Hello again, I've captured the complete sequence of bootup messages with minicom. Thought they might be useful. I also spotted a spelling mistake :-) 82596.c: MAC of HP700 LAN blindely read from the prom ==^== Here we go: Type ? <item> or HELP <item> for more help. b) Boot from specified device s) Search for bootable devices a) Enter Boot Administration mode x) Exit and continue boot sequence ?) Help Select from menu: s Searching for Devices with Bootable Media. To terminate search, press and hold the ESCAPE key. Device Selection Device Path Device Type and Utilities ---------------------------------------------------------------------------- P0 scsi.3.0 TOSHIBA CD-ROM XM-3301TA IPL Enter boot selection, (h)elp, or e(x)it: p0 Trying scsi.3.0 Boot path initialized. Attempting to load IPL. Hard booted. palo ipl 0.92 root@spqr Mon Jun 25 23:03:13 CEST 2001 0/vmlinux32 2853588 bytes @ 0x6ad6800 0/vmlinux64 3585851 bytes @ 0x6d8f800 0/ramdisk 1991209 bytes @ 0x70fb000 Command line: 'root=/dev/ram console=ttyS0 TERM=vt102' Kernel: partition 0 file /vmlinux Ramdisk: partition 0 file /ramdisk Warning: kernel name doesn't end with 32 or 64... Guessing Annoyance: Firmware does not support PDC_MODEL_CAPABILITIES call 32 ELF32 executable Entry 00100000 first 00100000 n 4 Segment 0 load 00100000 size 1606948 mediaptr 0x1000 Segment 1 load 0028a000 size 468472 mediaptr 0x18a000 Segment 2 load 00300000 size 8192 mediaptr 0x1fd000 Segment 3 load 0034bea8 size 80688 mediaptr 0x1ffea8 Loading ramdisk 1991209 bytes @ 05e09000... branching to kernel entry point 0x00100000 Linux version 2.4.0-32 (root@slab) (gcc version 3.0 (Debian)) #1 Thu Jun 28 11:49:00 BST 2001 FP[0] enabled: Rev 3 Model 0 The 32-bit Kernel has started... Determining PDC firmware type: Older Legacy Box model 00002000 00000481 00000000 00000000 77544852 000011f4 00000004 0000000d 00000000 vers 00000003 CPUID vers 0 rev 0 model 9000/720 Total Memory: 96 Mb initrd: 15e09000-15fef229 On node 0 totalpages: 24576 zone(0): 24576 pages. zone(1): 0 pages. zone(2): 0 pages. Searching for devices... Found devices: 1. Coral SGC Graphics (10) at 0xf8000000, versions 0x4, 0x0, 0x77, 0x0, 0x0 2. Cobra Core BA (11) at 0xf082f000, versions 0x4, 0x0, 0x70, 0x0, 0x0 3. Cobra Core SCSI (10) at 0xf0825000, versions 0x4, 0x0, 0x71, 0x0, 0x0 4. Cobra Core LAN (802.3) (10) at 0xf0826000, versions 0x4, 0x0, 0x72, 0x0, 0x0 5. Cobra Core HIL (10) at 0xf0821000, versions 0x4, 0x0, 0x73, 0x0, 0x0 6. Cobra Core RS-232 (10) at 0xf0823000, versions 0x4, 0x0, 0x75, 0x0, 0x0 7. Cobra Core RS-232 (10) at 0xf0822000, versions 0x4, 0x0, 0x75, 0x0, 0x0 8. Cobra Core Centronics (10) at 0xf0824000, versions 0x4, 0x0, 0x74, 0x0, 0x0 9. Cobra (720) (0) at 0xfffbe000, versions 0x200, 0x0, 0x4, 0x0, 0x81 10. Cobra (1) at 0xfffbf000, versions 0x13, 0x0, 0x9, 0x0, 0x0 That's a total of 10 devices. CPU(s): 1 x PA7000 (PCX-S) at 50.000000 MHz Kernel command line: root=/dev/ram console=ttyS0 TERM=vt102 Console: colour dummy device 160x64 Calibrating delay loop... 49.86 BogoMIPS Memory: 92200k available Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX ASP version 1 at 0xf0800000 found. LED (ASP-style) display at f0800020 registered Found HIL at 0xf0821000, IRQ 94 HIL: no keyboard present. Warning : device (10, 0x4, 0x0, 0x73, 0x0) NOT claimed by HIL 712, 715 or similiar sticonsole_init: searching for STI ROMs STI byte mode ROM at f8000000, hpa=f8000000 STI byte mode ROM, id 26d1488c-40a00499, conforms to spec rev. 8.02 STI device: HPA1924A Console: switching to colour STI console 160x64 Found i82596 at 0xf0826000, IRQ 87 early initialization of device eth0 is deferred Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 Found ELM/GRX graphics. Support is not finished yet. pty: 256 Unix98 ptys configured request_module[parport_lowlevel]: Root fs not mounted lp: driver loaded but no devices found RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize loop: enabling 8 loop devices 82596.c: MAC of HP700 LAN blindely read from the prom eth0: Couldn't get consistent shared memory eth0: 82596 at 0xf0826000, 08 00 09 25 4B E1 IRQ 87. 82596.c $Revision: 1.18 $ RAMDISK: Compressed image found at block 0 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at iomem 0xf0823800 (irq = 90) is a 16550A ttyS01 at iomem 0xf0822800 (irq = 89) is a 16550A Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com) parport_init_chip: enhanced parport-modes not supported. parport0: PC-style at 0xf0824800, irq 88 [PCSPP] lp0: using parport0 (interrupt-driven). SCSI subsystem driver Revision: 1.00 sim700: Configuring 53c700 (SCSI-ID 7) at f0825100, IRQ 86, options 1 scsi0: Revision 0x0 scsi0: test 1 completed ok. scsi0 : LASI/Simple 53c7xx Vendor: TOSHIBA Model: CD-ROM XM-3301TA Rev: 0272 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Uniform CD-ROM driver Revision: 3.12 md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md.c: sizeof(mdp_super_t) = 4096 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) IP-Config: Incomplete network configuration information. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem). handle_interruption() pid=1 command='init' handle_interruption() pid=1 command='init' handle_interruption() pid=1 command='init' handle_interruption() pid=1 command='init' handle_interruption() pid=1 command='init' handle_interruption() pid=1 command='init' handle_interruption() pid=1 command='init' ... Regards, Albert
Attachment:
pgpLg7DLCHNZt.pgp
Description: PGP signature