[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: X11 crash

From: francesco <francesco.banconi@tin.it>
To: debian-italian@lists.debian.org
Subject: Re: X11 crash
Date: Sat, 5 Apr 2003 16:27:38 +0200

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> 2) se provo a far partire xine, si blocca tutto il sistema, e sono
> costretto a riavviare col tasto reset, il che comporta 60 minuti di check 
> delle partizioni.......
> 3) idem per mplayer, quindi non e' colpa della configurazione di xine... o 
> sbaglio?!?

Probabilmente non sbagli, dpkg-reconfigure xserver-xfree86 (controlla anche
che sia installato il pacchetto xlibmesa3).
Fatto, ma e' stato inutile. Same as before. Ho letto da qualche parte che per la mia Voodoo3 3000 devo usare il driver tdfx (io usavo vesa), ma mettendoci tdfx X11 non parte, dendomi questo bell'errorone: 

########INIZIO########
warning: process set to nice value 0 instead of -10 as requested

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Apr  7 22:05:42 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Sony CPD-100ES"
(**) |   |-->Device "3Dfx Voodoo3 3000"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "it"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" 
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI: (0:11:0) unknown vendor (0x14f1) unknown chipset (0x8800) rev 3, Mem @ 0xea000000/24 (--) PCI:*(1:0:0) 3dfx Interactive Voodoo3 rev 1, Mem @ 0xe4000000/25, 0xe8000000/25, I/O @ 0xc000/8 
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
	3dfx Voodoo3, 3dfx Voodoo5
(--) Assigning device section with no busID to primary device
(--) Chipset 3dfx Voodoo3 found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) TDFX(0): Softbooting the board (through the int10 interface).
(II) TDFX(0): Primary V_BIOS segment is: 0xc000
(II) TDFX(0): Softbooting the board succeeded.
(**) TDFX(0): Depth 24, (--) framebuffer bpp 32
(==) TDFX(0): RGB weight 888
(==) TDFX(0): Default visual is TrueColor
(--) TDFX(0): Chipset: "3dfx Voodoo3"
(--) TDFX(0): Linear framebuffer at 0xE8000000
(--) TDFX(0): MMIO registers at addr 0xE4000000
(--) TDFX(0): PIO registers at addr 0xC000
(II) TDFX(0): DRAMINIT1 read 0x40202031, programming 0x40202031 (not Banshee) 
(**) TDFX(0): VideoRAM: 16 kByte Mapping 32 kByte
(==) TDFX(0): Using gamma correction (1.0, 1.0, 1.0)
(II) TDFX(0): Sony CPD-100ES: Using hsync range of 30.00-70.00 kHz
(II) TDFX(0): Sony CPD-100ES: Using vrefresh range of 50.00-120.00 Hz
(II) TDFX(0): Clock range:  12.00 to 350.00 MHz
(II) TDFX(0): Not using default mode "640x350" (insufficient memory for mode) (II) TDFX(0): Not using default mode "640x400" (insufficient memory for mode) (II) TDFX(0): Not using default mode "720x400" (insufficient memory for mode) (II) TDFX(0): Not using default mode "640x480" (insufficient memory for mode) (II) TDFX(0): Not using default mode "640x480" (insufficient memory for mode) (II) TDFX(0): Not using default mode "640x480" (insufficient memory for mode) (II) TDFX(0): Not using default mode "640x480" (insufficient memory for mode) (II) TDFX(0): Not using default mode "800x600" (insufficient memory for mode) (II) TDFX(0): Not using default mode "800x600" (insufficient memory for mode) (II) TDFX(0): Not using default mode "800x600" (insufficient memory for mode) (II) TDFX(0): Not using default mode "800x600" (insufficient memory for mode) (II) TDFX(0): Not using default mode "800x600" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1024x768" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1024x768" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1024x768" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1024x768" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1024x768" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1152x864" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1280x960" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1280x960" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) TDFX(0): Not using default mode "1400x1050" (insufficient memory for mode) 
(WW) TDFX(0): Mode pool is empty
(EE) TDFX(0): No valid modes found
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.

XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
     after 0 requests (0 known processed) with 0 events remaining.
########FINE########
Riscrivendo solo "vesa" al posta di "tdfx" nel file di config, va tutto a posto. 

Quindi?


Questo e' un comportamento normale, prima di diventare root dai il comando
xhost + per disabilitare il controllo per l'accesso dei client.


Grazie :)

Guldo

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus
Reply to: