Re: Duplicate os-prober issue on errata
Hi,
Thanks for spotting that!
Fixed and improved indentation.
A Sábado 06 Novembro 2010 19:01:30 David Prévot você escreveu:
> Hi Miguel, debian-boot CC [please, keep me CC, I'm not subscribed],
>
> You recently updated the devel/debian-installer/errata.wml webpage, but
> I wonder if you didn't remove the “zipl installation” section by mistake
> instead of the following os-prober one you nearly duplicated.
>
> http://cvs.debian.org/webwml/webwml/english/devel/debian-installer/errata.w
> ml?r1=1.133&r2=1.134
>
> Regards
>
> David
--
Melhores cumprimentos/Best regards,
Miguel Figueiredo
http://www.DebianPT.org
Index: errata.wml
===================================================================
RCS file: /cvs/webwml/webwml/english/devel/debian-installer/errata.wml,v
retrieving revision 1.135
diff -u -r1.135 errata.wml
--- errata.wml 5 Nov 2010 02:30:27 -0000 1.135
+++ errata.wml 7 Nov 2010 21:12:17 -0000
@@ -12,12 +12,15 @@
<dl class="gloss">
<dt>Partitoning fails on kFreeBSD</dt>
- <dd>There are reports of failing partitioning on kFreeBSD.
- The problem seems to be related with partitions alignment / extended partitions.<br />
+ <dd>
+ There are reports of failing partitioning on kFreeBSD.
+ The problem seems to be related with partitions alignment / extended
+ partitions.<br />
See <a href="http://bugs.debian.org/593733";>#593733</a>,
<a href="http://bugs.debian.org/597088";>#597088</a> and
<a href="http://bugs.debian.org/602129";>#602129</a>.
</dd>
+
<dt>Hibernation doesn't work with swap on lvm</dt>
<dd>
Resuming from hibernation doesn't work if swap is on lvm. initramfs
@@ -25,32 +28,41 @@
/etc/initramfs-tools/conf.d/resume.
See <a href="http://bugs.debian.org/568877";>#568877</a>.
</dd>
+
<dt>Network/Graphic/Storage card doesn't work properly</dt>
<dd>
- There is several hardware, notably network cards, graphic cards and storage controllers, that require binary non-free firmware to work properly.<br />
- Debian is commited to free software values and never make the system require non-free software (see Debian's <a href="http://www.debian.org/social_contract";>Social Contract</a>). So, non-free firmware is not included in the installer.<br />
- But if you want to load any external firmware during installation you are free to do it. The process is documented in the installation manual.
- </dd>
- <dt>os-prober causes data corruption if filesystem is being used by another host</dt>
- <dd>
- os-prober causes data corruption on setups where filesystems are
- already mounted on other hosts. This issue has been identified on
- a SAN setup and on a virtual machine that uses an existing logical
- volume.
- See <a href="http://bugs.debian.org/599203";>#599203</a> and
- <a href="http://bugs.debian.org/556739";>#556739</a>.
+ There is several hardware, notably network cards, graphic cards and
+ storage controllers, that require binary non-free firmware to work
+ properly.<br />
+ Debian is commited to free software values and never make the system
+ require non-free software (see Debian's <a href="http://www.debian.org/social_contract";>
+ Social Contract</a>). So, non-free firmware is not included in the
+ installer.<br />
+ But if you want to load any external firmware during installation
+ you are free to do it. The process is documented in the installation manual.
+ </dd>
+
+ <dt>zipl installation problem that makes s390 uninstalable</dt>
+ <dd>
+ If created a dedicated partition for the /boot directory system-boot
+ fails after installation.</br >
+ See <a href="http://bugs.debian.org/519254";>#519254</a>.
+ </dd>
+
<dt>os-prober causes data corruption on a SAN setup</dt>
<dd>
os-prober causes data corruption on a SAN setup;
mounts SAN volumes that are already mounted on a different host.
See <a href="http://bugs.debian.org/599203";>#599203</a>.
</dd>
+
<dt>Failed to install on powerpc NewWorld with added disk controller</dt>
<dd>
yaboot: failed to install boot loader with addon Promise card
as disk controller on powerpc NewWorld.
See <a href="http://bugs.debian.org/589701";>#589701</a>.
</dd>
+
<dt>Speakup doesn't get automatically configured</dt>
<dd>
When installing with speakup enabled, speakup doesn't get
@@ -63,6 +75,7 @@
where foobar is replaced by the name of the desired speakup driver. Then
come back to VT1 to let d-i finish and reboot.
</dd>
+
<dt>Buggy routers may cause network problems</dt>
<dd>
If you experience network problems during the installation, this may be
@@ -80,6 +93,7 @@
<tt>echo 4096 65536 65536 >/proc/sys/net/ipv4/tcp_rmem</tt><br />
<tt>echo 4096 65536 65536 >/proc/sys/net/ipv4/tcp_wmem</tt>
</dd>
+
<dt>Country names not properly sorted in English</dt>
<dd>
During mirror selection the list of country name is sorted by
Reply to: