Bug#270321: kernel-image-2.6.8-powerpc: PReP boot failure
Package: kernel-image-2.6.8-powerpc
Version: 2.6.8-3
Severity: important
Steps to reproduce:
1. install kernel-image-2.6.8-powerpc
2. run mkvmlinuz with "do_initrd = Yes" in kernel-img.cnf
3. boot the resulting vmlinuz-2.6.8-powerpc on PReP
Results:
loaded at: 00480410 00A51004
relocated to: 00800000 00DD0BF4
zimage at: 00805A40 0093743F
initrd at: 00938000 00DC674E
avail ram: 00400000 00800000
Linux/PPC load: console=ttyS0,9600 console=tty0
Uncompressing Linux...done.
Now booting the kernel
Total memory = 64MB; using 128kB for hash table (at c02e0000)
Linux version 2.6.8-powerpc (jens@yorick) (gcc version 3.3.4 (Debian
1:3.3.4-9)) #1 Fri Aug 27 18:02:26 CEST 2004
PReP architecture
IBM planar ID: 000000f3
Built 1 zonelists
Kernel command line: console=ttyS0,9600 console=tty0
PID hash table entries: 512 (order 9: 4096 bytes)
time_init: decrementer frequency = 16.666666 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 57056k available (1720k kernel code, 1056k data, 164k init, 0k
highmem)
Calibrating delay loop... 265.21 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
time_init: decrementer frequency = 16.666666 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 57056k available (1720k kernel code, 1056k data, 164k init, 0k
highmem)
Calibrating delay loop... 265.21 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 4665k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
Setting PCI interrupts for a "IBM 7248, PowerSeries 830/850 (Carolina)"
PCI: Cannot allocate resource region 0 of device 0000:00:0c.0
Thermal assist unit not available
audit: initializing netlink socket (disabled)
audit(1094498789.599:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: Macintosh mouse button emulation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 164k init 60k pmac 4k chrp 8k openfirmware
NET: Registered protocol family 1
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds..
FYI:
ii mkvmlinuz 8 create a kernel to boot a PowerPC machine fr
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.9-rc1
Locale: LANG=C, LC_CTYPE=C
Versions of packages kernel-image-2.6.8-powerpc depends on:
ii initrd-tools 0.1.74 tools to create initrd image for p
ii module-init-tools 3.1-pre5-6 tools for managing Linux kernel mo
-- no debconf information
Reply to: