X e refresh (con logs)
Ciao ragazzi.
La Debian nuova (Sarge) è up&running e quasi tutto funzica, a parte il refresh
del monitor.
Sebbene la versione di X sia la stessa della MDK 8.2, con MDK arrivo a una
risoluzioni di 1024x768@85, con Debian di 1024x768@75.
Per configurare il monitor, ho inserito, come da copione SOPRA la sezione
debconf di XF86Config-4 la stessa sezione monitor che uso sotto MDK, con le
modelines ottenute direttamente dall'assistenza Samsung, ma inutilmente.
Aggiungo successivamente il log di X.
Grazie mille in anticipo per l'aiuto.
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Samsung SyncMaster 755DXF"
VendorName "Samsung"
ModelName "755DXF"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-85
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# ModeLine "640x480" 25.175 640 656 752 800 480 490 492 525 -hsync -vsync
# ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# ModeLine "640x480" 36 640 696 752 832 480 481 484 509 -hsync -vsync
# ModeLine "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync
# ModeLine "1024x768" 65 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# ModeLine "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
+vsync
# ModeLine "1280x1024" 135 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
+vsync
# ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync
+vsync
# ModeLine "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +hsync
+vsync
EndSection
Segue la parte (penso) rilevante di XFree86.0.log
(II) R128(0): SyncMaster 755DFX: Using hsync range of 30.00-60.00 kHz
(II) R128(0): SyncMaster 755DFX: Using vrefresh range of 50.00-75.00 Hz
(II) R128(0): Clock range: 12.50 to 400.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
<cut>
(II) R128(0): Not using default mode "800x512" (hsync out of range)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) R128(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772
800 +hsync +vsync
Reply to: