Hi,
i tried booting the debian-hppa official first CD and it failed
finding or reading the ramdisk:
Main Menu: Enter command or menu > boot 10/12/5.2
Interact with IPL (Y, N, or Cancel)?> y
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl 1.5 root@c3k Fri May 14 16:17:38 MDT 2004
Boot image contains:
0/vmlinux32 4319117 bytes @ 0x189e800
0/vmlinux64 5820539 bytes @ 0x1311000
0/ramdisk 6233937 bytes @ 0xd16000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current command line:
'0/vmlinux root=/dev/ram initrd=0/ramdisk init=/linuxrc' console=ttyB0 TERM=vt102
0: '0/vmlinux
1: root=/dev/ram
2: initrd=0/ramdisk
3: init=/linuxrc'
4: console=ttyB0
5: TERM=vt102
<#> edit the numbered field
'b' boot with this command line
'r' restore command line
'l' list dir
? b
Command line for kernel: 'root=/dev/ram init=/linuxrc' console=ttyB0 TERM=vt102 palo_kernel=0'0/vmlinux'
Selected kernel: '0/vmlinux from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing...
This box can boot either 32 or 64-bit kernels...Both kernels available, choosing 32-bit kernelELF32 executable
Entry 00100000 first 00100000 n 2
Segment 0 load 00100000 size 2241844 mediaptr 0x1000
Segment 1 load 00324000 size 1056901 mediaptr 0x225000
Loading ramdisk 6233937 bytes @ 3f9fd000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.6.8-2-32 (kyle@caradhras) (gcc version 3.3.5 (Debian 1:3.3.5-7)) #1 Tue Feb 8 00:15:05 EST 2005
FP[0] enabled: Rev 0 Model 14
The 32-bit Kernel has started...
Determining PDC firmware type: System Map.
model 00005a50 00000491 00000000 00000002 1055728e 100000f1 00000008 000000b2 000000b2
vers 00000301
CPUID vers 14 rev 11 (0x000001cb)
capabilities 0x3
model 9000/879/K260
Memory truncated to 3584 Mb
Total Memory: 3584 Mb
initrd: 4f9fd000-4ffeef51
initrd: reserving 3f9fd000-3ffeef51 (mem_max e0000000)
Built 1 zonelists
Kernel command line: root=/dev/ram init=/linuxrc' console=ttyB0 TERM=vt102 palo_kernel=0'0/vmlinux
PID hash table entries: 16 (order 4: 128 bytes)
Console: colour dummy device 160x64
Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Memory: 3670016k available
Calibrating delay loop... 359.62 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Found devices:
1. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0xf, 0x580, 0x0000b }
2. U2-IOA BC GSC+ Port at 0xf103f000 [8/63] { 7, 0x1, 0x501, 0x0000c }
3. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0xf, 0x580, 0x0000b }
4. Mohawk Core FW-SCSI at 0xf1800000 [10/0] { 4, 0x0, 0x044, 0x00089 }
5. Gecko BOA BC GSC+ Port at 0xf1804000 [10/4] { 7, 0x0, 0x500, 0x0000c }
6. Sahp Baat Kiuh AP/MUX at 0xf1900000 [10/4/0] { 5, 0x0, 0x044, 0x0000d }
7. Wizard SCSI at 0xf1904000 [10/4/4] { 4, 0x0, 0x004, 0x0003b }
8. Interphase NIO-100BaseTX at 0xf1908000 [10/4/8] { 4, 0x0, 0x004, 0x00382 }
9. Gecko BOA BC HP-PB Port at 0xf193c000 [10/4/60] { 7, 0x0, 0x103, 0x0000c }
10. Mohawk Core BA at 0xffd00000 [10/12] { 11, 0x0, 0x044, 0x00081 }, additional addresses: 0xffd0c000 0xffc00000
11. Mohawk Core Centronics at 0xffd02000 [10/12/0] { 10, 0x0, 0x044, 0x00074 }, additional addresses: 0xffd01000 0xffd03000
12. Mohawk Core SCSI at 0xffd06000 [10/12/5] { 10, 0x0, 0x044, 0x00082 }
13. Mohawk Core LAN (802.3) at 0xffd07000 [10/12/6] { 10, 0x0, 0x044, 0x0008a }
14. Mohawk Core PS/2 Port at 0xffd08000 [10/12/7] { 10, 0x0, 0x044, 0x00084 }
15. Mohawk Core PS/2 Port at 0xffd08100 [10/12/8] { 10, 0x0, 0x044, 0x00084 }
16. U2-IOA BC GSC+ Port at 0xf183f000 [10/63] { 7, 0x1, 0x501, 0x0000c }
17. Mohawk 180 U 1M DC3- (K260) at 0xfffa0000 [32] { 0, 0x0, 0x5a5, 0x00004 }
18. Mohawk 180 U 1M DC3- (K260) at 0xfffa2000 [34] { 0, 0x0, 0x5a5, 0x00004 }
19. Mohawk 180 U 1M DC3- (K260) at 0xfffa4000 [36] { 0, 0x0, 0x5a5, 0x00004 }
20. Mohawk 180 U 1M DC3- (K260) at 0xfffa6000 [38] { 0, 0x0, 0x5a5, 0x00004 }
21. Memory at 0xfffb1000 [49] { 1, 0x0, 0x053, 0x00009 }
CONFIG_SMP=n ignoring additional CPUs
CPU: probe of parisc34 failed with error 1
CONFIG_SMP=n ignoring additional CPUs
CPU: probe of parisc36 failed with error 1
CONFIG_SMP=n ignoring additional CPUs
CPU: probe of parisc38 failed with error 1
CPU(s): 1 x PA8000 (PCX-U) at 180.000000 MHz
Found U2 at 0xfff88000
Found U2 at 0xfff8a000
Lasi version 0 at 0xffd00000 found.
LED display at ffd0c000 registered
Found GeckoBoa at 0xf1804000
SCSI subsystem initialized
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
STI GSC/PCI core graphics driver Version 0.9a
unwind_init: start = 0x10325720, end = 0x103468a0, entries = 8472
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Soft power switch support not available.
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 25 ports, IRQ sharing enabled
Serial mux driver (8 ports) Revision: 0.3
ttyB0 at MMIO 0xf1900800 (polled) is a Mux
ttyB1 at MMIO 0xf1900880 (polled) is a Mux
ttyB2 at MMIO 0xf1900900 (polled) is a Mux
ttyB3 at MMIO 0xf1900980 (polled) is a Mux
ttyB4 at MMIO 0xf1900a00 (polled) is a Mux
ttyB5 at MMIO 0xf1900a80 (polled) is a Mux
ttyB6 at MMIO 0xf1900b00 (polled) is a Mux
ttyB7 at MMIO 0xf1900b80 (polled) is a Mux
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
mice: PS/2 mouse device common for all mice
serio: GSC PS2 keyboard port at 0xffd08000 irq 69 @ parisc10:12:7
serio: GSC PS2 mouse port at 0xffd08100 irq 69 @ parisc10:12:8
HP SDC: No SDC found.
HP SDC MLC: Registering the System Domain Controller's HIL MLC.
HP SDC MLC: Request for raw HIL ISR hook denied
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
RAMDISK: Compressed image found at block 0
RAMDISK: incomplete write (-28 != 32768) 8388608
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 316k freed
attempt to access beyond end of device
ram0: rw=0, want=26816, limit=16384
attempt to access beyond end of device
ram0: rw=0, want=26816, limit=16384
Warning: unable to open an initial console.
attempt to access beyond end of device
ram0: rw=0, want=28528, limit=16384
EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block - inode=1813, block=14263
attempt to access beyond end of device
ram0: rw=0, want=28558, limit=16384
EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block - inode=1933, block=14278
Kernel panic: No init found. Try passing init= option to kernel.
--
Florian Lohoff flo@rfc822.org +49-171-2280134
Heisenberg may have been here.
Attachment:
signature.asc
Description: Digital signature