[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Visor does't sync

On 2006-11-26, Marc Bantle <b@ntle.de> wrote:

known bug. Pick the kdepim currently in unstable - it should fix it

/Sune - who have been a bit involved in fixing that one.

> This is a multi-part message in MIME format.
> --------------010704020208080103070409
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> Content-Transfer-Encoding: 7bit
>
> Hi there,
>
> some weeks ago my Handspring Visor stopped syncing with KPilot. I assume 
> it happend, when I switched to newer udev which kicked out hotplug from 
> my Debian testing. I hoped the next update would fix it, but it didn't 
> up to today.
>
> Whenever I press the hotsync-button Kpilot shows 30% of 
> hotsync-completion and the Visor will show a message like "The 
> connection between your handheld computer and the desktop was lost. Some 
> of your data was NOT backed up ...". Non of the conduits are being run.
>
>  From syslog I can see, that visor is being disconnected right after 
> connection is successfully processed. But I can't figure why?
>
> I use
> - kdepim/kpilot 4:3.5.5.dfsg.1-1
> - udev 0.100-2.3
> - hotplug not installed
>
> The syslog with udev_log="debug" is attached. Also kpilot-log.
>
>
> Any ideas?
>
> Marc
>
>
> --------------010704020208080103070409
> Content-Type: text/plain;
>  name="syslog.kpilot.txt"
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline;
>  filename="syslog.kpilot.txt"
>
> Nov 26 17:30:13 localhost kernel: hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0002
> Nov 26 17:30:13 localhost kernel: ehci_hcd 0000:00:02.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
> Nov 26 17:30:13 localhost kernel: hub 3-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
> Nov 26 17:30:13 localhost kernel: hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
> Nov 26 17:30:13 localhost kernel: ehci_hcd 0000:00:02.2: port 1 full speed --> companion
> Nov 26 17:30:13 localhost kernel: ehci_hcd 0000:00:02.2: GetStatus port 1 status 003001 POWER OWNER sig=se0 CONNECT
> Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
> Nov 26 17:30:13 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
> Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
> Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
> Nov 26 17:30:13 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
> Nov 26 17:30:13 localhost kernel: usb 1-1: new full speed USB device using ohci_hcd and address 5
> Nov 26 17:30:13 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
> Nov 26 17:30:13 localhost kernel: usb 1-1: ep0 maxpacket = 16
> Nov 26 17:30:13 localhost kernel: usb 1-1: default language 0x0409
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1734 forked, pid [5594], 'add' 'usb', 0 seconds old
> Nov 26 17:30:13 localhost kernel: usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
> Nov 26 17:30:13 localhost kernel: usb 1-1: Product: Handspring Visor
> Nov 26 17:30:13 localhost kernel: usb 1-1: Manufacturer: Handspring Inc
> Nov 26 17:30:13 localhost kernel: usb 1-1: uevent
> Nov 26 17:30:13 localhost kernel: usb 1-1: configuration #1 chosen from 1 choice
> Nov 26 17:30:13 localhost udevd-event[5594]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/bus' appeared after 0 loops
> Nov 26 17:30:13 localhost udevd-event[5594]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0)
> Nov 26 17:30:13 localhost kernel: usb 1-1:1.0: uevent
> Nov 26 17:30:13 localhost kernel: drivers/usb/core/inode.c: creating file '005'
> Nov 26 17:30:13 localhost kernel: hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
> Nov 26 17:30:13 localhost udevd-event[5594]: pass_env_to_socket: passed 202 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5594]: udev_event_run: seq 1734 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1734, pid [5594] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1735 forked, pid [5595], 'add' 'usb', 0 seconds old
> Nov 26 17:30:13 localhost udevd-event[5595]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/bus' appeared after 0 loops
> Nov 26 17:30:13 localhost udevd-event[5595]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost udevd-event[5595]: run_program: '/sbin/modprobe usb:v082Dp0100d0100dc00dsc00dp00icFFisc00ip00'
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1737 forked, pid [5597], 'add' 'module', 0 seconds old
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1738 forked, pid [5598], 'add' 'drivers', 0 seconds old
> Nov 26 17:30:13 localhost kernel: usbcore: registered new driver usbserial
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1739 forked, pid [5599], 'add' 'drivers', 0 seconds old
> Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1740 forked, pid [5600], 'add' 'drivers', 0 seconds old
> Nov 26 17:30:13 localhost kernel: usbserial_generic 1-1:1.0: usb_probe_interface
> Nov 26 17:30:13 localhost kernel: usbserial_generic 1-1:1.0: usb_probe_interface - got id
> Nov 26 17:30:13 localhost kernel: usbcore: registered new driver usbserial_generic
> Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
> Nov 26 17:30:13 localhost udevd-event[5597]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost udevd-event[5597]: pass_env_to_socket: passed 113 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5597]: udev_event_run: seq 1737 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1737, pid [5597] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost udevd-event[5598]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost udevd-event[5598]: pass_env_to_socket: passed 132 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5598]: udev_event_run: seq 1738 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1738, pid [5598] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost udevd-event[5599]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost udevd-event[5599]: pass_env_to_socket: passed 142 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5599]: udev_event_run: seq 1739 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1739, pid [5599] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost udevd-event[5600]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost udevd-event[5600]: pass_env_to_socket: passed 148 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5600]: udev_event_run: seq 1740 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1740, pid [5600] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1741 forked, pid [5601], 'add' 'module', 0 seconds old
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1742 forked, pid [5602], 'add' 'drivers', 0 seconds old
> Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1743 forked, pid [5603], 'add' 'drivers', 0 seconds old
> Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1744 forked, pid [5604], 'add' 'drivers', 0 seconds old
> Nov 26 17:30:13 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1745 forked, pid [5605], 'add' 'drivers', 0 seconds old
> Nov 26 17:30:13 localhost kernel: visor 1-1:1.0: usb_probe_interface
> Nov 26 17:30:13 localhost kernel: visor 1-1:1.0: usb_probe_interface - got id
> Nov 26 17:30:13 localhost udevd-event[5601]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost udevd-event[5601]: pass_env_to_socket: passed 105 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5601]: udev_event_run: seq 1741 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1741, pid [5601] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost udevd-event[5602]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost udevd-event[5602]: pass_env_to_socket: passed 138 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5602]: udev_event_run: seq 1742 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1742, pid [5602] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost udevd-event[5603]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost udevd-event[5603]: pass_env_to_socket: passed 144 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5603]: udev_event_run: seq 1743 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1743, pid [5603] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost udevd-event[5604]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost udevd-event[5604]: pass_env_to_socket: passed 140 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5604]: udev_event_run: seq 1744 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1744, pid [5604] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost udevd-event[5605]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:13 localhost udevd-event[5605]: pass_env_to_socket: passed 124 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5605]: udev_event_run: seq 1745 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1745, pid [5605] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS: port 1, is for Generic use
> Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS: port 2, is for HotSync use
> Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS: Number of ports: 2
> Nov 26 17:30:13 localhost kernel: visor 1-1:1.0: Handspring Visor / Palm OS converter detected
> Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS converter now attached to ttyUSB0
> Nov 26 17:30:13 localhost kernel: usb 1-1: Handspring Visor / Palm OS converter now attached to ttyUSB1
> Nov 26 17:30:13 localhost kernel: usbcore: registered new driver visor
> Nov 26 17:30:13 localhost kernel: drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
> Nov 26 17:30:13 localhost udevd-event[5595]: run_program: '/sbin/modprobe' returned with status 0
> Nov 26 17:30:13 localhost udevd-event[5595]: pass_env_to_socket: passed 322 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:13 localhost udevd-event[5595]: udev_event_run: seq 1735 finished
> Nov 26 17:30:13 localhost udevd[5584]: udev_done: seq 1735, pid [5595] exit with 0, 0 seconds old
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1736 forked, pid [5606], 'add' 'usb_device', 0 seconds old
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1746 forked, pid [5607], 'add' 'usb-serial', 0 seconds old
> Nov 26 17:30:13 localhost udevd[5584]: udev_event_run: seq 1748 forked, pid [5608], 'add' 'usb-serial', 0 seconds old
> Nov 26 17:30:13 localhost udevd-event[5606]: run_program: '/bin/sh -c 'K=usbdev1.5; K=${K#usbdev}; printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''
> Nov 26 17:30:13 localhost udevd-event[5606]: run_program: '/bin/sh' (stdout) 'bus/usb/001/005'
> Nov 26 17:30:13 localhost udevd-event[5606]: run_program: '/bin/sh' returned with status 0
> Nov 26 17:30:13 localhost udevd-event[5606]: udev_rules_get_name: rule applied, 'usbdev1.5' becomes 'bus/usb/001/005'
> Nov 26 17:30:13 localhost udevd-event[5606]: udev_db_get_device: no db file to read /dev/.udev/db/class@usb_device@usbdev1.5: No such file or directory
> Nov 26 17:30:13 localhost udevd-event[5606]: udev_node_add: creating device node '/dev/bus/usb/001/005', major = '189', minor = '4', mode = '0664', uid = '0', gid = '0'
> Nov 26 17:30:13 localhost udevd-event[5606]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:14 localhost udevd-event[5606]: pass_env_to_socket: passed 271 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:14 localhost udevd-event[5606]: udev_event_run: seq 1736 finished
> Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1736, pid [5606] exit with 0, 1 seconds old
> Nov 26 17:30:14 localhost udevd-event[5607]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/ttyUSB0/bus' appeared after 0 loops
> Nov 26 17:30:14 localhost udevd-event[5607]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:14 localhost udevd-event[5607]: pass_env_to_socket: passed 219 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:14 localhost udevd-event[5607]: udev_event_run: seq 1746 finished
> Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1746, pid [5607] exit with 0, 1 seconds old
> Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1747 forked, pid [5610], 'add' 'tty', 1 seconds old
> Nov 26 17:30:14 localhost udevd-event[5608]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/ttyUSB1/bus' appeared after 0 loops
> Nov 26 17:30:14 localhost udevd-event[5608]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:14 localhost udevd-event[5608]: pass_env_to_socket: passed 219 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:14 localhost udevd-event[5608]: udev_event_run: seq 1748 finished
> Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1748, pid [5608] exit with 0, 1 seconds old
> Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1749 forked, pid [5611], 'add' 'tty', 1 seconds old
> Nov 26 17:30:14 localhost udevd-event[5610]: udev_rules_get_name: add symlink 'pilot'
> Nov 26 17:30:14 localhost udevd-event[5610]: udev_rules_get_name: no node name set, will use kernel name 'ttyUSB0'
> Nov 26 17:30:14 localhost udevd-event[5610]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@ttyUSB0: No such file or directory
> Nov 26 17:30:14 localhost udevd-event[5610]: udev_node_add: creating device node '/dev/ttyUSB0', major = '188', minor = '0', mode = '0660', uid = '0', gid = '20'
> Nov 26 17:30:14 localhost udevd-event[5610]: udev_node_add: creating symlink '/dev/pilot' to 'ttyUSB0'
> Nov 26 17:30:14 localhost udevd-event[5610]: udev_node_symlink: creating symlink '/dev/pilot' to 'ttyUSB0'
> Nov 26 17:30:14 localhost udevd-event[5610]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:14 localhost udevd-event[5610]: pass_env_to_socket: passed 283 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:14 localhost udevd-event[5610]: udev_event_run: seq 1747 finished
> Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1747, pid [5610] exit with 0, 1 seconds old
> Nov 26 17:30:14 localhost udevd-event[5611]: udev_rules_get_name: add symlink 'pilot'
> Nov 26 17:30:14 localhost udevd-event[5611]: udev_rules_get_name: no node name set, will use kernel name 'ttyUSB1'
> Nov 26 17:30:14 localhost udevd-event[5611]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@ttyUSB1: No such file or directory
> Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_add: creating device node '/dev/ttyUSB1', major = '188', minor = '1', mode = '0660', uid = '0', gid = '20'
> Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_add: creating symlink '/dev/pilot' to 'ttyUSB1'
> Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_symlink: link '/dev/pilot' points to different target 'ttyUSB0', delete it
> Nov 26 17:30:14 localhost udevd-event[5611]: udev_node_symlink: creating symlink '/dev/pilot' to 'ttyUSB1'
> Nov 26 17:30:14 localhost udevd-event[5611]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:14 localhost udevd-event[5611]: pass_env_to_socket: passed 283 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:14 localhost udevd-event[5611]: udev_event_run: seq 1749 finished
> Nov 26 17:30:14 localhost udevd[5584]: udev_done: seq 1749, pid [5611] exit with 0, 1 seconds old
> Nov 26 17:30:14 localhost kernel: ohci_hcd 0000:00:02.0: urb f4db6b40 path 1 ep2in 5e160000 cc 5 --> status -110
> Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1750 forked, pid [5612], 'remove' 'usb', 0 seconds old
> Nov 26 17:30:14 localhost udevd[5584]: udev_event_run: seq 1751 forked, pid [5613], 'remove' 'usb_device', 0 seconds old
> Nov 26 17:30:14 localhost kernel: hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
> Nov 26 17:30:14 localhost kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00030100 PESC CSC PPS
> Nov 26 17:30:14 localhost kernel: hub 1-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
> Nov 26 17:30:14 localhost kernel: usb 1-1: USB disconnect, address 5
> Nov 26 17:30:14 localhost kernel: usb 1-1: usb_disable_device nuking all URBs
> Nov 26 17:30:14 localhost kernel: usb 1-1: unregistering interface 1-1:1.0
> Nov 26 17:30:14 localhost kernel: visor 1-1:1.0: device disconnected
> Nov 26 17:30:14 localhost kernel: usb 1-1:1.0: uevent
> Nov 26 17:30:14 localhost kernel: usb 1-1: unregistering device
> Nov 26 17:30:14 localhost kernel: usb 1-1: uevent
> Nov 26 17:30:14 localhost kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
> Nov 26 17:30:16 localhost udevd-event[5612]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:16 localhost udevd-event[5612]: pass_env_to_socket: passed 328 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:16 localhost udevd-event[5612]: udev_event_run: seq 1750 finished
> Nov 26 17:30:16 localhost udevd[5584]: udev_done: seq 1750, pid [5612] exit with 0, 2 seconds old
> Nov 26 17:30:16 localhost udevd[5584]: udev_event_run: seq 1752 forked, pid [5614], 'remove' 'usb', 2 seconds old
> Nov 26 17:30:16 localhost udevd-event[5613]: udev_db_get_device: found a symlink as db file
> Nov 26 17:30:16 localhost udevd-event[5613]: udev_node_remove: removing device node '/dev/bus/usb/001/005'
> Nov 26 17:30:16 localhost udevd-event[5613]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:16 localhost udevd-event[5613]: pass_env_to_socket: passed 277 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:16 localhost udevd-event[5613]: udev_event_run: seq 1751 finished
> Nov 26 17:30:16 localhost udevd[5584]: udev_done: seq 1751, pid [5613] exit with 0, 2 seconds old
> Nov 26 17:30:16 localhost udevd-event[5614]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
> Nov 26 17:30:16 localhost udevd-event[5614]: pass_env_to_socket: passed 179 bytes to socket '/org/freedesktop/hal/udev_event',
> Nov 26 17:30:16 localhost udevd-event[5614]: udev_event_run: seq 1752 finished
> Nov 26 17:30:16 localhost udevd[5584]: udev_done: seq 1752, pid [5614] exit with 0, 2 seconds old
>
>
> --------------010704020208080103070409
> Content-Type: text/html;
>  name="kpilot.log"
> Content-Disposition: inline;
>  filename="kpilot.log"
> Content-Transfer-Encoding: quoted-printable
>
><b>Version:</b> KPilot 4.6.0 (blivit)
><b>Version:</b> pilot-link 0.12.1
><b>Version:</b> KDE 3.5.5
><b>Version:</b> Qt 3.3.7
>
><qt><B>HotSync-Protokoll</B></qt>
>
><b>17:51:02</b> KPilot D=C3=A4mon wird gestartet ...
><b>17:51:03</b> Der Status des D=C3=A4mons ist "l=C3=A4uft nicht"
><b>17:51:03</b> <i>Pilot-Ger=C3=A4t /dev/ttyUSB1 existiert nicht. Das Ger=
>=C3=A4t ist wahrscheinlich ein USB-Ger=C3=A4t und erscheint erst w=C3=A4h=
> rend einem Abgleich.</i>
><b>17:51:44</b> Ger=C3=A4teverbindung hergestellt.
>
>
> --------------010704020208080103070409--
>
>
Reply to: