Problemi con TA ISDN target world PCI 1000
Ciao a tutti,
vi scrivo perche' ho dei problemi nell'utilizzare la scheda target world 1000
PCI ... chipset HFC-S PCI A 2BDSO ISDN CCD 9949E
(inoltre sulla scheda si trova un jumper JP1 R30, qualcuno sa a cosa serve?)
Ho comprato la scheda in questione solo perche' sul sito del produttore
(www.mavian.com) e' documentato il completo supporto per linux, io uso linux
distribuzione debian 2.2 potato.
Ho comilato il kernel 2.2.15 mettendo:
sotto "Networking options" "TCP/IP" networking attivato
sotto "Network device support" come modulo "PPP"
sotto "ISDN subsystem" "ISDN support", sempre come modulo;
e ho attivato anche le opzioni:
"synchronous PPP"
"VJ-compression"
"generic MP (RFC 1717)"
"audio support"
sempre sotto "ISDN subsystem" ho attivato il modulo "HiSax
SiemensChipset, con le opzioni "EURO/DSS1" e "HFC-S+ HFC-SP HFC-PCMCIA
cards" (ho anche provato usanto tutti e tre i driver per il chip HFC), quindi
anche "HFC PCI-Bus cards" e "HFC-S based cards".
Il problema e' che il sistema non vede la scheda in questione, vi allego qui'
sotto l'output di dmesg:
-------------------------------------------------------------------------
Linux version 2.2.15 (root@casa) (gcc version 2.95.2 20000313 (Debian
GNU/Linux)) #10 Mon Jul 3 13:48:50 CEST 2000
Detected 501144975 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 999.42 BogoMIPS
Memory: 257728k/262080k available (1044k kernel code, 416k reserved, 2824k
data, 68k init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
CPU: Intel Pentium III (Katmai) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xf08b0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
matroxfb: Matrox unknown G400 (AGP) detected
matroxfb: MTRR's turned on
matroxfb: 640x480x8bpp (virtual: 640x26208)
matroxfb: framebuffer at 0xCE000000, mapped to 0xd0005000, size 16777216
Console: switching to colour frame buffer device 80x30
fb0: MATROX VGA frame buffer device
mdacon: MDA card not detected.
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
ISDN subsystem Rev: 1.100/1.84/1.114/1.63/1.17/1.4
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.3e (kernel)
HiSax: Layer1 Revision 2.37
HiSax: Layer2 Revision 2.20
HiSax: TeiMgr Revision 2.13
HiSax: Layer3 Revision 2.10
HiSax: LinkLayer Revision 2.40
HiSax: Approval certification valid
HiSax: Approved with ELSA Quickstep series cards
HiSax: Approval registration numbers:
HiSax: German D133361J CETECOM ICT Services GmbH
HiSax: EU (D133362J) CETECOM ICT Services GmbH
HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: HFC-SX driver Rev. 1.3
HFC-SX: invalid chip id 0xf
HiSax: Card HFC 2BDS0 SX not installed !
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: ST38410A, ATA DISK drive
hdc: SAMSUNG SV0844D, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST38410A, 8223MB w/512kB Cache, CHS=1048/255/63, UDMA
hdc: SAMSUNG SV0844D, 8063MB w/480kB Cache, CHS=16383/16/63, UDMA
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
DC395x (TRM-S1040) SCSI driver 1.10, 1999/07/19
DC395x: Used settings: AdaptID=7
DC395x (TRM-S1040): 1 adapters found
scsi0 : Tekram DC395U/UW/F DC315/U V1.10, 1999/07/19
scsi : 1 host.
DC395x: Target 00: Sync transfer 48 ns, Offset 8
Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09
Type: CD-ROM ANSI SCSI revision: 02
DC395x: Target 01: Wide 16 transfer negotiated
DC395x: Target 01: Sync transfer 48 ns, Offset 15
Vendor: QUANTUM Model: XP34550W Rev: LYK8
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
DC395x: Target 02: Wide 16 transfer negotiated
DC395x: Target 02: Sync transfer 48 ns, Offset 15
Vendor: QUANTUM Model: XP34550W Rev: LYK8
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8890760 [4341 MB] [4.3 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8890760 [4341 MB] [4.3 GB]
Partition check:
sda: sda1
sdb: sdb1
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
hdc: [PTBL] [1027/255/63] hdc1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 128484k swap-space (priority -1)
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
--------------------------------------------------------------------------
Qui' sotto invece vi allego l'output di lspci, gisto per capire
come vede la scheda in questione:
(evidenzio la sezione della scheda tra due cancelletti)
----------------------------------------------------------------------------
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev
03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
#00:09.0 Network controller: Asustek Computer, Inc.: Unknown device 0675 (rev
02)#
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RT8139 (rev 10)
00:0b.0 SCSI storage controller: Tekram Technology Co.,Ltd.: Unknown device
0391 (rev 01)
00:0e.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 06)
00:0e.1 Input device controller: Creative Labs SB Live! (rev 06)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04)
-----------------------------------------------------------------------------
Proseguo sperando possa servire con il risultato di scanpci:
-----------------------------------------------------------------------------
PCI says configuration type 1
PCI probing configuration type 1
Probing for devices on PCI bus 0:
pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x8086 device 0x7190
Intel 82443BX Host
pci bus 0x0 cardnum 0x01 function 0x0000: vendor 0x8086 device 0x7191
Intel 82443BX AGP
pci bus 0x0 cardnum 0x04 function 0x0000: vendor 0x8086 device 0x7110
Intel 82371AB PIIX4 ISA
pci bus 0x0 cardnum 0x04 function 0x0001: vendor 0x8086 device 0x7111
Intel 82371AB PIIX4 IDE
pci bus 0x0 cardnum 0x04 function 0x0002: vendor 0x8086 device 0x7112
Intel 82371AB PIIX4 USB
pci bus 0x0 cardnum 0x04 function 0x0003: vendor 0x8086 device 0x7113
Intel 82371AB PIIX4 ACPI
pci bus 0x0 cardnum 0x0a function 0x0000: vendor 0x1043 device 0x0675
Device unknown
pci bus 0x0 cardnum 0x0b function 0x0000: vendor 0x1de1 device 0x0391
Tekram Device unknown
pci bus 0x0 cardnum 0x0d function 0x0000: vendor 0x10ec device 0x8139
Realtek Device unknown
pci bus 0x0 cardnum 0x0e function 0x0000: vendor 0x1102 device 0x0002
Device unknown
pci bus 0x0 cardnum 0x0e function 0x0001: vendor 0x1102 device 0x7002
Device unknown
Probing for devices on PCI bus 1:
pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x102b device 0x0525
Matrox Device unknown
-------------------------------------------------------------------------
ora metto i vari cat /proc/ioports interrupts e pci:
-------------------------------------------------------------------------
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
b800-b87f : DC395x_TRM
d800-d807 : ide0
d808-d80f : ide1
CPU0
0: 7454 XT-PIC timer
1: 202 XT-PIC keyboard
2: 0 XT-PIC cascade
10: 138 XT-PIC DC395x_TRM
13: 1 XT-PIC fpu
14: 1981 XT-PIC ide0
15: 6 XT-PIC ide1
NMI: 0
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440BX - 82443BX Host (rev 3).
Medium devsel. Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xd0000000 [0xd0000008].
Bus 0, device 1, function 0:
PCI bridge: Intel 440BX - 82443BX AGP (rev 3).
Medium devsel. Master Capable. Latency=64. Min Gnt=136.
Bus 0, device 4, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 4, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
I/O at 0xd800 [0xd801].
Bus 0, device 4, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
I/O at 0xd400 [0xd401].
Bus 0, device 4, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
Medium devsel. Fast back-to-back capable.
Bus 0, device 10, function 0:
Network controller: Unknown vendor Unknown device (rev 2).
Vendor id=1043. Device id=675.
Medium devsel. IRQ 5. Master Capable. Latency=16. Max Lat=16.
I/O at 0xd000 [0xd001].
Non-prefetchable 32 bit memory at 0xcc000000 [0xcc000000].
Bus 0, device 11, function 0:
SCSI storage controller: Tekram Unknown device (rev 1).
Vendor id=1de1. Device id=391.
Medium devsel. IRQ 10. Master Capable. Latency=32.
I/O at 0xb800 [0xb801].
Non-prefetchable 32 bit memory at 0xcb800000 [0xcb800000].
Bus 0, device 13, function 0:
Ethernet controller: Realtek 8139 (rev 16).
Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable.
Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xb400 [0xb401].
Non-prefetchable 32 bit memory at 0xcb000000 [0xcb000000].
Bus 0, device 14, function 0:
Multimedia audio controller: Unknown vendor Unknown device (rev 6).
Vendor id=1102. Device id=2.
Medium devsel. Fast back-to-back capable. IRQ 5. Master Capable.
Latency=32. Min Gnt=2.Max Lat=20.
I/O at 0xb000 [0xb001].
Bus 0, device 14, function 1:
Input device controller: Unknown vendor Unknown device (rev 6).
Vendor id=1102. Device id=7002.
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
I/O at 0xa800 [0xa801].
Bus 1, device 0, function 0:
VGA compatible controller: Matrox Unknown device (rev 4).
Vendor id=102b. Device id=525.
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable.
Latency=64. Min Gnt=16.Max Lat=32.
Prefetchable 32 bit memory at 0xce000000 [0xce000008].
Non-prefetchable 32 bit memory at 0xcd000000 [0xcd000000].
Non-prefetchable 32 bit memory at 0xcc800000 [0xcc800000].
Sperando che qualcuno mi possa dare una mano vi ringrazio tutti in anticipo per
l'attenzione,
Andrea Dettori.
P.S
All'avvio quando il bios elenca le risorse utilizzate dalle varie schede PCI,
mi mette la scheda audio (Sound Blaster LIVE!) sullo stesso IRQ del TA ISDN
sono entrambi elencati sul 5 ...... sara' questa la causa?
----------------------------------
E-Mail: Andrea Dettori <ndr@mixadlive.com>
MixadLive S.r.l.
Web Technology Solution
http://www.mixadlive.com
tel: +39 011 538571
Date: 03-Jul-2000
Time: 11:19:13
This message was sent by XFMail
----------------------------------
Reply to: