Re: Configurazione "nuovo" PC

[Mattia <mattia@p2pforum.it>]

Il giorno 14 novembre 2008 12.17, Fi3rizi0 <fi3rizi0@gmail.com> ha scritto:
> $ dmesg | grep err
> da qualcosa?
Ecco:

[    0.169867] ACPI: Using PIC for interrupt routing
[    0.182870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.188381] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.189276] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.190160] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.191041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    3.112548] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[    3.112638] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] ->
GSI 5 (level, low) -> IRQ 5
[    3.218317] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    3.218407] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] ->
GSI 11 (level, low) -> IRQ 11
[    3.321381] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    3.321460] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] ->
GSI 11 (level, low) -> IRQ 11
[    3.849746] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[    3.849838] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] ->
GSI 5 (level, low) -> IRQ 5
[    3.929348] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[    5.654145] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] ->
GSI 5 (level, low) -> IRQ 5
[   11.993956] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] ->
GSI 11 (level, low) -> IRQ 11
[   12.020967] tveeprom 0-0050: Huh, no eeprom present (err=-121)?
[   14.912795] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] ->
GSI 11 (level, low) -> IRQ 11
[   88.642603] lp0: using parport0 (interrupt-driven).
[   96.654586] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] ->
GSI 5 (level, low) -> IRQ 5

> potrebbe essere un problema della scheda madre, puoi fare dei test con un altro os?

No, però posso farlo su un'altra scheda madre molto simile e di cui
sono certo del funzionamento

> cosa c'è scritto in xorg.conf?

Questo è il mio:

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen" 0 0
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        Option          "AIGLX" "off"
EndSection

Section "Files"
        FontPath        "/usr/local/share/fonts"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "it"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device" "/dev/input/mice"
        Option          "Protocol" "ImPS/2"
        Option          "Emulate3Buttons" "true"
EndSection

Section "Monitor"
        Identifier      "Configured Monitor"
EndSection

Section "Device"
        Identifier      "Nvidia GeForce4 MX 440 AGP 8X"
        Driver          "nvidia"
        Option          "NvAGP" "0"
        BusID           "PCI:1:0:0"
#       Option          "UseFBDev"              "true"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "Nvidia GeForce4 MX 440 AGP 8X"
        Monitor         "Configured Monitor"
        DefaultDepth    24
        Subsection "Display"
                Modes   "1280x1024"
        EndSubSection
EndSection

Section "DRI"
        Mode    0666
Endsection

Section "Extensions"
        Option  "Composite" "Disable"
EndSection