Bug#302806: kernel-image-2.6.10-1-k7: ieee1394 interface rejects mass storage device

[Diab Jerius <jerius@comcast.net>]

Package: kernel-image-2.6.10-1-k7
Version: 2.6.10-6
Severity: important


Hardware: 
  Rosewill RX30-U2FA USB2.0/1.1+1394a external enclosure. 
	Oxford 911+Cypress AT2 chipset
  Seagate ST3300831A drive
  Zonet ZUC2400 USB2.0+Firewire PCI card
  ABIT KT7 Mainboard

Upon plugging the Firewire side of the drive into the Firewire port on
the PCI card, the following messages were logged.


ieee1394: Node added: ID:BUS[0-00:1023]  GUID[0001d200e08c07a6]
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
  Vendor: ST330083  Model: 1A                Rev: 3.01
  Type:   Direct-Access                      ANSI SCSI revision: 06
ieee1394: Error parsing configrom for node 0-00:1023
ieee1394: Node suspended: ID:BUS[0-00:1023]  GUID[0001d200e08c07a6]
ieee1394: sbp2: aborting sbp2 command
Test Unit Ready 00 00 00 00 00 
ieee1394: sbp2: hpsb_node_write failed.

ieee1394: sbp2: Bus reset in progress - rejecting command
ieee1394: sbp2: reset requested
ieee1394: sbp2: Generating sbp2 fetch agent reset
ieee1394: sbp2: hpsb_node_write failed.

ieee1394: sbp2: Bus reset in progress - rejecting command
ieee1394: sbp2: reset requested
ieee1394: sbp2: Generating sbp2 fetch agent reset
ieee1394: sbp2: hpsb_node_write failed.

ieee1394: sbp2: Bus reset in progress - rejecting command
scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
sd 0:0:0:0: Illegal state transition cancel->offline
Badness in scsi_device_set_state at drivers/scsi/scsi_lib.c:1718
 [<e8ddcf96>] scsi_device_set_state+0xc6/0x120 [scsi_mod]
 [<e8dda7d4>] scsi_eh_offline_sdevs+0x64/0x80 [scsi_mod]
 [<e8ddad1c>] scsi_unjam_host+0xcc/0x200 [scsi_mod]
 [<c0116320>] default_wake_function+0x0/0x20
 [<e8ddaf1f>] scsi_error_handler+0xcf/0x170 [scsi_mod]
 [<e8ddae50>] scsi_error_handler+0x0/0x170 [scsi_mod]
 [<c01012b1>] kernel_thread_helper+0x5/0x14

Needless to say, the drive isn't working very well under these
circumstances.

Thanks!

Diab Jerius

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-1-k7
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages kernel-image-2.6.10-1-k7 depends on:
ii  coreutils [fileutils]         5.2.1-2    The GNU core utilities
ii  fileutils                     5.2.1-2    The GNU file management utilities 
ii  initrd-tools                  0.1.77     tools to create initrd image for p
ii  module-init-tools             3.2-pre1-2 tools for managing Linux kernel mo

-- no debconf information