PCI interrupt 0000:00:08.1[A] -> GSI 16 (level, low) -> IRQ 169
Loading tulip:
Linux Tulip driver version 1.1.13 (May 11, 2002)
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 177
tulip0: MII transceiver #1 config 3100 status 7829 advertising 01e1.
eth0: Lite-On 82c168 PNIC rev 32 at 0xa000, 00:C0:F0:3E:E6:BD, IRQ 177.
Loading 3c59x:
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 185
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xa400. Vers LK1.1.19
Loading sata_promise:
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 193
ata1: SATA max UDMA/133 cmd 0xF8A72200 ctl 0xF8A72238 bmdma 0x0 irq 193
ata2: SATA max UDMA/133 cmd 0xF8A72280 ctl 0xF8A722B8 bmdma 0x0 irq 193
ata1: no device found (phy stat 00000000)
scsi0 : sata_promise
ata2: no device found (phy stat 00000000)
scsi1 : sata_promise
Loading ohci1394:
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 18 (level, low) -> IRQ 177
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177] MMIO=[e0165000-e01657ff] Max Packet=[2048]
Loading snd-cmipci:
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 19 (level, low) -> IRQ 185
Loading uhci-hcd:
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 201, io base 0000bc00
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 201
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usb 1-2: new full speed USB device using address 2
uhci_hcd 0000:00:10.1: irq 201, io base 0000c000
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 201
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
Vendor: ATAPI Model: CD-R/RW 32X10 Rev: W.DA
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
uhci_hcd 0000:00:10.2: irq 201, io base 0000c400
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 5
Loading ehci-hcd:
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 201
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: irq 201, pci mem f8bcf000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb 1-2: USB disconnect, address 2
scsi: Device offlined - not ready after error recovery: host 2 channel 0 id 0 lun 0
sr 2:0:0:0: Illegal state transition cancel->offline
Badness in scsi_device_set_state at drivers/scsi/scsi_lib.c:1643
[<f89c6c46>] scsi_device_set_state+0xc6/0x120 [scsi_mod]
[<f89c4594>] scsi_eh_offline_sdevs+0x64/0x80 [scsi_mod]
[<f89c4bbc>] scsi_unjam_host+0xcc/0x200 [scsi_mod]
[<c0118aa0>] default_wake_function+0x0/0x20
[<f89c4df3>] scsi_error_handler+0x103/0x1c0 [scsi_mod]
[<f89c4cf0>] scsi_error_handler+0x0/0x1c0 [scsi_mod]
[<c0104291>] kernel_thread_helper+0x5/0x14
Unable to handle kernel NULL pointer dereference at virtual address 00000013
printing eip:
c02016f3
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: ehci_hcd sg usb_storage eth1394 uhci_hcd usbcore snd_cmipci snd_opl3_lib snd_hwdep gameport snd_mpu401_uart snd_rawmidi snd_seq_device ohci1394 sata_promise libata 3c59x tulip snd_bt87x snd_pcm snd_timer snd snd_page_alloc bttv video_buf i2c_algo_bit v4l2_common btcx_risc videodev soundcore dm_mod capability commoncap w83627hf eeprom i2c_sensor i2c_isa i2c_viapro i2c_core tsdev sr_mod mousedev evdev sbp2 scsi_mod ieee1394 psmouse ide_cd cdrom genrtc ext3 jbd mbcache ide_generic via82cxxx ide_disk ide_core unix font vesafb cfbcopyarea cfbimgblt cfbfillrect
CPU: 0
EIP: 0060:[<c02016f3>] Not tainted
EFLAGS: 00010083 (2.6.8-2-k7)
EIP is at as_requeue_request+0x83/0xe0
eax: 00000013 ebx: 00000000 ecx: c1b8802c edx: f7fe5cb0
esi: f7fe5cb0 edi: f7b8d560 ebp: 00000202 esp: f79d7ee0
ds: 007b es: 007b ss: 0068
Process scsi_eh_2 (pid: 1339, threadinfo=f79d6000 task=f79c3200)
Stack: c012c36e 00000000 00000000 c0106dcd f7fe5cb0 f79ad400 c1b8802c c01f8f26
c1b8802c f7fe5cb0 f7fe5cb0 f79ad400 c01fb7cc c1b8802c f7fe5cb0 f787ba48
00000286 f787b9e0 f79ad400 f7fdd600 00001057 f89c51c9 c1b8802c f7fe5cb0
Call Trace:
[<c012c36e>] __kernel_text_address+0x2e/0x40
[<c0106dcd>] print_context_stack+0x2d/0x70
[<c01f8f26>] elv_requeue_request+0x26/0x50
[<c01fb7cc>] blk_insert_request+0xdc/0xe0
[<f89c51c9>] scsi_queue_insert+0x89/0xd0 [scsi_mod]
[<f89c4a71>] scsi_eh_flush_done_q+0x71/0xf0 [scsi_mod]
[<f89c4b88>] scsi_unjam_host+0x98/0x200 [scsi_mod]
[<c0118aa0>] default_wake_function+0x0/0x20
[<f89c4df3>] scsi_error_handler+0x103/0x1c0 [scsi_mod]
[<f89c4cf0>] scsi_error_handler+0x0/0x1c0 [scsi_mod]
[<c0104291>] kernel_thread_helper+0x5/0x14
Code: 8b 10 89 72 04 89 16 89 46 04 89 30 8b 74 24 14 8b 5c 24 10
<6>note: scsi_eh_2[1339] exited with preempt_count 1
Reply to: