Bug#671682: Successful Wheezy netinst report
Package: installation-reports
Boot method: netinst CD
Image version: 05-May-2012 17:37 http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 05-May-2012 21:00
Machine: Custom
Processor: Pentium 4 2.40GHz
Memory: 256MiB DDR1/333MHz
Partitions:
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 10741759 5369856 83 Linux (ext4)
/dev/sda2 10741760 12705791 982016 82 Linux swap / Solaris
Output of lspci -knn:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:80a5]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard [1043:80a5]
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:80f8]
Kernel driver in use: e100
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O] (expert-install)
Detect network card: [O]
Configure network: [O] (manual, didn't use DHCP)
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O] (manual)
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O] (no root login)
Install tasks: [O] (no desktop)
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Everything worked without a hitch. Thanks to all contributors. :)
Minor cosmetic gripe:
After selecting "Install GRUB boot loader" the screen stayed blue for quite
a bit while the (slow) HDD was active. This could confuse some users.
Reply to: