Disaster strikes
Hi All
I have been running my RP5430 without a hitch for nearly a month, I wanted
to start adding services so ran apt-get dist-upgrade.
The box has come up with the root FS read only.
This is causing me a few problems (as you may guess).
I have had a look at the fstab file and saw that it is set to mount ro on
errors, problem is I can't spot the errors, and wouldn't be able to do much
with an ro filesystem anyway.
below is the output from the GSP when booting.
All help appreciated.
James
----------Begin log file--------------------
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2004.07.13 16:38:40
=~=~=~=~=~=~=~=~=~=~=~=
Service Processor login: jamesService Processor password:
Hewlett-Packard Guardian Service Processor
(c) Copyright Hewlett-Packard Company 1999-2001. All Rights Reserved.
System Name: fileserver-c
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
I/O INIT 8701
memory config 7240
memory INIT 7702
memory config 72A0
memory test 71A1
memory test 71A2
memory test 71A4
memory test 71A5
memory test 71A6
memory test 71A3
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A4
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A5
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory test 71A6
memory config 7240
I/O config 8204
I/O config 8204
I/O config 8204
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O test 8119
I/O config 8204
processor test 1120
processor test 1133
processor test 1135
processor test 1152
processor test 1139
processor test 113A
processor test 113B
processor test 113C
processor test 113D
processor test 113E
processor INIT 1701
processor test 1120
processor test 1142
processor test 113B
platform test 612A
I/O config 8238
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
Firmware Version 41.36
Duplex Console IO Dependent Code (IODC) revision 1
----------------------------------------------------------------------------
--
(c) Copyright 1995-2000, Hewlett-Packard Company, All rights reserved
----------------------------------------------------------------------------
--
Processor Speed State CoProcessor State Cache Size
Number State Inst
Data
--------- -------- --------------------- ----------------- ----------
--
0 650 MHz Active Functional 750 KB 1.5
MB
Central Bus Speed (in MHz) : 133
Available Memory : 1048576 KB
Good Memory Required : 25000 KB
Primary boot path: 0/0/2/0.2
Alternate boot path: 0/0/2/1.2
Console path: 0/0/4/1.0
Keyboard path: 0/0/4/0.0
Processor is starting autoboot process.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl 1.4 root@c3k Fri Mar 26 16:18:24 MST 2004
Bad DOS magic in extended partition
Partition Start(MB) End(MB) Id Type
1 1 95 f0 Palo
2 96 572 83 ext2
5 573 4864 83 ext2
PALO(F0) partition contains:
0/vmlinux64 6666431 bytes @ 0x44000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: 'root=/dev/sda2 HOME=/ console=ttyS0 TERM=vt102
palo_kernel=2/boot/vmlinux'
Selected kernel: /boot/vmlinux from partition 2
ELF64 executable
Entry 00100000 first 00100000 n 4
Segment 0 load 00100000 size 3664936 mediaptr 0x1000
Segment 1 load 00480000 size 1497480 mediaptr 0x380000
Segment 2 load 005f0000 size 336624 mediaptr 0x4ee000
Segment 3 load 00644000 size 49152 mediaptr 0x541000
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.4.26-64-smp (root@k2000) (gcc version 3.0.4) #1 SMP Sun Jun
20 22:45:36 CEST 2004
FP[0] enabled: Rev 1 Model 19
The 64-bit Kernel has started...
Determining PDC firmware type: 64 bit PAT.
model 00005e00 00000491 00000000 00000002 2ef72083 100000f1 00000008
000000b2 000000b2
vers 00000203
CPUID vers 19 rev 8 (0x00000268)
capabilities 0x5
model 9000/800/L1500-6x
Total Memory: 1024 Mb
pagetable_init
On node 0 totalpages: 262144
zone(0): 262144 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda2 HOME=/ console=ttyS0 TERM=vt102
palo_kernel=2/boot/vmlinux
Console: colour dummy device 160x64
Calibrating delay loop... 1297.61 BogoMIPS
Memory: 1018004k available
Dentry cache hash table entries: 131072 (order: 9, 2097152 bytes)
Inode cache hash table entries: 65536 (order: 8, 1048576 bytes)
Mount cache hash table entries: 256 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 7, 524288 bytes)
Page-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Searching for devices...
Found devices:
1. Memory (1) at 0xfffffffffedc0000 [192], versions 0x90, 0x0, 0x9
2. IKE I/O Bus Converter Merced Port (7) at 0xfffffffffed00000 [0], versions
0x803, 0x0, 0xc
3. Elroy PCI Bridge (13) at 0xffffffff9ffe0000 [0/0], versions 0x782, 0x0,
0xa
4. Elroy PCI Bridge (13) at 0xffffffff9ffe2000 [0/1], versions 0x782, 0x0,
0xa
5. Elroy PCI Bridge (13) at 0xffffffff9ffe4000 [0/2], versions 0x782, 0x0,
0xa
6. Elroy PCI Bridge (13) at 0xffffffff9ffe6000 [0/3], versions 0x782, 0x0,
0xa
7. Elroy PCI Bridge (13) at 0xffffffff9ffe8000 [0/4], versions 0x782, 0x0,
0xa
8. Elroy PCI Bridge (13) at 0xffffffff9ffea000 [0/5], versions 0x782, 0x0,
0xa
9. Elroy PCI Bridge (13) at 0xffffffff9fff0000 [0/8], versions 0x782, 0x0,
0xa
10. Elroy PCI Bridge (13) at 0xffffffff9fff2000 [0/9], versions 0x782, 0x0,
0xa
11. Elroy PCI Bridge (13) at 0xffffffff9fff4000 [0/10], versions 0x782, 0x0,
0xa
12. Elroy PCI Bridge (13) at 0xffffffff9fff8000 [0/12], versions 0x782, 0x0,
0xa
13. DEW BC Runway Port (7) at 0xfffffffffed20000 [32], versions 0x584, 0x0,
0xc
14. Unknown machine (0) at 0xfffffffffed21000 [33], versions 0x5e0
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH OFF ON ON
LED State: There was a system interruption that did not take the system
down.
Check Chassis and Console Logs for error messages.
processor system initialization 1C00
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-1: rev 0x37 on pci bus 0 device 2 function 1 irq 131
sym53c875-1: ID 7, Fast-20, Parity Checking
sym53c895-2: rev 0x2 on pci bus 80 device 0 function 0 irq 640
sym53c895-2: ID 7, Fast-40, Parity Checking
sym53c895-3: rev 0x2 on pci bus 96 device 0 function 0 irq 704
sym53c895-3: ID 7, Fast-40, Parity Checking
sym53c896-4: rev 0x7 on pci bus 0 device 1 function 0 irq 129
sym53c896-4: ID 7, Fast-20, Parity Checking
sym53c896-4: handling phase mismatch from SCRIPTS.
sym53c896-5: rev 0x7 on pci bus 0 device 1 function 1 irq 130
sym53c896-5: ID 7, Fast-20, Parity Checking
sym53c896-5: handling phase mismatch from SCRIPTS.
scsi0 : sym53c8xx-1.7.3c-20010512
scsi1 : sym53c8xx-1.7.3c-20010512
scsi2 : sym53c8xx-1.7.3c-20010512
scsi3 : sym53c8xx-1.7.3c-20010512
scsi4 : sym53c8xx-1.7.3c-20010512
scsi5 : sym53c8xx-1.7.3c-20010512
blk: queue 000000004f9dac40, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP 18.2G Model: MAN3184MC Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue 000000004f9daa40, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP Model: DVD-ROM 305 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
blk: queue 000000004f9da840, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP 18.2G Model: ST318406LC Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue 000000004f9da640, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP 18.2G Model: ST318406LC Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue 000000004f9da440, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP 18.2G Model: ST318406LC Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue 000000004f9da240, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP 18.2G Model: ST318406LC Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue 000000004f9da040, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP 18.2G Model: ST318406LC Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue 000000004f7f5e40, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP 18.2G Model: ST318406LC Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue 000000004f7f5c40, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP 18.2G Model: ST318406LC Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue 000000004f7f5a40, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP 18.2G Model: ST318406LC Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue 000000004f7f5840, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP Model: C5683A Rev: C104
Type: Sequential-Access ANSI SCSI revision: 02
blk: queue 000000004f7f5640, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP 18.2G Model: MAN3184MC Rev: HP04
Type: Direct-Access ANSI SCSI revision: 02
blk: queue 000000004f7f5440, I/O limit 4095Mb (mask 0xffffffff)
st: Version 20040102, bufsize 32768, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi4, channel 0, id 3, lun 0
Attached scsi disk sda at scsi0, channel 0, id 2, lun 0
Attached scsi disk sdb at scsi2, channel 0, id 8, lun 0
Attached scsi disk sdc at scsi2, channel 0, id 10, lun 0
Attached scsi disk sdd at scsi2, channel 0, id 12, lun 0
Attached scsi disk sde at scsi2, channel 0, id 14, lun 0
Attached scsi disk sdf at scsi3, channel 0, id 8, lun 0
Attached scsi disk sdg at scsi3, channel 0, id 10, lun 0
Attached scsi disk sdh at scsi3, channel 0, id 12, lun 0
Attached scsi disk sdi at scsi3, channel 0, id 14, lun 0
Attached scsi disk sdj at scsi5, channel 0, id 2, lun 0
sym53c875-0-<2,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB)
Partition check:
/dev/scsi/host0/bus0/target2/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 >
sym53c895-2-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
sym53c895-2-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB)
/dev/scsi/host2/bus0/target8/lun0: unknown partition table
sym53c895-2-<10,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sdc: 35566480 512-byte hdwr sectors (18210 MB)
/dev/scsi/host2/bus0/target10/lun0: unknown partition table
sym53c895-2-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sdd: 35566480 512-byte hdwr sectors (18210 MB)
/dev/scsi/host2/bus0/target12/lun0: unknown partition table
sym53c895-2-<14,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sde: 35566480 512-byte hdwr sectors (18210 MB)
/dev/scsi/host2/bus0/target14/lun0: unknown partition table
sym53c895-3-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sdf: 35566480 512-byte hdwr sectors (18210 MB)
/dev/scsi/host3/bus0/target8/lun0: unknown partition table
sym53c895-3-<10,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sdg: 35566480 512-byte hdwr sectors (18210 MB)
/dev/scsi/host3/bus0/target10/lun0: unknown partition table
sym53c895-3-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sdh: 35566480 512-byte hdwr sectors (18210 MB)
/dev/scsi/host3/bus0/target12/lun0: unknown partition table
sym53c895-3-<14,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sdi: 35566480 512-byte hdwr sectors (18210 MB)
/dev/scsi/host3/bus0/target14/lun0: unknown partition table
sym53c896-5-<2,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 31)
SCSI device sdj: 35566480 512-byte hdwr sectors (18210 MB)
/dev/scsi/host5/bus0/target2/lun0: unknown partition table
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 2, lun 0
sym53c875-1-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 16)
sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
STI GSC/PCI graphics driver version 0.9
BUG: Skipping previously registered driver: sti (native)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
HP SDC: No SDC found.
HP SDC MLC: Registering the System Domain Controller's HIL MLC.
HP SDC MLC: Request for raw HIL ISR hook denied
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2984.400 MB/sec
8regs_prefetch: 2180.400 MB/sec
32regs : 2426.000 MB/sec
32regs_prefetch: 2289.600 MB/sec
raid5: using function: 8regs (2984.400 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 1024 buckets, 40Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) re
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH OFF ON ON
LED State: There was a system interruption that did not take the system
down.
Check Chassis and Console Logs for error messages.
processor system initialization 1C00
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
Activating swap.
Adding Swap: 790504k swap-space (priority -1)
mount: you must specify the filesystem type
*** ERROR! Cannot fsck root fs because it is not mounted read-only!
mount: you must specify the filesystem type
/etc/init.d/rcS: System clock was not updated at this time.
Not calculating module dependencies: /lib/modules/2.4.26-64-smp is read
only.
Loading modules:
Starting raid devices:
done.
device-mapper: 4.0.5-ioctl (2003-11-18) initialised: dm@uk.sistina.com
Checking all file systems...
fsck 1.35 (28-Feb-2004)
/dev/sda5: recovering journal
/dev/sdc was not cleanly unmounted, check forced.
/dev/sdb was not cleanly unmounted, check forced.
/dev/sde was not cleanly unmounted, check forced.
/dev/sdf was not cleanly unmounted, check forced.
/dev/sdd was not cleanly unmounted, check forced.
/dev/sda5: clean, 44183/549440 files, 190244/1098748 blocks
/dev/sdg was not cleanly unmounted, check forced.
/dev/sda6: recovering journal
/dev/sdh was not cleanly unmounted, check forced.
/dev/sda6: clean, 1722/354112 files, 67329/708092 blocks
/dev/sda7: recovering journal
/dev/sda7: clean, 13/48672 files, 10251/97264 blocks
/dev/sda8: recovering journal
/dev/sda8: clean, 15/1135680 files, 43867/2270460 blocks
/dev/sdc: 11/2223872 files (0.0% non-contiguous), 69806/4445810 blocks
/dev/sdd: 11/2223872 files (0.0% non-contiguous), 69806/4445810 blocks
/dev/sde: 11/2223872 files (0.0% non-contiguous), 69806/4445810 blocks
/dev/sdg: 11/2223872 files (0.0% non-contiguous), 69806/4445810 blocks
/dev/sdf: 11/2223872 files (0.0% non-contiguous), 69806/4445810 blocks
/dev/sdb: 11/2223872 files (0.0% non-contiguous), 69806/4445810 blocks
/dev/sdh: 12/2223872 files (0.0% non-contiguous), 69807/4445810 blocks
Setting kernel variables ...
... done.
Mounting local filesystems...
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda5 on /usr type ext3 (rw)
/dev/sda6 on /var type ext3 (rw)
/dev/sda7 on /tmp type ext3 (rw)
/dev/sda8 on /home type ext3 (rw)
/dev/sdb on /disk/raid/a type ext2 (rw)
/dev/sdc on /disk/raid/b type ext2 (rw)
/dev/sdd on /disk/raid/c type ext2 (rw)
/dev/sde on /disk/raid/d type ext2 (rw)
/dev/sdf on /disk/raid/e type ext2 (rw)
/dev/sdg on /disk/raid/f type ext2 (rw)
/dev/sdh on /disk/raid/g type ext2 (rw)
Cleaning /tmp /var/run /var/lock.
Detecting hardware: tulip ncr53c8xx ncr53c8xx sym53c8xx sym53c8xx ncr53c8xx
ncr53c8xx
modprobe: Can't locate module tulip
Skipping tulip module; assuming it is compiled into the kernel.
modprobe: Can't locate module ncr53c8xx
Skipping ncr53c8xx module; assuming it is compiled into the kernel.
modprobe: Can't locate module ncr53c8xx
Skipping ncr53c8xx module; assuming it is compiled into the kernel.
modprobe: Can't locate module sym53c8xx
Skipping sym53c8xx module; assuming it is compiled into the kernel.
modprobe: Can't locate module sym53c8xx
Skipping sym53c8xx module; assuming it is compiled into the kernel.
modprobe: Can't locate module ncr53c8xx
Skipping ncr53c8xx module; assuming it is compiled into the kernel.
modprobe: Can't locate module ncr53c8xx
Skipping ncr53c8xx module; assuming it is compiled into the kernel.
rm: cannot remove `/media/cdrom0': Read-only file system
Running 0dns-down to make sure resolv.conf is ok...done.
Cleaning: /etc/network/ifstate/etc/rcS.d/S39ifupdown: line 7:
/etc/network/ifstate: Read-only file system
Starting hotplug subsystem:
input
input [failed]
isapnp
isapnp [success]
net
/etc/hotplug/net.rc: line 9: /etc/hotplug/net.enable: Read-only file system
net [failed]
pci
** can't synthesize pci hotplug events
pci [failed]
usb
** can't synthesize root hub events
usb [success]
done
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces...ifup: failed to open statefile
/etc/network/ifstate: Read-only file system
done.
Starting portmap daemon: portmap
INIT: Entering runlevel: 2Starting system log daemon: syslogdchmod: changing
permissions of `/dev/xconsole': Read-only file system
syslogd: cannot create /dev/log: Read-only file system.
Starting kernel log daemon: klogd.
Starting domain name service: named.
Starting domain name service: lwresd.
Starting portmap daemon: portmap.
Setting NIS domainname to: photonicmaterials.sol.co.uk
Starting NIS services: ypbind [binding to YP server .......... backgrounded]
Starting MTA: exim4.
Starting internet superserver: inetd.
Starting printer spooler: lpd.
Starting PostgreSQL database server: postmaster(FAILED)
ERROR: The database is in an older format that cannot be read by
version 7.4 of PostgreSQL.
Run postgresql-dump to dump the old database and to reload
it in the new format.
*** READ /usr/share/doc/postgresql/README.Debian.migration.gz FIRST! ***
The version 7.4 postmaster cannot be started until
this is done.
Starting OpenBSD Secure Shell server: sshd.
Starting RAID monitor daemon: mdadm -F.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
Starting raid devices:
done.
Debian GNU/Linux testing/unstable goliath ttyS0
goliath login:
[Read only - use ^Ecf for console write access.]
[Read only - use ^Ecf for console write access.]
[bumped user - ]
Debian GNU/Linux testing/unstable goliath ttyS0
goliath login: root
Password:
Last login: Tue Jul 13 16:32:02 2004 on ttyS0
Linux goliath 2.4.26-64-smp #1 SMP Thu Apr 29 04:59:03 UTC 2004 parisc64
GNU/Linux
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Unable to change tty /dev/ttyS0: Read-only file system
goliath:
---------------End log file------------------------------------------
-----Original Message-----
From: Martin-Eric Racine [mailto:q-funk@pp.fishpool.fi]On Behalf Of
Martin-Éric Racine
Sent: 01 July 2004 18:01
To: debian-hppa@lists.debian.org
Cc: debian-hppa@lists.debian.org; debian-gcc@lists.debian.org
Subject: Re: Removing gcc-3.0 from unstable/testing
On Wed, 30 Jun 2004, Grant Grundler wrote:
> On Tue, Jun 29, 2004 at 08:11:46PM +0300, Martin-?ric Racine wrote:
> > Wasn't PALO (the bootloader) also build-dependant upon 3.0 at some
point?
>
> Not really. It was a coincendence palo built with gcc 3.0 worked
> and palo built with later gcc didn't. The bug was in palo and I'm
> pretty sure paul fixed it in palo 1.5.
OK, good to know. Do I assume that there's nothing left that prevents 3.3
from
becoming the default compiler on hppa, then?
--
Martin-Éric Racine, ICT Consultant
http://www.iki.fi/q-funk/
Reply to: