Your message dated Sun, 7 Nov 2010 20:18:57 +0100 with message-id <20101107191857.GM13649@mykerinos.kheops.frmug.org> and subject line Re: Bug#602737: Failure to find iso image from thumb drive has caused the Debian Bug report #602737, regarding Failure to find iso image from thumb drive to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 602737: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=602737 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Failure to find iso image from thumb drive
- From: "Dr. David Alan Gilbert" <debian@treblig.org>
- Date: Sun, 7 Nov 2010 16:39:41 +0000
- Message-id: <[🔎] 20101107163941.GA14277@gallifrey>
Package: installation-reports Boot method: USB thumb Image version: http://http.us.debian.org/debian/dists/testing/main/installer-i386/current/images/netboot/ , http://http.us.debian.org/debian/dists/testing/main/installer-i386/current/images/hd-media/boot.img.gz Date: 2010-11-07, 16:20:00 UTC Machine: Asus eeepc 1001HA Processor: Atom Memory: 1GB Partitions: /dev/sda1 * 1 30 240943+ 83 Linux /dev/sda2 31 3771 30045532+ 83 Linux /dev/sda3 7326 19458 97451955 5 Extended /dev/sda4 3772 7325 28547505 83 Linux /dev/sda5 7326 7823 4000153+ 82 Linux swap / Solaris /dev/sda6 7824 19076 90381312 83 Linux /dev/sda7 19076 19458 3068928 82 Linux swap / Solaris during install /dev/sdb was the thumb drive Output of lspci -knn (or lspci -nn): uname -a: Linux (none) 2.6.32-5-486 #1 Thu Oct 14 16:56:52 UTC 2010 i686 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:8340] lspci -knn: Kernel driver in use: agpgart-intel lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:8340] lspci -knn: 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:8340] lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:83ce] lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:830f] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:830f] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:830f] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:830f] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:830f] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:830f] lspci -knn: 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:830f] lspci -knn: Kernel driver in use: ahci lspci -knn: 01:00.0 Ethernet controller [0200]: Atheros Communications AR8132 Fast Ethernet [1969:1062] (rev c0) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:838a] lspci -knn: 02:00.0 Network controller [0280]: RaLink RT3090 Wireless 802.11n 1T/1R PCIe [1814:3090] lspci -knn: Subsystem: Device [1a3b:1087] usb-list: usb-list: Bus 01 Device 01: EHCI Host Controller [1d6b:0002] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-486 ehci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 01 Device 02: USB 2.0 Camera [13d3:5108] usb-list: Level 01 Parent 01 Port 01 Class ef(misc ) Subclass 02 Protocol 01 usb-list: Manufacturer: Sonix Technology Co., Ltd. usb-list: Interface 00: Class 0e(video) Subclass 01 Protocol 00 Driver <none> usb-list: Interface 01: Class 0e(video) Subclass 02 Protocol 00 Driver <none> usb-list: usb-list: Bus 01 Device 03: USB Mass Storage Device [1307:0165] usb-list: Level 01 Parent 01 Port 05 Class 00(>ifc ) Subclass 00 Protocol 00 usb-list: Manufacturer: USBest Technology usb-list: Interface 00: Class 08(mstor) Subclass 06 Protocol 50 Driver usb-storage usb-list: usb-list: Bus 02 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 03 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 04 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub usb-list: usb-list: Bus 05 Device 01: UHCI Host Controller [1d6b:0001] usb-list: Level 00 Parent 00 Port 00 Class 09(hub ) Subclass 00 Protocol 00 usb-list: Manufacturer: Linux 2.6.32-5-486 uhci_hcd usb-list: Interface 00: Class 09(hub ) Subclass 00 Protocol 00 Driver hub lsmod: Module Size Used by lsmod: nls_utf8 908 1 lsmod: nls_cp437 4489 1 lsmod: loop 9537 1 lsmod: isofs 24384 0 lsmod: vfat 6502 1 lsmod: fat 34344 1 vfat lsmod: reiserfs 172676 0 lsmod: ext3 92368 0 lsmod: jbd 27750 1 ext3 lsmod: ext2 45062 0 lsmod: mbcache 3482 2 ext3,ext2 lsmod: ide_generic 801 0 [permanent] lsmod: ide_core 59362 1 ide_generic lsmod: fan 2590 0 lsmod: usb_storage 30377 1 lsmod: sd_mod 25757 1 lsmod: crc_t10dif 1012 1 sd_mod lsmod: uhci_hcd 15953 0 lsmod: ahci 27318 0 lsmod: ehci_hcd 27753 0 lsmod: thermal 9210 0 lsmod: libata 117059 1 ahci lsmod: thermal_sys 9346 2 fan,thermal lsmod: usbcore 97941 4 usb_storage,uhci_hcd,ehci_hcd lsmod: scsi_mod 102061 3 usb_storage,sd_mod,libata lsmod: nls_base 4445 6 nls_utf8,nls_cp437,isofs,vfat,fat,usbcore df: Filesystem 1K-blocks Used Available Use% Mounted on df: tmpfs 513300 72 513228 0% /dev df: /dev/sdb 244476 40244 204232 16% /hd-media free: total used free shared buffers free: Mem: 1026600 33380 993220 0 200 free: Swap: 0 0 0 free: Total: 1026600 33380 993220 /proc/cmdline: vga=788 initrd=initrd.gz -- quiet BOOT_IMAGE=linux /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 28 /proc/cpuinfo: model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz /proc/cpuinfo: stepping : 2 /proc/cpuinfo: cpu MHz : 1599.814 /proc/cpuinfo: cache size : 512 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 10 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm /proc/cpuinfo: bogomips : 3199.62 /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: cache_alignment : 64 /proc/cpuinfo: address sizes : 32 bits physical, 32 bits virtual /proc/cpuinfo: power management: /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-0060 : keyboard /proc/ioports: 0064-0064 : keyboard /proc/ioports: 0070-0071 : rtc0 /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : ide_generic /proc/ioports: 01f0-01f7 : ide_generic /proc/ioports: 025c-025f : pnp 00:08 /proc/ioports: 0376-0376 : ide_generic /proc/ioports: 0380-0383 : pnp 00:08 /proc/ioports: 03c0-03df : vesafb /proc/ioports: 03f6-03f6 : ide_generic /proc/ioports: 0400-041f : pnp 00:08 /proc/ioports: 0480-04bf : 0000:00:1f.0 /proc/ioports: 0480-04bf : pnp 00:08 /proc/ioports: 04d0-04d1 : pnp 00:08 /proc/ioports: 0800-087f : 0000:00:1f.0 /proc/ioports: 0800-087f : pnp 00:08 /proc/ioports: 0800-0803 : ACPI PM1a_EVT_BLK /proc/ioports: 0804-0805 : ACPI PM1a_CNT_BLK /proc/ioports: 0808-080b : ACPI PM_TMR /proc/ioports: 0820-0820 : ACPI PM2_CNT_BLK /proc/ioports: 0828-082f : ACPI GPE0_BLK /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: 1000-1fff : PCI Bus 0000:04 /proc/ioports: 2000-2fff : PCI Bus 0000:02 /proc/ioports: c800-c80f : 0000:00:1f.2 /proc/ioports: c800-c80f : ahci /proc/ioports: c880-c883 : 0000:00:1f.2 /proc/ioports: c880-c883 : ahci /proc/ioports: cc00-cc07 : 0000:00:1f.2 /proc/ioports: cc00-cc07 : ahci /proc/ioports: d000-d003 : 0000:00:1f.2 /proc/ioports: d000-d003 : ahci /proc/ioports: d080-d087 : 0000:00:1f.2 /proc/ioports: d080-d087 : ahci /proc/ioports: d400-d41f : 0000:00:1d.0 /proc/ioports: d400-d41f : uhci_hcd /proc/ioports: d480-d49f : 0000:00:1d.1 /proc/ioports: d480-d49f : uhci_hcd /proc/ioports: d800-d81f : 0000:00:1d.2 /proc/ioports: d800-d81f : uhci_hcd /proc/ioports: d880-d89f : 0000:00:1d.3 /proc/ioports: d880-d89f : uhci_hcd /proc/ioports: dc00-dc07 : 0000:00:02.0 /proc/ioports: e000-efff : PCI Bus 0000:01 /proc/ioports: ec00-ec7f : 0000:01:00.0 /proc/iomem: 00000000-0000ffff : reserved /proc/iomem: 00010000-0009fbff : System RAM /proc/iomem: 0009fc00-0009ffff : reserved /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000c7fff : Video ROM /proc/iomem: 000e2000-000fffff : reserved /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-3f79ffff : System RAM /proc/iomem: 01000000-01247e7e : Kernel code /proc/iomem: 01247e7f-01363a7f : Kernel data /proc/iomem: 013d1000-0144da27 : Kernel bss /proc/iomem: 3f7a0000-3f7adfff : ACPI Tables /proc/iomem: 3f7ae000-3f7effff : ACPI Non-volatile Storage /proc/iomem: 3f7f0000-3f7fffff : reserved /proc/iomem: 3f800000-3fffffff : RAM buffer /proc/iomem: 40000000-401fffff : PCI Bus 0000:04 /proc/iomem: 40200000-403fffff : PCI Bus 0000:04 /proc/iomem: 40400000-405fffff : PCI Bus 0000:01 /proc/iomem: 8c000000-8c01ffff : pnp 00:08 /proc/iomem: d0000000-dfffffff : 0000:00:02.0 /proc/iomem: d0000000-d07affff : vesafb /proc/iomem: e0000000-e3ffffff : PCI MMCONFIG 0 [00-3f] /proc/iomem: e0000000-e3ffffff : pnp 00:0b /proc/iomem: f0000000-f6ffffff : PCI Bus 0000:02 /proc/iomem: f7db7800-f7db7bff : 0000:00:1f.2 /proc/iomem: f7db7800-f7db7bff : ahci /proc/iomem: f7db7c00-f7db7fff : 0000:00:1d.7 /proc/iomem: f7db7c00-f7db7fff : ehci_hcd /proc/iomem: f7db8000-f7dbbfff : 0000:00:1b.0 /proc/iomem: f7dc0000-f7dfffff : 0000:00:02.0 /proc/iomem: f7e00000-f7e7ffff : 0000:00:02.0 /proc/iomem: f7e80000-f7efffff : 0000:00:02.1 /proc/iomem: f7f00000-f7ffffff : PCI Bus 0000:01 /proc/iomem: f7fc0000-f7ffffff : 0000:01:00.0 /proc/iomem: f8000000-fbffffff : PCI Bus 0000:02 /proc/iomem: fbff0000-fbffffff : 0000:02:00.0 /proc/iomem: fec00000-fec00fff : IOAPIC 0 /proc/iomem: fed00000-fed003ff : HPET 0 /proc/iomem: fed13000-fed19fff : pnp 00:01 /proc/iomem: fed1c000-fed1ffff : pnp 00:08 /proc/iomem: fed20000-fed3ffff : pnp 00:08 /proc/iomem: fed50000-fed8ffff : pnp 00:08 /proc/iomem: fee00000-fee00fff : Local APIC /proc/iomem: fee00000-fee00fff : reserved /proc/iomem: fee00000-fee00fff : pnp 00:0a /proc/iomem: ffb00000-ffbfffff : pnp 00:08 /proc/iomem: fff80000-ffffffff : reserved /proc/interrupts: CPU0 /proc/interrupts: 0: 23376 IO-APIC-edge timer /proc/interrupts: 1: 1159 IO-APIC-edge i8042 /proc/interrupts: 8: 1 IO-APIC-edge rtc0 /proc/interrupts: 9: 17 IO-APIC-fasteoi acpi /proc/interrupts: 12: 2 IO-APIC-edge i8042 /proc/interrupts: 14: 0 IO-APIC-edge ide0 /proc/interrupts: 15: 0 IO-APIC-edge ide1 /proc/interrupts: 16: 0 IO-APIC-fasteoi uhci_hcd:usb5 /proc/interrupts: 18: 0 IO-APIC-fasteoi uhci_hcd:usb4 /proc/interrupts: 19: 0 IO-APIC-fasteoi uhci_hcd:usb3 /proc/interrupts: 23: 693 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 /proc/interrupts: 27: 8956 PCI-MSI-edge ahci /proc/interrupts: NMI: 0 Non-maskable interrupts /proc/interrupts: LOC: 22888 Local timer interrupts /proc/interrupts: SPU: 0 Spurious interrupts /proc/interrupts: PMI: 0 Performance monitoring interrupts /proc/interrupts: PND: 0 Performance pending work /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 1026600 kB /proc/meminfo: MemFree: 993252 kB /proc/meminfo: Buffers: 200 kB /proc/meminfo: Cached: 15512 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 12980 kB /proc/meminfo: Inactive: 6696 kB /proc/meminfo: Active(anon): 4036 kB /proc/meminfo: Inactive(anon): 0 kB /proc/meminfo: Active(file): 8944 kB /proc/meminfo: Inactive(file): 6696 kB /proc/meminfo: Unevictable: 0 kB /proc/meminfo: Mlocked: 0 kB /proc/meminfo: HighTotal: 130696 kB /proc/meminfo: HighFree: 109788 kB /proc/meminfo: LowTotal: 895904 kB /proc/meminfo: LowFree: 883464 kB /proc/meminfo: SwapTotal: 0 kB /proc/meminfo: SwapFree: 0 kB /proc/meminfo: Dirty: 0 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 3992 kB /proc/meminfo: Mapped: 1552 kB /proc/meminfo: Shmem: 72 kB /proc/meminfo: Slab: 9048 kB /proc/meminfo: SReclaimable: 6620 kB /proc/meminfo: SUnreclaim: 2428 kB /proc/meminfo: KernelStack: 440 kB /proc/meminfo: PageTables: 332 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 513300 kB /proc/meminfo: Committed_AS: 7648 kB /proc/meminfo: VmallocTotal: 122880 kB /proc/meminfo: VmallocUsed: 3968 kB /proc/meminfo: VmallocChunk: 117604 kB /proc/meminfo: HugePages_Total: 0 /proc/meminfo: HugePages_Free: 0 /proc/meminfo: HugePages_Rsvd: 0 /proc/meminfo: HugePages_Surp: 0 /proc/meminfo: Hugepagesize: 4096 kB /proc/meminfo: DirectMap4k: 16376 kB /proc/meminfo: DirectMap4M: 892928 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/devices/platform/i8042/serio0/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [ ] Configure network: [ ] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system: [ ] Clock/timezone setup: [ ] User/password setup: [ ] Install tasks: [ ] Install boot loader: [ ] Overall install: [E] Comments/Problems: The installer failed to find the mini.iso on the thumb drive. I'd followed the install guide and zcat'd the boot.img.gz onto the iso (from an Ubuntu machine), unmounted the drive and then copied the mini.iso into the root of the thumb drive. Note the install guide says 'and copy a Debian netinst or businesscard ISO image to it' and doesn't say where, so I assume the root of the thumb was as good a place as any. The installer went through all the drives (I have a lot of partitions on sda) and I did see it try sdb, but it still said it couldn't find it. I tried repeatedly, including renaming the mini.iso to mini.ISO and back, and mounting the iso from the shell onto /cdrom - it mounted fine, but the installer couldn't find it. Syslog from save-logs included below, hardware-summary above. Nov 7 15:44:00 syslogd started: BusyBox v1.17.1 Nov 7 15:44:00 kernel: klogd started: BusyBox v1.17.1 (Debian 1:1.17.1-4) Nov 7 15:44:00 kernel: [ 0.000000] Initializing cgroup subsys cpuset Nov 7 15:44:00 kernel: [ 0.000000] Initializing cgroup subsys cpu Nov 7 15:44:00 kernel: [ 0.000000] Linux version 2.6.32-5-486 (Debian 2.6.32-25) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Thu Oct 14 16:56:52 UTC 2010 Nov 7 15:44:00 kernel: [ 0.000000] KERNEL supported cpus: Nov 7 15:44:00 kernel: [ 0.000000] Intel GenuineIntel Nov 7 15:44:00 kernel: [ 0.000000] AMD AuthenticAMD Nov 7 15:44:00 kernel: [ 0.000000] NSC Geode by NSC Nov 7 15:44:00 kernel: [ 0.000000] Cyrix CyrixInstead Nov 7 15:44:00 kernel: [ 0.000000] Centaur CentaurHauls Nov 7 15:44:00 kernel: [ 0.000000] Transmeta GenuineTMx86 Nov 7 15:44:00 kernel: [ 0.000000] Transmeta TransmetaCPU Nov 7 15:44:00 kernel: [ 0.000000] UMC UMC UMC UMC Nov 7 15:44:00 kernel: [ 0.000000] BIOS-provided physical RAM map: Nov 7 15:44:00 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Nov 7 15:44:00 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Nov 7 15:44:00 kernel: [ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved) Nov 7 15:44:00 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable) Nov 7 15:44:00 kernel: [ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data) Nov 7 15:44:00 kernel: [ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS) Nov 7 15:44:00 kernel: [ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) Nov 7 15:44:00 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Nov 7 15:44:00 kernel: [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Nov 7 15:44:00 kernel: [ 0.000000] DMI present. Nov 7 15:44:00 kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. Nov 7 15:44:00 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Nov 7 15:44:00 kernel: [ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x100000 Nov 7 15:44:00 kernel: [ 0.000000] MTRR default type: uncachable Nov 7 15:44:00 kernel: [ 0.000000] MTRR fixed ranges enabled: Nov 7 15:44:00 kernel: [ 0.000000] 00000-9FFFF write-back Nov 7 15:44:00 kernel: [ 0.000000] A0000-DFFFF uncachable Nov 7 15:44:00 kernel: [ 0.000000] E0000-EFFFF write-through Nov 7 15:44:00 kernel: [ 0.000000] F0000-FFFFF write-protect Nov 7 15:44:00 kernel: [ 0.000000] MTRR variable ranges enabled: Nov 7 15:44:00 kernel: [ 0.000000] 0 base 000000000 mask 0C0000000 write-back Nov 7 15:44:00 kernel: [ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable Nov 7 15:44:00 kernel: [ 0.000000] 2 disabled Nov 7 15:44:00 kernel: [ 0.000000] 3 disabled Nov 7 15:44:00 kernel: [ 0.000000] 4 disabled Nov 7 15:44:00 kernel: [ 0.000000] 5 disabled Nov 7 15:44:00 kernel: [ 0.000000] 6 disabled Nov 7 15:44:00 kernel: [ 0.000000] 7 disabled Nov 7 15:44:00 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Nov 7 15:44:00 kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Nov 7 15:44:00 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 Nov 7 15:44:00 kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Nov 7 15:44:00 kernel: [ 0.000000] 0000400000 - 0037400000 page 2M Nov 7 15:44:00 kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k Nov 7 15:44:00 kernel: [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 Nov 7 15:44:00 kernel: [ 0.000000] RAMDISK: 3f2d7000 - 3f79e266 Nov 7 15:44:00 kernel: [ 0.000000] Allocated new RAMDISK: 00100000 - 005c7266 Nov 7 15:44:00 kernel: [ 0.000000] Move RAMDISK from 000000003f2d7000 - 000000003f79e265 to 00100000 - 005c7265 Nov 7 15:44:00 kernel: [ 0.000000] ACPI: RSDP 000fb9e0 00014 (v00 ACPIAM) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: RSDT 3f7a0000 0003C (v01 A_M_I_ OEMRSDT 01001005 MSFT 00000097) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 01001005 MSFT 00000097) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: DSDT 3f7a0430 080A2 (v01 A1311 A1311000 00000000 INTL 20051117) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: FACS 3f7ae000 00040 Nov 7 15:44:00 kernel: [ 0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 01001005 MSFT 00000097) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 01001005 MSFT 00000097) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 01001005 MSFT 00000097) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: HPET 3f7a84e0 00038 (v01 A_M_I_ OEMHPET 01001005 MSFT 00000097) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: SSDT 3f7aeb80 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Nov 7 15:44:00 kernel: [ 0.000000] 127MB HIGHMEM available. Nov 7 15:44:00 kernel: [ 0.000000] 887MB LOWMEM available. Nov 7 15:44:00 kernel: [ 0.000000] mapped low ram: 0 - 377fe000 Nov 7 15:44:00 kernel: [ 0.000000] low ram: 0 - 377fe000 Nov 7 15:44:00 kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000 Nov 7 15:44:00 kernel: [ 0.000000] node 0 bootmap 00011000 - 00017f00 Nov 7 15:44:00 kernel: [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00377fe000] Nov 7 15:44:00 kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Nov 7 15:44:00 kernel: [ 0.000000] #1 [0001000000 - 000144da28] TEXT DATA BSS ==> [0001000000 - 000144da28] Nov 7 15:44:00 kernel: [ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] Nov 7 15:44:00 kernel: [ 0.000000] #3 [000144e000 - 00014541e0] BRK ==> [000144e000 - 00014541e0] Nov 7 15:44:00 kernel: [ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] Nov 7 15:44:00 kernel: [ 0.000000] #5 [0000100000 - 00005c7266] NEW RAMDISK ==> [0000100000 - 00005c7266] Nov 7 15:44:00 kernel: [ 0.000000] #6 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] Nov 7 15:44:00 kernel: [ 0.000000] found SMP MP-table at [c00ff780] ff780 Nov 7 15:44:00 kernel: [ 0.000000] Zone PFN ranges: Nov 7 15:44:00 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Nov 7 15:44:00 kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe Nov 7 15:44:00 kernel: [ 0.000000] HighMem 0x000377fe -> 0x0003f7a0 Nov 7 15:44:00 kernel: [ 0.000000] Movable zone start PFN for each node Nov 7 15:44:00 kernel: [ 0.000000] early_node_map[2] active PFN ranges Nov 7 15:44:00 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Nov 7 15:44:00 kernel: [ 0.000000] 0: 0x00000100 -> 0x0003f7a0 Nov 7 15:44:00 kernel: [ 0.000000] On node 0 totalpages: 259887 Nov 7 15:44:00 kernel: [ 0.000000] free_area_init_node: node 0, pgdat c135ca44, node_mem_map c1456200 Nov 7 15:44:00 kernel: [ 0.000000] DMA zone: 32 pages used for memmap Nov 7 15:44:00 kernel: [ 0.000000] DMA zone: 0 pages reserved Nov 7 15:44:00 kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Nov 7 15:44:00 kernel: [ 0.000000] Normal zone: 1744 pages used for memmap Nov 7 15:44:00 kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 Nov 7 15:44:00 kernel: [ 0.000000] HighMem zone: 256 pages used for memmap Nov 7 15:44:00 kernel: [ 0.000000] HighMem zone: 32418 pages, LIFO batch:7 Nov 7 15:44:00 kernel: [ 0.000000] Using APIC driver default Nov 7 15:44:00 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Nov 7 15:44:00 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Nov 7 15:44:00 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. Nov 7 15:44:00 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Nov 7 15:44:00 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Nov 7 15:44:00 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Nov 7 15:44:00 kernel: [ 0.000000] ACPI: IRQ0 used by override. Nov 7 15:44:00 kernel: [ 0.000000] ACPI: IRQ2 used by override. Nov 7 15:44:00 kernel: [ 0.000000] ACPI: IRQ9 used by override. Nov 7 15:44:00 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Nov 7 15:44:00 kernel: [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 Nov 7 15:44:00 kernel: [ 0.000000] nr_irqs_gsi: 24 Nov 7 15:44:00 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Nov 7 15:44:00 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 Nov 7 15:44:00 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 Nov 7 15:44:00 kernel: [ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000) Nov 7 15:44:00 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Nov 7 15:44:00 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257855 Nov 7 15:44:00 kernel: [ 0.000000] Kernel command line: vga=788 initrd=initrd.gz -- quiet BOOT_IMAGE=linux Nov 7 15:44:00 kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Nov 7 15:44:00 kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Nov 7 15:44:00 kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Nov 7 15:44:00 kernel: [ 0.000000] Enabling fast FPU save and restore... done. Nov 7 15:44:00 kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Nov 7 15:44:00 kernel: [ 0.000000] Initializing CPU#0 Nov 7 15:44:00 kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7a0) Nov 7 15:44:00 kernel: [ 0.000000] Memory: 1020912k/1040000k available (2335k kernel code, 18280k reserved, 1135k data, 436k init, 130696k highmem) Nov 7 15:44:00 kernel: [ 0.000000] virtual kernel memory layout: Nov 7 15:44:00 kernel: [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB) Nov 7 15:44:00 kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) Nov 7 15:44:00 kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) Nov 7 15:44:00 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) Nov 7 15:44:00 kernel: [ 0.000000] .init : 0xc1364000 - 0xc13d1000 ( 436 kB) Nov 7 15:44:00 kernel: [ 0.000000] .data : 0xc1247e7f - 0xc1363a80 (1135 kB) Nov 7 15:44:00 kernel: [ 0.000000] .text : 0xc1000000 - 0xc1247e7f (2335 kB) Nov 7 15:44:00 kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Nov 7 15:44:00 kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Nov 7 15:44:00 kernel: [ 0.000000] Hierarchical RCU implementation. Nov 7 15:44:00 kernel: [ 0.000000] NR_IRQS:288 Nov 7 15:44:00 kernel: [ 0.000000] Console: colour dummy device 80x25 Nov 7 15:44:00 kernel: [ 0.000000] console [tty0] enabled Nov 7 15:44:00 kernel: [ 0.000000] hpet clockevent registered Nov 7 15:44:00 kernel: [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Nov 7 15:44:00 kernel: [ 0.000000] Fast TSC calibration failed Nov 7 15:44:00 kernel: [ 0.000000] TSC: PIT calibration matches HPET. 1 loops Nov 7 15:44:00 kernel: [ 0.000000] Detected 1599.814 MHz processor. Nov 7 15:44:00 kernel: [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.62 BogoMIPS (lpj=6399256) Nov 7 15:44:00 kernel: [ 0.004033] Security Framework initialized Nov 7 15:44:00 kernel: [ 0.004042] SELinux: Disabled at boot. Nov 7 15:44:00 kernel: [ 0.004054] Mount-cache hash table entries: 512 Nov 7 15:44:00 kernel: [ 0.004220] Initializing cgroup subsys ns Nov 7 15:44:00 kernel: [ 0.004228] Initializing cgroup subsys cpuacct Nov 7 15:44:00 kernel: [ 0.004233] Initializing cgroup subsys devices Nov 7 15:44:00 kernel: [ 0.004238] Initializing cgroup subsys freezer Nov 7 15:44:00 kernel: [ 0.004243] Initializing cgroup subsys net_cls Nov 7 15:44:00 kernel: [ 0.004278] CPU: L1 I cache: 32K, L1 D cache: 24K Nov 7 15:44:00 kernel: [ 0.004284] CPU: L2 cache: 512K Nov 7 15:44:00 kernel: [ 0.004291] using mwait in idle threads. Nov 7 15:44:00 kernel: [ 0.004301] CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 Nov 7 15:44:00 kernel: [ 0.004312] Checking 'hlt' instruction... OK. Nov 7 15:44:00 kernel: [ 0.022182] ACPI: Core revision 20090903 Nov 7 15:44:00 kernel: [ 0.036190] Enabling APIC mode: Flat. Using 1 I/O APICs Nov 7 15:44:00 kernel: [ 0.036595] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Nov 7 15:44:00 kernel: [ 0.080001] APIC calibration not consistent with PM-Timer: 135ms instead of 100ms Nov 7 15:44:00 kernel: [ 0.080001] APIC delta adjusted to PM-Timer: 833238 (1133189) Nov 7 15:44:00 kernel: [ 0.080001] devtmpfs: initialized Nov 7 15:44:00 kernel: [ 0.080001] regulator: core version 0.5 Nov 7 15:44:00 kernel: [ 0.080001] NET: Registered protocol family 16 Nov 7 15:44:00 kernel: [ 0.080001] EISA bus registered Nov 7 15:44:00 kernel: [ 0.080001] ACPI: bus type pci registered Nov 7 15:44:00 kernel: [ 0.080001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 Nov 7 15:44:00 kernel: [ 0.080001] PCI: Not using MMCONFIG. Nov 7 15:44:00 kernel: [ 0.080001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 Nov 7 15:44:00 kernel: [ 0.080001] PCI: Using configuration type 1 for base access Nov 7 15:44:00 kernel: [ 0.080001] bio: create slab <bio-0> at 0 Nov 7 15:44:00 kernel: [ 0.080001] ACPI: EC: Look up EC in DSDT Nov 7 15:44:00 kernel: [ 0.081852] ACPI: BIOS _OSI(Linux) query ignored Nov 7 15:44:00 kernel: [ 0.081953] ACPI Error (dswload-0659): [USB0] Namespace lookup failure, AE_NOT_FOUND Nov 7 15:44:00 kernel: [ 0.081963] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230) Nov 7 15:44:00 kernel: [ 0.081974] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14457bc), AE_NOT_FOUND Nov 7 15:44:00 kernel: [ 0.082064] ACPI: Executed 2 blocks of module-level executable AML code Nov 7 15:44:00 kernel: [ 0.092229] ACPI: Interpreter enabled Nov 7 15:44:00 kernel: [ 0.092238] ACPI: (supports S0 S3 S4 S5) Nov 7 15:44:00 kernel: [ 0.092287] ACPI: Using IOAPIC for interrupt routing Nov 7 15:44:00 kernel: [ 0.092383] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 Nov 7 15:44:00 kernel: [ 0.096166] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources Nov 7 15:44:00 kernel: [ 0.096172] PCI: Using MMCONFIG for extended config space Nov 7 15:44:00 kernel: [ 0.107868] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 Nov 7 15:44:00 kernel: [ 0.108258] ACPI: No dock devices found. Nov 7 15:44:00 kernel: [ 0.108507] ACPI: PCI Root Bridge [PCI0] (0000:00) Nov 7 15:44:00 kernel: [ 0.108641] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7e00000-0xf7e7ffff] Nov 7 15:44:00 kernel: [ 0.108651] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07] Nov 7 15:44:00 kernel: [ 0.108660] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] Nov 7 15:44:00 kernel: [ 0.108669] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7dc0000-0xf7dfffff] Nov 7 15:44:00 kernel: [ 0.108718] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7e80000-0xf7efffff] Nov 7 15:44:00 kernel: [ 0.108852] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7db8000-0xf7dbbfff] Nov 7 15:44:00 kernel: [ 0.108926] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Nov 7 15:44:00 kernel: [ 0.108934] pci 0000:00:1b.0: PME# disabled Nov 7 15:44:00 kernel: [ 0.109045] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Nov 7 15:44:00 kernel: [ 0.109053] pci 0000:00:1c.0: PME# disabled Nov 7 15:44:00 kernel: [ 0.109167] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Nov 7 15:44:00 kernel: [ 0.109175] pci 0000:00:1c.1: PME# disabled Nov 7 15:44:00 kernel: [ 0.109294] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Nov 7 15:44:00 kernel: [ 0.109302] pci 0000:00:1c.3: PME# disabled Nov 7 15:44:00 kernel: [ 0.109383] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f] Nov 7 15:44:00 kernel: [ 0.109464] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f] Nov 7 15:44:00 kernel: [ 0.109544] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f] Nov 7 15:44:00 kernel: [ 0.109624] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f] Nov 7 15:44:00 kernel: [ 0.109710] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7db7c00-0xf7db7fff] Nov 7 15:44:00 kernel: [ 0.109784] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Nov 7 15:44:00 kernel: [ 0.109792] pci 0000:00:1d.7: PME# disabled Nov 7 15:44:00 kernel: [ 0.109984] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO Nov 7 15:44:00 kernel: [ 0.109992] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO Nov 7 15:44:00 kernel: [ 0.109999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003) Nov 7 15:44:00 kernel: [ 0.110007] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) Nov 7 15:44:00 kernel: [ 0.110015] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007) Nov 7 15:44:00 kernel: [ 0.110105] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087] Nov 7 15:44:00 kernel: [ 0.110118] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003] Nov 7 15:44:00 kernel: [ 0.110129] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07] Nov 7 15:44:00 kernel: [ 0.110141] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883] Nov 7 15:44:00 kernel: [ 0.110153] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f] Nov 7 15:44:00 kernel: [ 0.110166] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7db7800-0xf7db7bff] Nov 7 15:44:00 kernel: [ 0.110210] pci 0000:00:1f.2: PME# supported from D3hot Nov 7 15:44:00 kernel: [ 0.110217] pci 0000:00:1f.2: PME# disabled Nov 7 15:44:00 kernel: [ 0.110405] pci 0000:02:00.0: reg 10 32bit mmio: [0xfbff0000-0xfbffffff] Nov 7 15:44:00 kernel: [ 0.116157] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xfbffffff] Nov 7 15:44:00 kernel: [ 0.116170] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff] Nov 7 15:44:00 kernel: [ 0.116256] pci 0000:01:00.0: reg 10 64bit mmio: [0xf7fc0000-0xf7ffffff] Nov 7 15:44:00 kernel: [ 0.116271] pci 0000:01:00.0: reg 18 io port: [0xec00-0xec7f] Nov 7 15:44:00 kernel: [ 0.116361] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold Nov 7 15:44:00 kernel: [ 0.116370] pci 0000:01:00.0: PME# disabled Nov 7 15:44:00 kernel: [ 0.124128] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff] Nov 7 15:44:00 kernel: [ 0.124137] pci 0000:00:1c.3: bridge 32bit mmio: [0xf7f00000-0xf7ffffff] Nov 7 15:44:00 kernel: [ 0.124213] pci 0000:00:1e.0: transparent bridge Nov 7 15:44:00 kernel: [ 0.124258] pci_bus 0000:00: on NUMA node 0 Nov 7 15:44:00 kernel: [ 0.124270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Nov 7 15:44:00 kernel: [ 0.124582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] Nov 7 15:44:00 kernel: [ 0.124676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] Nov 7 15:44:00 kernel: [ 0.146435] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15) Nov 7 15:44:00 kernel: [ 0.146669] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Nov 7 15:44:00 kernel: [ 0.146901] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Nov 7 15:44:00 kernel: [ 0.147133] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) Nov 7 15:44:00 kernel: [ 0.147364] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Nov 7 15:44:00 kernel: [ 0.147597] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Nov 7 15:44:00 kernel: [ 0.147830] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) Nov 7 15:44:00 kernel: [ 0.148072] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) Nov 7 15:44:00 kernel: [ 0.148284] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Nov 7 15:44:00 kernel: [ 0.148302] vgaarb: loaded Nov 7 15:44:00 kernel: [ 0.148430] PCI: Using ACPI for IRQ routing Nov 7 15:44:00 kernel: [ 0.148819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Nov 7 15:44:00 kernel: [ 0.148830] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Nov 7 15:44:00 kernel: [ 0.152034] Switching to clocksource tsc Nov 7 15:44:00 kernel: [ 0.153859] pnp: PnP ACPI init Nov 7 15:44:00 kernel: [ 0.153888] ACPI: bus type pnp registered Nov 7 15:44:00 kernel: [ 0.157764] pnp: PnP ACPI: found 13 devices Nov 7 15:44:00 kernel: [ 0.157769] ACPI: ACPI bus type pnp unregistered Nov 7 15:44:00 kernel: [ 0.157777] PnPBIOS: Disabled by ACPI PNP Nov 7 15:44:00 kernel: [ 0.157801] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved Nov 7 15:44:00 kernel: [ 0.157819] system 00:08: ioport range 0x25c-0x25f has been reserved Nov 7 15:44:00 kernel: [ 0.157826] system 00:08: ioport range 0x380-0x383 has been reserved Nov 7 15:44:00 kernel: [ 0.157833] system 00:08: ioport range 0x400-0x41f has been reserved Nov 7 15:44:00 kernel: [ 0.157840] system 00:08: ioport range 0x4d0-0x4d1 has been reserved Nov 7 15:44:00 kernel: [ 0.157847] system 00:08: ioport range 0x800-0x87f has been reserved Nov 7 15:44:00 kernel: [ 0.157854] system 00:08: ioport range 0x480-0x4bf has been reserved Nov 7 15:44:00 kernel: [ 0.157861] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved Nov 7 15:44:00 kernel: [ 0.157869] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved Nov 7 15:44:00 kernel: [ 0.157876] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved Nov 7 15:44:00 kernel: [ 0.157883] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved Nov 7 15:44:00 kernel: [ 0.157890] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved Nov 7 15:44:00 kernel: [ 0.157898] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved Nov 7 15:44:00 kernel: [ 0.157911] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved Nov 7 15:44:00 kernel: [ 0.157918] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved Nov 7 15:44:00 kernel: [ 0.157930] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved Nov 7 15:44:00 kernel: [ 0.157943] system 00:0c: iomem range 0x0-0x9ffff could not be reserved Nov 7 15:44:00 kernel: [ 0.157950] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved Nov 7 15:44:00 kernel: [ 0.157957] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved Nov 7 15:44:00 kernel: [ 0.157964] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved Nov 7 15:44:00 kernel: [ 0.192963] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 Nov 7 15:44:00 kernel: [ 0.192971] pci 0000:00:1c.0: IO window: 0x1000-0x1fff Nov 7 15:44:00 kernel: [ 0.192981] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff Nov 7 15:44:00 kernel: [ 0.192990] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff Nov 7 15:44:00 kernel: [ 0.193002] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 Nov 7 15:44:00 kernel: [ 0.193009] pci 0000:00:1c.1: IO window: 0x2000-0x2fff Nov 7 15:44:00 kernel: [ 0.193019] pci 0000:00:1c.1: MEM window: 0xf8000000-0xfbffffff Nov 7 15:44:00 kernel: [ 0.193027] pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f6ffffff Nov 7 15:44:00 kernel: [ 0.193040] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01 Nov 7 15:44:00 kernel: [ 0.193046] pci 0000:00:1c.3: IO window: 0xe000-0xefff Nov 7 15:44:00 kernel: [ 0.193056] pci 0000:00:1c.3: MEM window: 0xf7f00000-0xf7ffffff Nov 7 15:44:00 kernel: [ 0.193064] pci 0000:00:1c.3: PREFETCH window: 0x00000040400000-0x000000405fffff Nov 7 15:44:00 kernel: [ 0.193077] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 Nov 7 15:44:00 kernel: [ 0.193081] pci 0000:00:1e.0: IO window: disabled Nov 7 15:44:00 kernel: [ 0.193090] pci 0000:00:1e.0: MEM window: disabled Nov 7 15:44:00 kernel: [ 0.193097] pci 0000:00:1e.0: PREFETCH window: disabled Nov 7 15:44:00 kernel: [ 0.193120] pci 0000:00:1c.0: enabling device (0104 -> 0107) Nov 7 15:44:00 kernel: [ 0.193135] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 7 15:44:00 kernel: [ 0.193145] pci 0000:00:1c.0: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 0.193160] pci 0000:00:1c.1: enabling device (0106 -> 0107) Nov 7 15:44:00 kernel: [ 0.193169] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Nov 7 15:44:00 kernel: [ 0.193178] pci 0000:00:1c.1: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 0.193195] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Nov 7 15:44:00 kernel: [ 0.193203] pci 0000:00:1c.3: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 0.193216] pci 0000:00:1e.0: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 0.193225] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Nov 7 15:44:00 kernel: [ 0.193231] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Nov 7 15:44:00 kernel: [ 0.193237] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff] Nov 7 15:44:00 kernel: [ 0.193243] pci_bus 0000:04: resource 1 mem: [0x40000000-0x401fffff] Nov 7 15:44:00 kernel: [ 0.193249] pci_bus 0000:04: resource 2 pref mem [0x40200000-0x403fffff] Nov 7 15:44:00 kernel: [ 0.193256] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] Nov 7 15:44:00 kernel: [ 0.193261] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff] Nov 7 15:44:00 kernel: [ 0.193267] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf6ffffff] Nov 7 15:44:00 kernel: [ 0.193274] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] Nov 7 15:44:00 kernel: [ 0.193280] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff] Nov 7 15:44:00 kernel: [ 0.193286] pci_bus 0000:01: resource 2 pref mem [0x40400000-0x405fffff] Nov 7 15:44:00 kernel: [ 0.193292] pci_bus 0000:05: resource 3 io: [0x00-0xffff] Nov 7 15:44:00 kernel: [ 0.193298] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] Nov 7 15:44:00 kernel: [ 0.193359] NET: Registered protocol family 2 Nov 7 15:44:00 kernel: [ 0.193526] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Nov 7 15:44:00 kernel: [ 0.194122] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Nov 7 15:44:00 kernel: [ 0.195064] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Nov 7 15:44:00 kernel: [ 0.195306] TCP: Hash tables configured (established 131072 bind 65536) Nov 7 15:44:00 kernel: [ 0.195312] TCP reno registered Nov 7 15:44:00 kernel: [ 0.195478] NET: Registered protocol family 1 Nov 7 15:44:00 kernel: [ 0.195523] pci 0000:00:02.0: Boot video device Nov 7 15:44:00 kernel: [ 0.195751] Unpacking initramfs... Nov 7 15:44:00 kernel: [ 0.443164] Freeing initrd memory: 4892k freed Nov 7 15:44:00 kernel: [ 0.448280] audit: initializing netlink socket (disabled) Nov 7 15:44:00 kernel: [ 0.448304] type=2000 audit(1289144636.447:1): initialized Nov 7 15:44:00 kernel: [ 0.453842] highmem bounce pool size: 64 pages Nov 7 15:44:00 kernel: [ 0.453855] HugeTLB registered 4 MB page size, pre-allocated 0 pages Nov 7 15:44:00 kernel: [ 0.456920] VFS: Disk quotas dquot_6.5.2 Nov 7 15:44:00 kernel: [ 0.457035] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Nov 7 15:44:00 kernel: [ 0.457162] msgmni has been set to 1748 Nov 7 15:44:00 kernel: [ 0.457479] alg: No test for stdrng (krng) Nov 7 15:44:00 kernel: [ 0.457590] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Nov 7 15:44:00 kernel: [ 0.457596] io scheduler noop registered Nov 7 15:44:00 kernel: [ 0.457601] io scheduler anticipatory registered Nov 7 15:44:00 kernel: [ 0.457605] io scheduler deadline registered Nov 7 15:44:00 kernel: [ 0.457684] io scheduler cfq registered (default) Nov 7 15:44:00 kernel: [ 0.457896] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X Nov 7 15:44:00 kernel: [ 0.457913] pcieport 0000:00:1c.0: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 0.458140] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X Nov 7 15:44:00 kernel: [ 0.458155] pcieport 0000:00:1c.1: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 0.458372] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X Nov 7 15:44:00 kernel: [ 0.458387] pcieport 0000:00:1c.3: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 0.458747] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1875k, total 7872k Nov 7 15:44:00 kernel: [ 0.458755] vesafb: mode is 800x600x16, linelength=1600, pages=7 Nov 7 15:44:00 kernel: [ 0.458759] vesafb: scrolling: redraw Nov 7 15:44:00 kernel: [ 0.458765] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Nov 7 15:44:00 kernel: [ 0.472048] Console: switching to colour frame buffer device 100x37 Nov 7 15:44:00 kernel: [ 0.484976] fb0: VESA VGA frame buffer device Nov 7 15:44:00 kernel: [ 0.485062] isapnp: Scanning for PnP cards... Nov 7 15:44:00 kernel: [ 0.795375] isapnp: No Plug & Play device found Nov 7 15:44:00 kernel: [ 0.798557] Linux agpgart interface v0.103 Nov 7 15:44:00 kernel: [ 0.798698] agpgart-intel 0000:00:00.0: Intel 945GME Chipset Nov 7 15:44:00 kernel: [ 0.798865] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Nov 7 15:44:00 kernel: [ 0.801475] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Nov 7 15:44:00 kernel: [ 0.801619] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Nov 7 15:44:00 kernel: [ 0.802329] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Nov 7 15:44:00 kernel: [ 0.821507] serio: i8042 KBD port at 0x60,0x64 irq 1 Nov 7 15:44:00 kernel: [ 0.821520] serio: i8042 AUX port at 0x60,0x64 irq 12 Nov 7 15:44:00 kernel: [ 0.821722] mice: PS/2 mouse device common for all mice Nov 7 15:44:00 kernel: [ 0.823015] rtc_cmos 00:03: RTC can wake from S4 Nov 7 15:44:00 kernel: [ 0.823085] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Nov 7 15:44:00 kernel: [ 0.823124] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs Nov 7 15:44:00 kernel: [ 0.823198] EISA: Probing bus 0 at eisa.0 Nov 7 15:44:00 kernel: [ 0.823207] Cannot allocate resource for EISA slot 1 Nov 7 15:44:00 kernel: [ 0.823212] Cannot allocate resource for EISA slot 2 Nov 7 15:44:00 kernel: [ 0.823240] EISA: Detected 0 cards. Nov 7 15:44:00 kernel: [ 0.823246] cpuidle: using governor ladder Nov 7 15:44:00 kernel: [ 0.823250] cpuidle: using governor menu Nov 7 15:44:00 kernel: [ 0.823259] No iBFT detected. Nov 7 15:44:00 kernel: [ 0.824116] TCP cubic registered Nov 7 15:44:00 kernel: [ 0.824433] NET: Registered protocol family 10 Nov 7 15:44:00 kernel: [ 0.825351] lo: Disabled Privacy Extensions Nov 7 15:44:00 kernel: [ 0.826046] Mobile IPv6 Nov 7 15:44:00 kernel: [ 0.826052] NET: Registered protocol family 17 Nov 7 15:44:00 kernel: [ 0.826066] Using IPI Shortcut mode Nov 7 15:44:00 kernel: [ 0.826229] PM: Resume from disk failed. Nov 7 15:44:00 kernel: [ 0.826250] registered taskstats version 1 Nov 7 15:44:00 kernel: [ 0.826812] rtc_cmos 00:03: setting system clock to 2010-11-07 15:43:57 UTC (1289144637) Nov 7 15:44:00 kernel: [ 0.826883] Initalizing network drop monitor service Nov 7 15:44:00 kernel: [ 0.826927] Freeing unused kernel memory: 436k freed Nov 7 15:44:00 kernel: [ 0.827274] Write protecting the kernel text: 2336k Nov 7 15:44:00 kernel: [ 0.827307] Write protecting the kernel read-only data: 884k Nov 7 15:44:00 kernel: [ 0.840081] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Nov 7 15:44:00 kernel: [ 1.828509] SCSI subsystem initialized Nov 7 15:44:00 kernel: [ 1.854654] usbcore: registered new interface driver usbfs Nov 7 15:44:00 kernel: [ 1.854963] usbcore: registered new interface driver hub Nov 7 15:44:00 kernel: [ 1.900927] usbcore: registered new device driver usb Nov 7 15:44:00 kernel: [ 1.911530] libata version 3.00 loaded. Nov 7 15:44:00 kernel: [ 1.923233] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Nov 7 15:44:00 kernel: [ 1.923292] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Nov 7 15:44:00 kernel: [ 1.923327] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 1.923334] ehci_hcd 0000:00:1d.7: EHCI Host Controller Nov 7 15:44:00 kernel: [ 1.923370] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Nov 7 15:44:00 kernel: [ 1.923405] ehci_hcd 0000:00:1d.7: using broken periodic workaround Nov 7 15:44:00 kernel: [ 1.923422] ehci_hcd 0000:00:1d.7: debug port 1 Nov 7 15:44:00 kernel: [ 1.927320] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Nov 7 15:44:00 kernel: [ 1.927350] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7db7c00 Nov 7 15:44:00 kernel: [ 1.931538] thermal LNXTHERM:01: registered as thermal_zone0 Nov 7 15:44:00 kernel: [ 1.931553] ACPI: Thermal Zone [TZ00] (63 C) Nov 7 15:44:00 kernel: [ 1.944035] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Nov 7 15:44:00 kernel: [ 1.944099] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Nov 7 15:44:00 kernel: [ 1.944106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 7 15:44:00 kernel: [ 1.944111] usb usb1: Product: EHCI Host Controller Nov 7 15:44:00 kernel: [ 1.944116] usb usb1: Manufacturer: Linux 2.6.32-5-486 ehci_hcd Nov 7 15:44:00 kernel: [ 1.944121] usb usb1: SerialNumber: 0000:00:1d.7 Nov 7 15:44:00 kernel: [ 1.944288] usb usb1: configuration #1 chosen from 1 choice Nov 7 15:44:00 kernel: [ 1.944354] hub 1-0:1.0: USB hub found Nov 7 15:44:00 kernel: [ 1.944370] hub 1-0:1.0: 8 ports detected Nov 7 15:44:00 kernel: [ 1.949351] ahci 0000:00:1f.2: version 3.0 Nov 7 15:44:00 kernel: [ 1.949385] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Nov 7 15:44:00 kernel: [ 1.949454] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X Nov 7 15:44:00 kernel: [ 1.949554] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode Nov 7 15:44:00 kernel: [ 1.949563] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part Nov 7 15:44:00 kernel: [ 1.949572] ahci 0000:00:1f.2: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 1.950292] scsi0 : ahci Nov 7 15:44:00 kernel: [ 1.951005] scsi1 : ahci Nov 7 15:44:00 kernel: [ 1.951613] uhci_hcd: USB Universal Host Controller Interface driver Nov 7 15:44:00 kernel: [ 1.951677] scsi2 : ahci Nov 7 15:44:00 kernel: [ 1.951923] scsi3 : ahci Nov 7 15:44:00 kernel: [ 1.952397] ata1: SATA max UDMA/133 abar m1024@0xf7db7800 port 0xf7db7900 irq 27 Nov 7 15:44:00 kernel: [ 1.952403] ata2: DUMMY Nov 7 15:44:00 kernel: [ 1.952406] ata3: DUMMY Nov 7 15:44:00 kernel: [ 1.952410] ata4: DUMMY Nov 7 15:44:00 kernel: [ 1.952922] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Nov 7 15:44:00 kernel: [ 1.952938] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 1.952945] uhci_hcd 0000:00:1d.0: UHCI Host Controller Nov 7 15:44:00 kernel: [ 1.952970] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Nov 7 15:44:00 kernel: [ 1.953013] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 Nov 7 15:44:00 kernel: [ 1.953090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Nov 7 15:44:00 kernel: [ 1.953096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 7 15:44:00 kernel: [ 1.953101] usb usb2: Product: UHCI Host Controller Nov 7 15:44:00 kernel: [ 1.953106] usb usb2: Manufacturer: Linux 2.6.32-5-486 uhci_hcd Nov 7 15:44:00 kernel: [ 1.953111] usb usb2: SerialNumber: 0000:00:1d.0 Nov 7 15:44:00 kernel: [ 1.953372] usb usb2: configuration #1 chosen from 1 choice Nov 7 15:44:00 kernel: [ 1.953510] hub 2-0:1.0: USB hub found Nov 7 15:44:00 kernel: [ 1.953527] hub 2-0:1.0: 2 ports detected Nov 7 15:44:00 kernel: [ 1.953631] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Nov 7 15:44:00 kernel: [ 1.953645] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 1.953651] uhci_hcd 0000:00:1d.1: UHCI Host Controller Nov 7 15:44:00 kernel: [ 1.953669] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Nov 7 15:44:00 kernel: [ 1.953714] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 Nov 7 15:44:00 kernel: [ 1.953786] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Nov 7 15:44:00 kernel: [ 1.953792] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 7 15:44:00 kernel: [ 1.953797] usb usb3: Product: UHCI Host Controller Nov 7 15:44:00 kernel: [ 1.953802] usb usb3: Manufacturer: Linux 2.6.32-5-486 uhci_hcd Nov 7 15:44:00 kernel: [ 1.953806] usb usb3: SerialNumber: 0000:00:1d.1 Nov 7 15:44:00 kernel: [ 1.954031] usb usb3: configuration #1 chosen from 1 choice Nov 7 15:44:00 kernel: [ 1.954165] hub 3-0:1.0: USB hub found Nov 7 15:44:00 kernel: [ 1.954181] hub 3-0:1.0: 2 ports detected Nov 7 15:44:00 kernel: [ 1.954279] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Nov 7 15:44:00 kernel: [ 1.954292] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 1.954299] uhci_hcd 0000:00:1d.2: UHCI Host Controller Nov 7 15:44:00 kernel: [ 1.954316] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Nov 7 15:44:00 kernel: [ 1.954359] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 Nov 7 15:44:00 kernel: [ 1.954428] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Nov 7 15:44:00 kernel: [ 1.954434] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 7 15:44:00 kernel: [ 1.954439] usb usb4: Product: UHCI Host Controller Nov 7 15:44:00 kernel: [ 1.954444] usb usb4: Manufacturer: Linux 2.6.32-5-486 uhci_hcd Nov 7 15:44:00 kernel: [ 1.954449] usb usb4: SerialNumber: 0000:00:1d.2 Nov 7 15:44:00 kernel: [ 1.954675] usb usb4: configuration #1 chosen from 1 choice Nov 7 15:44:00 kernel: [ 1.954810] hub 4-0:1.0: USB hub found Nov 7 15:44:00 kernel: [ 1.954828] hub 4-0:1.0: 2 ports detected Nov 7 15:44:00 kernel: [ 1.954936] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Nov 7 15:44:00 kernel: [ 1.954950] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Nov 7 15:44:00 kernel: [ 1.954956] uhci_hcd 0000:00:1d.3: UHCI Host Controller Nov 7 15:44:00 kernel: [ 1.954976] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Nov 7 15:44:00 kernel: [ 1.955021] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 Nov 7 15:44:00 kernel: [ 1.955091] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Nov 7 15:44:00 kernel: [ 1.955097] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 7 15:44:00 kernel: [ 1.955102] usb usb5: Product: UHCI Host Controller Nov 7 15:44:00 kernel: [ 1.955107] usb usb5: Manufacturer: Linux 2.6.32-5-486 uhci_hcd Nov 7 15:44:00 kernel: [ 1.955112] usb usb5: SerialNumber: 0000:00:1d.3 Nov 7 15:44:00 kernel: [ 1.955341] usb usb5: configuration #1 chosen from 1 choice Nov 7 15:44:00 kernel: [ 1.955478] hub 5-0:1.0: USB hub found Nov 7 15:44:00 kernel: [ 1.955498] hub 5-0:1.0: 2 ports detected Nov 7 15:44:00 kernel: [ 2.256045] usb 1-2: new high speed USB device using ehci_hcd and address 2 Nov 7 15:44:00 kernel: [ 2.276040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 7 15:44:00 kernel: [ 2.277267] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out Nov 7 15:44:00 kernel: [ 2.424156] usb 1-2: New USB device found, idVendor=13d3, idProduct=5108 Nov 7 15:44:00 kernel: [ 2.424163] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 Nov 7 15:44:00 kernel: [ 2.424169] usb 1-2: Product: USB 2.0 Camera Nov 7 15:44:00 kernel: [ 2.424174] usb 1-2: Manufacturer: Sonix Technology Co., Ltd. Nov 7 15:44:00 kernel: [ 2.424178] usb 1-2: SerialNumber: SN0001 Nov 7 15:44:00 kernel: [ 2.425123] usb 1-2: configuration #1 chosen from 1 choice Nov 7 15:44:00 kernel: [ 2.536030] usb 1-6: new high speed USB device using ehci_hcd and address 3 Nov 7 15:44:00 kernel: [ 2.586741] ata1.00: ATA-8: ST9160301AS, 0001SDM2, max UDMA/133 Nov 7 15:44:00 kernel: [ 2.586748] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) Nov 7 15:44:00 kernel: [ 2.588836] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out Nov 7 15:44:00 kernel: [ 2.589151] ata1.00: configured for UDMA/133 Nov 7 15:44:00 kernel: [ 2.604189] scsi 0:0:0:0: Direct-Access ATA ST9160301AS 0001 PQ: 0 ANSI: 5 Nov 7 15:44:00 kernel: [ 2.639409] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) Nov 7 15:44:00 kernel: [ 2.639532] sd 0:0:0:0: [sda] Write Protect is off Nov 7 15:44:00 kernel: [ 2.639539] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 7 15:44:00 kernel: [ 2.639592] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 7 15:44:00 kernel: [ 2.639879] sda: Nov 7 15:44:00 kernel: [ 2.670400] usb 1-6: New USB device found, idVendor=1307, idProduct=0165 Nov 7 15:44:00 kernel: [ 2.670408] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 7 15:44:00 kernel: [ 2.670414] usb 1-6: Product: USB Mass Storage Device Nov 7 15:44:00 kernel: [ 2.670418] usb 1-6: Manufacturer: USBest Technology Nov 7 15:44:00 kernel: [ 2.670423] usb 1-6: SerialNumber: 09101909021171 Nov 7 15:44:00 kernel: [ 2.670590] usb 1-6: configuration #1 chosen from 1 choice Nov 7 15:44:00 kernel: [ 2.693251] sda1 sda2 sda3 < Nov 7 15:44:00 kernel: [ 2.693770] Initializing USB Mass Storage driver... Nov 7 15:44:00 kernel: [ 2.693948] scsi4 : SCSI emulation for USB Mass Storage devices Nov 7 15:44:00 kernel: [ 2.694219] usbcore: registered new interface driver usb-storage Nov 7 15:44:00 kernel: [ 2.694227] USB Mass Storage support registered. Nov 7 15:44:00 kernel: [ 2.694517] usb-storage: device found at 3 Nov 7 15:44:00 kernel: [ 2.694521] usb-storage: waiting for device to settle before scanning Nov 7 15:44:00 kernel: [ 2.727403] sda5 sda6 sda7 > sda4 Nov 7 15:44:00 kernel: [ 2.797506] sd 0:0:0:0: [sda] Attached SCSI disk Nov 7 15:44:01 init: starting pid 309, tty '': '/sbin/reopen-console /sbin/debian-installer' Nov 7 15:44:01 init: starting pid 312, tty '/dev/tty4': '/usr/bin/tail -f /var/log/syslog' Nov 7 15:44:01 debconf: Setting debconf/language to en Nov 7 15:44:01 main-menu[329]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Nov 7 15:44:02 main-menu[329]: INFO: Menu item 'localechooser' selected Nov 7 15:44:02 debconf: Setting debconf/language to en Nov 7 15:44:03 localechooser: info: Language = 'en' Nov 7 15:44:03 localechooser: info: line=en;0;US;en_US.UTF-8;;console-setup Nov 7 15:44:03 localechooser: info: Set debian-installer/language = 'en' Nov 7 15:44:03 localechooser: info: Default country = 'US' Nov 7 15:44:03 localechooser: info: Default locale = 'en_US.UTF-8' Nov 7 15:44:03 localechooser: info: Set debian-installer/consoledisplay = 'console-setup' Nov 7 15:44:03 debconf: Setting debconf/language to en Nov 7 15:44:04 kernel: [ 7.692163] usb-storage: device scan complete Nov 7 15:44:04 kernel: [ 7.693007] scsi 4:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2 Nov 7 15:44:04 kernel: [ 7.696242] sd 4:0:0:0: [sdb] 7946240 512-byte logical blocks: (4.06 GB/3.78 GiB) Nov 7 15:44:04 kernel: [ 7.696874] sd 4:0:0:0: [sdb] Write Protect is off Nov 7 15:44:04 kernel: [ 7.696882] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00 Nov 7 15:44:04 kernel: [ 7.696887] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 7 15:44:04 kernel: [ 7.700865] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 7 15:44:04 kernel: [ 7.700873] sdb: Nov 7 15:44:04 kernel: [ 8.148744] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 7 15:44:04 kernel: [ 8.148754] sd 4:0:0:0: [sdb] Attached SCSI removable disk Nov 7 15:44:05 localechooser: info: Set debian-installer/country = 'GB' Nov 7 15:44:05 localechooser: info: Set debian-installer/locale = 'en_GB.UTF-8' Nov 7 15:44:05 localechooser: info: System locale (debian-installer/locale) = 'en_GB.UTF-8' Nov 7 15:44:05 localechooser: info: Set debian-installer/language = 'en_GB:en' Nov 7 15:44:05 debconf: Setting debconf/language to en_GB:en Nov 7 15:44:05 main-menu[329]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Nov 7 15:44:05 main-menu[329]: INFO: Menu item 'kbd-chooser' selected Nov 7 15:44:05 main-menu[329]: INFO: Falling back to the package description for console-keymaps-at Nov 7 15:44:05 main-menu[329]: INFO: Falling back to the package description for console-keymaps-at Nov 7 15:44:05 kbd-chooser[1184]: DEBUG: Mounting usbfs to look for kbd Nov 7 15:44:05 kbd-chooser[1184]: DEBUG: Parsing usb/devices file Nov 7 15:44:05 kbd-chooser[1184]: DEBUG: Adding generic entry for AT keymaps Nov 7 15:44:05 kbd-chooser[1184]: INFO: keyboard type at: present: true: Nov 7 15:44:05 kbd-chooser[1184]: INFO: keyboard type at: present: unknown Nov 7 15:44:05 kbd-chooser[1184]: INFO: Setting debian-installer/serial-console to false Nov 7 15:44:05 kbd-chooser[1184]: INFO: Setting debian-installer/uml-console to false Nov 7 15:44:05 kbd-chooser[1184]: INFO: kbd-chooser: arch at selected Nov 7 15:44:06 kbd-chooser[1184]: INFO: choose_keymap: keymap = uk Nov 7 15:44:06 kbd-chooser[1184]: INFO: kbd_chooser: setting keymap uk Nov 7 15:44:06 main-menu[329]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Nov 7 15:44:06 main-menu[329]: INFO: Menu item 'iso-scan' selected Nov 7 15:44:06 main-menu[329]: INFO: Falling back to the package description for loop-modules-2.6.32-5-486-di Nov 7 15:44:06 main-menu[329]: INFO: Falling back to the package description for loop-modules-2.6.32-5-486-di Nov 7 15:44:07 net/hw-detect.hotplug: Detected hotpluggable network interface lo Nov 7 15:44:08 hw-detect: ISA bus detected; loading module 'ide-generic' Nov 7 15:44:08 hw-detect: insmod /lib/modules/2.6.32-5-486/kernel/drivers/ide/ide-core.ko Nov 7 15:44:08 hw-detect: insmod /lib/modules/2.6.32-5-486/kernel/drivers/ide/ide-generic.ko Nov 7 15:44:08 kernel: [ 11.808091] Uniform Multi-Platform E-IDE driver Nov 7 15:44:08 kernel: [ 11.809714] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Nov 7 15:44:08 kernel: [ 11.809735] Probing IDE interface ide0... Nov 7 15:44:08 kernel: [ 11.812718] ide0: no devices on the port Nov 7 15:44:08 kernel: [ 11.813350] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Nov 7 15:44:08 kernel: [ 11.813382] Probing IDE interface ide1... Nov 7 15:44:08 kernel: [ 11.816364] ide1: no devices on the port Nov 7 15:44:08 kernel: [ 11.816927] ide1 at 0x170-0x177,0x376 on irq 15 Nov 7 15:44:08 apt-install: Queueing package udev for later installation Nov 7 15:44:08 apt-install: Queueing package pciutils for later installation Nov 7 15:44:08 apt-install: Queueing package usbutils for later installation Nov 7 15:44:08 apt-install: Queueing package acpi for later installation Nov 7 15:44:08 apt-install: Queueing package acpid for later installation Nov 7 15:44:08 apt-install: Queueing package acpi-support-base for later installation Nov 7 15:44:08 apt-install: Queueing package libc6-i686 for later installation Nov 7 15:44:09 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing Nov 7 15:44:09 kernel: [ 13.076499] loop: module loaded Nov 7 15:44:09 iso-scan: First pass: Look for ISOs near top-level of each filesystem. Nov 7 15:44:10 kernel: [ 13.382298] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:44:10 kernel: [ 13.383163] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:44:10 kernel: [ 13.383769] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:10 iso-scan: Waiting for /dev/sda1 to possibly get ready.. Nov 7 15:44:13 kernel: [ 16.411350] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:44:13 kernel: [ 16.411634] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:44:13 kernel: [ 16.412266] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:13 kernel: [ 16.444603] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:44:13 kernel: [ 16.445284] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:44:13 kernel: [ 16.456472] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:13 iso-scan: Waiting for /dev/sda2 to possibly get ready.. Nov 7 15:44:16 kernel: [ 19.560113] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:44:16 kernel: [ 19.560794] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:44:16 kernel: [ 19.571983] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:16 kernel: [ 19.610959] attempt to access beyond end of device Nov 7 15:44:16 kernel: [ 19.610967] sda3: rw=0, want=4, limit=2 Nov 7 15:44:16 kernel: [ 19.610973] EXT2-fs: unable to read superblock Nov 7 15:44:16 kernel: [ 19.611020] attempt to access beyond end of device Nov 7 15:44:16 kernel: [ 19.611026] sda3: rw=0, want=4, limit=2 Nov 7 15:44:16 kernel: [ 19.611030] EXT3-fs: unable to read superblock Nov 7 15:44:16 kernel: [ 19.611067] attempt to access beyond end of device Nov 7 15:44:16 kernel: [ 19.611073] sda3: rw=0, want=18, limit=2 Nov 7 15:44:16 kernel: [ 19.611083] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024) Nov 7 15:44:16 kernel: [ 19.611093] attempt to access beyond end of device Nov 7 15:44:16 kernel: [ 19.611098] sda3: rw=0, want=130, limit=2 Nov 7 15:44:16 kernel: [ 19.611106] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024) Nov 7 15:44:16 kernel: [ 19.611144] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:16 iso-scan: Waiting for /dev/sda3 to possibly get ready.. Nov 7 15:44:16 kernel: [ 19.644827] attempt to access beyond end of device Nov 7 15:44:16 kernel: [ 19.644835] sda3: rw=0, want=66, limit=2 Nov 7 15:44:16 kernel: [ 19.644841] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 Nov 7 15:44:19 kernel: [ 22.649445] attempt to access beyond end of device Nov 7 15:44:19 kernel: [ 22.649454] sda3: rw=0, want=4, limit=2 Nov 7 15:44:19 kernel: [ 22.649460] EXT2-fs: unable to read superblock Nov 7 15:44:19 kernel: [ 22.649506] attempt to access beyond end of device Nov 7 15:44:19 kernel: [ 22.649512] sda3: rw=0, want=4, limit=2 Nov 7 15:44:19 kernel: [ 22.649516] EXT3-fs: unable to read superblock Nov 7 15:44:19 kernel: [ 22.649553] attempt to access beyond end of device Nov 7 15:44:19 kernel: [ 22.649559] sda3: rw=0, want=18, limit=2 Nov 7 15:44:19 kernel: [ 22.649569] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024) Nov 7 15:44:19 kernel: [ 22.649578] attempt to access beyond end of device Nov 7 15:44:19 kernel: [ 22.649584] sda3: rw=0, want=130, limit=2 Nov 7 15:44:19 kernel: [ 22.649591] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024) Nov 7 15:44:19 kernel: [ 22.649629] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:19 kernel: [ 22.727342] attempt to access beyond end of device Nov 7 15:44:19 kernel: [ 22.727349] sda3: rw=0, want=66, limit=2 Nov 7 15:44:19 kernel: [ 22.727355] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 Nov 7 15:44:19 kernel: [ 22.771821] EXT2-fs warning (device sda4): ext2_fill_super: mounting ext3 filesystem as ext2 Nov 7 15:44:19 iso-scan: Mounted /dev/sda4 for first pass Nov 7 15:44:19 iso-scan: Failed mounting /dev/sda4 Nov 7 15:44:19 kernel: [ 22.821763] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:19 iso-scan: Waiting for /dev/sda5 to possibly get ready.. Nov 7 15:44:22 kernel: [ 25.851311] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:22 kernel: [ 25.887051] EXT2-fs: sda6: couldn't mount because of unsupported optional features (244). Nov 7 15:44:22 kernel: [ 25.888521] EXT3-fs: sda6: couldn't mount because of unsupported optional features (240). Nov 7 15:44:22 kernel: [ 25.900554] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:22 iso-scan: Waiting for /dev/sda6 to possibly get ready.. Nov 7 15:44:25 kernel: [ 29.035631] EXT2-fs: sda6: couldn't mount because of unsupported optional features (244). Nov 7 15:44:25 kernel: [ 29.037187] EXT3-fs: sda6: couldn't mount because of unsupported optional features (240). Nov 7 15:44:25 kernel: [ 29.037766] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:25 kernel: [ 29.144454] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:25 iso-scan: Waiting for /dev/sda7 to possibly get ready.. Nov 7 15:44:28 kernel: [ 32.315108] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:29 kernel: [ 32.417694] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:29 iso-scan: Waiting for /dev/sda to possibly get ready.. Nov 7 15:44:32 kernel: [ 35.520849] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:32 kernel: [ 35.549455] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:44:32 iso-scan: Mounted /dev/sdb for first pass Nov 7 15:44:32 iso-scan: Found ISO ./mini.iso on /dev/sdb Nov 7 15:44:32 kernel: [ 35.587459] ISO 9660 Extensions: Microsoft Joliet Level 3 Nov 7 15:44:32 kernel: [ 35.588958] ISO 9660 Extensions: RRIP_1991A Nov 7 15:44:32 iso-scan: Not a Debian ISO Nov 7 15:44:32 main-menu[329]: (process:1212): umount: can't umount /hd-media: Device or resource busy Nov 7 15:44:32 main-menu[329]: WARNING **: Configuring 'iso-scan' failed with error code 1 Nov 7 15:44:32 main-menu[329]: WARNING **: Menu item 'iso-scan' failed. Nov 7 15:44:36 main-menu[329]: INFO: Modifying debconf priority limit from 'high' to 'medium' Nov 7 15:44:36 debconf: Setting debconf/priority to medium Nov 7 15:44:36 main-menu[329]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Nov 7 15:44:42 init: starting pid 310, tty '/dev/tty2': '-/bin/sh' Nov 7 15:45:42 main-menu[329]: INFO: Menu item 'iso-scan' selected Nov 7 15:45:43 net/hw-detect.hotplug: Detected hotpluggable network interface lo Nov 7 15:45:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing Nov 7 15:45:46 iso-scan: First pass: Look for ISOs near top-level of each filesystem. Nov 7 15:45:46 kernel: [ 109.636153] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:45:46 kernel: [ 109.636977] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:45:46 kernel: [ 109.637583] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:45:46 iso-scan: Waiting for /dev/sda1 to possibly get ready.. Nov 7 15:45:49 kernel: [ 112.664577] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:45:49 kernel: [ 112.664797] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:45:49 kernel: [ 112.665179] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:45:49 kernel: [ 112.743248] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:45:49 kernel: [ 112.743927] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:45:49 kernel: [ 112.755110] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:45:49 iso-scan: Waiting for /dev/sda2 to possibly get ready.. Nov 7 15:45:52 kernel: [ 115.858757] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:45:52 kernel: [ 115.859436] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:45:52 kernel: [ 115.870627] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:45:52 kernel: [ 115.910407] attempt to access beyond end of device Nov 7 15:45:52 kernel: [ 115.910415] sda3: rw=0, want=4, limit=2 Nov 7 15:45:52 kernel: [ 115.910421] EXT2-fs: unable to read superblock Nov 7 15:45:52 kernel: [ 115.910467] attempt to access beyond end of device Nov 7 15:45:52 kernel: [ 115.910474] sda3: rw=0, want=4, limit=2 Nov 7 15:45:52 kernel: [ 115.910478] EXT3-fs: unable to read superblock Nov 7 15:45:52 kernel: [ 115.910515] attempt to access beyond end of device Nov 7 15:45:52 kernel: [ 115.910521] sda3: rw=0, want=18, limit=2 Nov 7 15:45:52 kernel: [ 115.910531] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024) Nov 7 15:45:52 kernel: [ 115.910540] attempt to access beyond end of device Nov 7 15:45:52 kernel: [ 115.910546] sda3: rw=0, want=130, limit=2 Nov 7 15:45:52 kernel: [ 115.910554] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024) Nov 7 15:45:52 kernel: [ 115.910595] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:45:52 kernel: [ 115.943471] attempt to access beyond end of device Nov 7 15:45:52 kernel: [ 115.943479] sda3: rw=0, want=66, limit=2 Nov 7 15:45:52 kernel: [ 115.943485] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 Nov 7 15:45:52 iso-scan: Waiting for /dev/sda3 to possibly get ready.. Nov 7 15:45:55 kernel: [ 118.948248] attempt to access beyond end of device Nov 7 15:45:55 kernel: [ 118.948256] sda3: rw=0, want=4, limit=2 Nov 7 15:45:55 kernel: [ 118.948262] EXT2-fs: unable to read superblock Nov 7 15:45:55 kernel: [ 118.948309] attempt to access beyond end of device Nov 7 15:45:55 kernel: [ 118.948315] sda3: rw=0, want=4, limit=2 Nov 7 15:45:55 kernel: [ 118.948319] EXT3-fs: unable to read superblock Nov 7 15:45:55 kernel: [ 118.948356] attempt to access beyond end of device Nov 7 15:45:55 kernel: [ 118.948362] sda3: rw=0, want=18, limit=2 Nov 7 15:45:55 kernel: [ 118.948372] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024) Nov 7 15:45:55 kernel: [ 118.948381] attempt to access beyond end of device Nov 7 15:45:55 kernel: [ 118.948387] sda3: rw=0, want=130, limit=2 Nov 7 15:45:55 kernel: [ 118.948394] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024) Nov 7 15:45:55 kernel: [ 118.948434] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:45:55 kernel: [ 119.026003] attempt to access beyond end of device Nov 7 15:45:55 kernel: [ 119.026011] sda3: rw=0, want=66, limit=2 Nov 7 15:45:55 kernel: [ 119.026017] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 Nov 7 15:45:55 kernel: [ 119.070468] EXT2-fs warning (device sda4): ext2_fill_super: mounting ext3 filesystem as ext2 Nov 7 15:45:55 iso-scan: Mounted /dev/sda4 for first pass Nov 7 15:45:55 iso-scan: Failed mounting /dev/sda4 Nov 7 15:45:55 kernel: [ 119.117711] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:45:55 iso-scan: Waiting for /dev/sda5 to possibly get ready.. Nov 7 15:45:58 kernel: [ 122.146897] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:45:58 kernel: [ 122.185700] EXT2-fs: sda6: couldn't mount because of unsupported optional features (244). Nov 7 15:45:58 kernel: [ 122.187205] EXT3-fs: sda6: couldn't mount because of unsupported optional features (240). Nov 7 15:45:58 kernel: [ 122.199208] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:45:58 iso-scan: Waiting for /dev/sda6 to possibly get ready.. Nov 7 15:46:02 kernel: [ 125.334280] EXT2-fs: sda6: couldn't mount because of unsupported optional features (244). Nov 7 15:46:02 kernel: [ 125.335826] EXT3-fs: sda6: couldn't mount because of unsupported optional features (240). Nov 7 15:46:02 kernel: [ 125.336471] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:46:02 kernel: [ 125.443100] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:46:02 iso-scan: Waiting for /dev/sda7 to possibly get ready.. Nov 7 15:46:05 kernel: [ 128.602743] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:46:05 kernel: [ 128.705329] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:46:05 iso-scan: Waiting for /dev/sda to possibly get ready.. Nov 7 15:46:08 kernel: [ 131.808486] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:46:08 iso-scan: Waiting for /dev/sdb to possibly get ready.. Nov 7 15:46:23 iso-scan: Failing with ISO_COUNT = 0, MOUNTABLE_DEVS_COUNT = 1, ISO_MOUNT_COUNT = 0 Nov 7 15:46:23 main-menu[329]: WARNING **: Configuring 'iso-scan' failed with error code 1 Nov 7 15:46:23 main-menu[329]: WARNING **: Menu item 'iso-scan' failed. Nov 7 15:46:24 main-menu[329]: INFO: Modifying debconf priority limit from 'medium' to 'low' Nov 7 15:46:24 debconf: Setting debconf/priority to low Nov 7 15:46:24 main-menu[329]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Nov 7 15:54:21 main-menu[329]: INFO: Menu item 'iso-scan' selected Nov 7 15:54:21 net/hw-detect.hotplug: Detected hotpluggable network interface lo Nov 7 15:54:24 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing Nov 7 15:54:24 iso-scan: First pass: Look for ISOs near top-level of each filesystem. Nov 7 15:54:24 kernel: [ 628.226587] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:54:24 kernel: [ 628.227451] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:54:24 kernel: [ 628.228216] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:24 iso-scan: Waiting for /dev/sda1 to possibly get ready.. Nov 7 15:54:27 kernel: [ 631.255952] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:54:27 kernel: [ 631.256379] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:54:27 kernel: [ 631.256981] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:27 kernel: [ 631.282394] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:54:27 kernel: [ 631.282678] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:54:27 kernel: [ 631.283253] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:27 iso-scan: Waiting for /dev/sda2 to possibly get ready.. Nov 7 15:54:30 kernel: [ 634.311576] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:54:30 kernel: [ 634.311833] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:54:30 kernel: [ 634.312495] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:31 kernel: [ 634.337928] attempt to access beyond end of device Nov 7 15:54:31 kernel: [ 634.337936] sda3: rw=0, want=4, limit=2 Nov 7 15:54:31 kernel: [ 634.337942] EXT2-fs: unable to read superblock Nov 7 15:54:31 kernel: [ 634.337989] attempt to access beyond end of device Nov 7 15:54:31 kernel: [ 634.337995] sda3: rw=0, want=4, limit=2 Nov 7 15:54:31 kernel: [ 634.337999] EXT3-fs: unable to read superblock Nov 7 15:54:31 kernel: [ 634.338036] attempt to access beyond end of device Nov 7 15:54:31 kernel: [ 634.338042] sda3: rw=0, want=18, limit=2 Nov 7 15:54:31 kernel: [ 634.338052] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024) Nov 7 15:54:31 kernel: [ 634.338062] attempt to access beyond end of device Nov 7 15:54:31 kernel: [ 634.338067] sda3: rw=0, want=130, limit=2 Nov 7 15:54:31 kernel: [ 634.338075] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024) Nov 7 15:54:31 kernel: [ 634.338115] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:31 kernel: [ 634.367280] attempt to access beyond end of device Nov 7 15:54:31 kernel: [ 634.367288] sda3: rw=0, want=66, limit=2 Nov 7 15:54:31 kernel: [ 634.367294] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 Nov 7 15:54:31 iso-scan: Waiting for /dev/sda3 to possibly get ready.. Nov 7 15:54:34 kernel: [ 637.372097] attempt to access beyond end of device Nov 7 15:54:34 kernel: [ 637.372105] sda3: rw=0, want=4, limit=2 Nov 7 15:54:34 kernel: [ 637.372111] EXT2-fs: unable to read superblock Nov 7 15:54:34 kernel: [ 637.372158] attempt to access beyond end of device Nov 7 15:54:34 kernel: [ 637.372164] sda3: rw=0, want=4, limit=2 Nov 7 15:54:34 kernel: [ 637.372168] EXT3-fs: unable to read superblock Nov 7 15:54:34 kernel: [ 637.372205] attempt to access beyond end of device Nov 7 15:54:34 kernel: [ 637.372212] sda3: rw=0, want=18, limit=2 Nov 7 15:54:34 kernel: [ 637.372221] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024) Nov 7 15:54:34 kernel: [ 637.372230] attempt to access beyond end of device Nov 7 15:54:34 kernel: [ 637.372236] sda3: rw=0, want=130, limit=2 Nov 7 15:54:34 kernel: [ 637.372244] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024) Nov 7 15:54:34 kernel: [ 637.372283] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:34 kernel: [ 637.449798] attempt to access beyond end of device Nov 7 15:54:34 kernel: [ 637.449805] sda3: rw=0, want=66, limit=2 Nov 7 15:54:34 kernel: [ 637.449812] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 Nov 7 15:54:34 iso-scan: Mounted /dev/sda4 for first pass Nov 7 15:54:34 kernel: [ 637.494272] EXT2-fs warning (device sda4): ext2_fill_super: mounting ext3 filesystem as ext2 Nov 7 15:54:34 iso-scan: Failed mounting /dev/sda4 Nov 7 15:54:34 kernel: [ 637.542089] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:34 iso-scan: Waiting for /dev/sda5 to possibly get ready.. Nov 7 15:54:37 kernel: [ 640.571584] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:37 kernel: [ 640.609499] EXT2-fs: sda6: couldn't mount because of unsupported optional features (244). Nov 7 15:54:37 kernel: [ 640.611036] EXT3-fs: sda6: couldn't mount because of unsupported optional features (240). Nov 7 15:54:37 kernel: [ 640.623010] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:37 iso-scan: Waiting for /dev/sda6 to possibly get ready.. Nov 7 15:54:40 kernel: [ 643.758075] EXT2-fs: sda6: couldn't mount because of unsupported optional features (244). Nov 7 15:54:40 kernel: [ 643.759658] EXT3-fs: sda6: couldn't mount because of unsupported optional features (240). Nov 7 15:54:40 kernel: [ 643.760238] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:40 kernel: [ 643.866897] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:40 iso-scan: Waiting for /dev/sda7 to possibly get ready.. Nov 7 15:54:43 kernel: [ 647.037546] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:43 kernel: [ 647.140132] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:43 iso-scan: Waiting for /dev/sda to possibly get ready.. Nov 7 15:54:46 kernel: [ 650.243285] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:54:46 iso-scan: Waiting for /dev/sdb to possibly get ready.. Nov 7 15:54:57 iso-scan: Failing with ISO_COUNT = 0, MOUNTABLE_DEVS_COUNT = 1, ISO_MOUNT_COUNT = 0 Nov 7 15:54:57 main-menu[329]: WARNING **: Configuring 'iso-scan' failed with error code 1 Nov 7 15:54:57 main-menu[329]: WARNING **: Menu item 'iso-scan' failed. Nov 7 15:54:58 main-menu[329]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Nov 7 15:54:59 main-menu[329]: INFO: Menu item 'load-iso' selected Nov 7 15:54:59 net/hw-detect.hotplug: Detected hotpluggable network interface lo Nov 7 15:55:02 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing Nov 7 15:55:02 iso-scan: First pass: Look for ISOs near top-level of each filesystem. Nov 7 15:55:02 kernel: [ 666.184036] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:55:02 kernel: [ 666.184262] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:55:02 kernel: [ 666.184678] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:02 iso-scan: Waiting for /dev/sda1 to possibly get ready.. Nov 7 15:55:05 kernel: [ 669.311306] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:55:05 kernel: [ 669.312313] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:55:05 kernel: [ 669.312917] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:06 kernel: [ 669.346869] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:55:06 kernel: [ 669.347550] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:55:06 kernel: [ 669.358740] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:06 iso-scan: Waiting for /dev/sda2 to possibly get ready.. Nov 7 15:55:09 kernel: [ 672.406587] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:55:09 kernel: [ 672.407190] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:55:09 kernel: [ 672.418459] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:09 kernel: [ 672.458194] attempt to access beyond end of device Nov 7 15:55:09 kernel: [ 672.458202] sda3: rw=0, want=4, limit=2 Nov 7 15:55:09 kernel: [ 672.458208] EXT2-fs: unable to read superblock Nov 7 15:55:09 kernel: [ 672.458254] attempt to access beyond end of device Nov 7 15:55:09 kernel: [ 672.458261] sda3: rw=0, want=4, limit=2 Nov 7 15:55:09 kernel: [ 672.458265] EXT3-fs: unable to read superblock Nov 7 15:55:09 kernel: [ 672.458301] attempt to access beyond end of device Nov 7 15:55:09 kernel: [ 672.458308] sda3: rw=0, want=18, limit=2 Nov 7 15:55:09 kernel: [ 672.458317] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024) Nov 7 15:55:09 kernel: [ 672.458327] attempt to access beyond end of device Nov 7 15:55:09 kernel: [ 672.458333] sda3: rw=0, want=130, limit=2 Nov 7 15:55:09 kernel: [ 672.458341] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024) Nov 7 15:55:09 kernel: [ 672.458379] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:09 kernel: [ 672.491301] attempt to access beyond end of device Nov 7 15:55:09 kernel: [ 672.491309] sda3: rw=0, want=66, limit=2 Nov 7 15:55:09 kernel: [ 672.491315] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 Nov 7 15:55:09 iso-scan: Waiting for /dev/sda3 to possibly get ready.. Nov 7 15:55:12 kernel: [ 675.496065] attempt to access beyond end of device Nov 7 15:55:12 kernel: [ 675.496073] sda3: rw=0, want=4, limit=2 Nov 7 15:55:12 kernel: [ 675.496079] EXT2-fs: unable to read superblock Nov 7 15:55:12 kernel: [ 675.496127] attempt to access beyond end of device Nov 7 15:55:12 kernel: [ 675.496133] sda3: rw=0, want=4, limit=2 Nov 7 15:55:12 kernel: [ 675.496138] EXT3-fs: unable to read superblock Nov 7 15:55:12 kernel: [ 675.496175] attempt to access beyond end of device Nov 7 15:55:12 kernel: [ 675.496181] sda3: rw=0, want=18, limit=2 Nov 7 15:55:12 kernel: [ 675.496190] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024) Nov 7 15:55:12 kernel: [ 675.496199] attempt to access beyond end of device Nov 7 15:55:12 kernel: [ 675.496205] sda3: rw=0, want=130, limit=2 Nov 7 15:55:12 kernel: [ 675.496213] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024) Nov 7 15:55:12 kernel: [ 675.496252] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:12 kernel: [ 675.573819] attempt to access beyond end of device Nov 7 15:55:12 kernel: [ 675.573826] sda3: rw=0, want=66, limit=2 Nov 7 15:55:12 kernel: [ 675.573832] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 Nov 7 15:55:12 iso-scan: Mounted /dev/sda4 for first pass Nov 7 15:55:12 kernel: [ 675.618291] EXT2-fs warning (device sda4): ext2_fill_super: mounting ext3 filesystem as ext2 Nov 7 15:55:12 iso-scan: Failed mounting /dev/sda4 Nov 7 15:55:12 kernel: [ 675.666460] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:12 iso-scan: Waiting for /dev/sda5 to possibly get ready.. Nov 7 15:55:15 kernel: [ 678.695518] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:15 kernel: [ 678.733520] EXT2-fs: sda6: couldn't mount because of unsupported optional features (244). Nov 7 15:55:15 kernel: [ 678.734991] EXT3-fs: sda6: couldn't mount because of unsupported optional features (240). Nov 7 15:55:15 kernel: [ 678.747031] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:15 iso-scan: Waiting for /dev/sda6 to possibly get ready.. Nov 7 15:55:18 kernel: [ 681.882100] EXT2-fs: sda6: couldn't mount because of unsupported optional features (244). Nov 7 15:55:18 kernel: [ 681.883690] EXT3-fs: sda6: couldn't mount because of unsupported optional features (240). Nov 7 15:55:18 kernel: [ 681.884289] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:18 kernel: [ 681.990919] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:18 iso-scan: Waiting for /dev/sda7 to possibly get ready.. Nov 7 15:55:21 kernel: [ 685.139284] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:21 kernel: [ 685.253148] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:21 iso-scan: Waiting for /dev/sda to possibly get ready.. Nov 7 15:55:25 kernel: [ 688.377975] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:55:25 iso-scan: Waiting for /dev/sdb to possibly get ready.. Nov 7 15:56:36 iso-scan: Second pass: Search whole filesystems for ISOs. Nov 7 15:56:36 kernel: [ 760.258725] EXT2-fs warning (device sda4): ext2_fill_super: mounting ext3 filesystem as ext2 Nov 7 15:56:36 iso-scan: Mounted /dev/sda4 for second pass Nov 7 15:56:45 iso-scan: Failing with ISO_COUNT = 0, MOUNTABLE_DEVS_COUNT = 1, ISO_MOUNT_COUNT = 0 Nov 7 15:56:45 main-menu[329]: WARNING **: Configuring 'iso-scan' failed with error code 1 Nov 7 15:56:45 main-menu[329]: WARNING **: Menu item 'load-iso' failed. Nov 7 15:56:46 main-menu[329]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Nov 7 15:57:51 kernel: [ 835.250202] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:57:51 kernel: [ 835.250301] ISO 9660 Extensions: Microsoft Joliet Level 3 Nov 7 15:57:51 kernel: [ 835.250350] ISO 9660 Extensions: RRIP_1991A Nov 7 15:58:03 main-menu[329]: INFO: Menu item 'iso-scan' selected Nov 7 15:58:03 net/hw-detect.hotplug: Detected hotpluggable network interface lo Nov 7 15:58:06 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing Nov 7 15:58:06 iso-scan: First pass: Look for ISOs near top-level of each filesystem. Nov 7 15:58:07 kernel: [ 850.476036] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:58:07 kernel: [ 850.476262] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:58:07 kernel: [ 850.476672] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:07 iso-scan: Waiting for /dev/sda1 to possibly get ready.. Nov 7 15:58:10 kernel: [ 853.590956] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:58:10 kernel: [ 853.591637] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Nov 7 15:58:10 kernel: [ 853.602909] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:10 kernel: [ 853.657667] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:58:10 kernel: [ 853.658298] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:58:10 kernel: [ 853.669535] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:10 iso-scan: Waiting for /dev/sda2 to possibly get ready.. Nov 7 15:58:13 kernel: [ 856.771291] EXT2-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:58:13 kernel: [ 856.772293] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240). Nov 7 15:58:13 kernel: [ 856.772908] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:13 kernel: [ 856.823056] attempt to access beyond end of device Nov 7 15:58:13 kernel: [ 856.823064] sda3: rw=0, want=4, limit=2 Nov 7 15:58:13 kernel: [ 856.823070] EXT2-fs: unable to read superblock Nov 7 15:58:13 kernel: [ 856.823117] attempt to access beyond end of device Nov 7 15:58:13 kernel: [ 856.823123] sda3: rw=0, want=4, limit=2 Nov 7 15:58:13 kernel: [ 856.823127] EXT3-fs: unable to read superblock Nov 7 15:58:13 kernel: [ 856.823164] attempt to access beyond end of device Nov 7 15:58:13 kernel: [ 856.823170] sda3: rw=0, want=18, limit=2 Nov 7 15:58:13 kernel: [ 856.823180] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024) Nov 7 15:58:13 kernel: [ 856.823190] attempt to access beyond end of device Nov 7 15:58:13 kernel: [ 856.823196] sda3: rw=0, want=130, limit=2 Nov 7 15:58:13 kernel: [ 856.823204] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024) Nov 7 15:58:13 kernel: [ 856.823245] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:13 iso-scan: Waiting for /dev/sda3 to possibly get ready.. Nov 7 15:58:13 kernel: [ 856.857887] attempt to access beyond end of device Nov 7 15:58:13 kernel: [ 856.857895] sda3: rw=0, want=66, limit=2 Nov 7 15:58:13 kernel: [ 856.857901] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 Nov 7 15:58:16 kernel: [ 859.862650] attempt to access beyond end of device Nov 7 15:58:16 kernel: [ 859.862658] sda3: rw=0, want=4, limit=2 Nov 7 15:58:16 kernel: [ 859.862664] EXT2-fs: unable to read superblock Nov 7 15:58:16 kernel: [ 859.862710] attempt to access beyond end of device Nov 7 15:58:16 kernel: [ 859.862717] sda3: rw=0, want=4, limit=2 Nov 7 15:58:16 kernel: [ 859.862721] EXT3-fs: unable to read superblock Nov 7 15:58:16 kernel: [ 859.862758] attempt to access beyond end of device Nov 7 15:58:16 kernel: [ 859.862765] sda3: rw=0, want=18, limit=2 Nov 7 15:58:16 kernel: [ 859.862774] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024) Nov 7 15:58:16 kernel: [ 859.862783] attempt to access beyond end of device Nov 7 15:58:16 kernel: [ 859.862789] sda3: rw=0, want=130, limit=2 Nov 7 15:58:16 kernel: [ 859.862797] REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024) Nov 7 15:58:16 kernel: [ 859.862836] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:16 kernel: [ 859.940408] attempt to access beyond end of device Nov 7 15:58:16 kernel: [ 859.940415] sda3: rw=0, want=66, limit=2 Nov 7 15:58:16 kernel: [ 859.940422] isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32 Nov 7 15:58:16 iso-scan: Mounted /dev/sda4 for first pass Nov 7 15:58:16 kernel: [ 859.984877] EXT2-fs warning (device sda4): ext2_fill_super: mounting ext3 filesystem as ext2 Nov 7 15:58:16 iso-scan: Failed mounting /dev/sda4 Nov 7 15:58:16 kernel: [ 860.034826] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:16 iso-scan: Waiting for /dev/sda5 to possibly get ready.. Nov 7 15:58:19 kernel: [ 863.064409] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:19 kernel: [ 863.100106] EXT2-fs: sda6: couldn't mount because of unsupported optional features (244). Nov 7 15:58:19 kernel: [ 863.101566] EXT3-fs: sda6: couldn't mount because of unsupported optional features (240). Nov 7 15:58:19 kernel: [ 863.113612] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:19 iso-scan: Waiting for /dev/sda6 to possibly get ready.. Nov 7 15:58:22 kernel: [ 866.248688] EXT2-fs: sda6: couldn't mount because of unsupported optional features (244). Nov 7 15:58:22 kernel: [ 866.250235] EXT3-fs: sda6: couldn't mount because of unsupported optional features (240). Nov 7 15:58:22 kernel: [ 866.250822] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:23 kernel: [ 866.357507] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:23 iso-scan: Waiting for /dev/sda7 to possibly get ready.. Nov 7 15:58:26 kernel: [ 869.517147] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:26 kernel: [ 869.619733] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:26 iso-scan: Waiting for /dev/sda to possibly get ready.. Nov 7 15:58:29 kernel: [ 872.722885] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 7 15:58:29 iso-scan: Waiting for /dev/sdb to possibly get ready.. Nov 7 16:19:18 iso-scan: Failing with ISO_COUNT = 0, MOUNTABLE_DEVS_COUNT = 1, ISO_MOUNT_COUNT = 0 Nov 7 16:19:18 main-menu[329]: WARNING **: Configuring 'iso-scan' failed with error code 1 Nov 7 16:19:18 main-menu[329]: WARNING **: Menu item 'iso-scan' failed. Nov 7 16:19:18 main-menu[329]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Nov 7 16:19:21 main-menu[329]: INFO: Menu item 'save-logs' selected -- -----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ gro.gilbert @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
--- End Message ---
--- Begin Message ---
- To: "Dr. David Alan Gilbert" <debian@treblig.org>, 602737-done@bugs.debian.org
- Subject: Re: Bug#602737: Failure to find iso image from thumb drive
- From: Christian PERRIER <bubulle@debian.org>
- Date: Sun, 7 Nov 2010 20:18:57 +0100
- Message-id: <20101107191857.GM13649@mykerinos.kheops.frmug.org>
- In-reply-to: <[🔎] 20101107174220.GB14277@gallifrey>
- References: <[🔎] 20101107163941.GA14277@gallifrey> <[🔎] 4CD6E125.1000003@pbandjelly.org> <[🔎] 20101107174220.GB14277@gallifrey>
Quoting Dr. David Alan Gilbert (debian@treblig.org): > Thanks for your reply - I have the installation going at the moment > using a unetbootin created install. hence closing the bug report.Attachment: signature.asc
Description: Digital signature
--- End Message ---