Your message dated Fri, 14 Mar 2008 19:53:40 +0100 with message-id <20080314185340.GC4095@chaos.nusquama.org> and subject line fixed in 1.23 has caused the Debian Bug report #445854, regarding Installation using i386 NetInstall over a serial line to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 445854: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=445854 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Installation using i386 NetInstall over a serial line
- From: Steve Dobson <steve@dobson.org>
- Date: Mon, 8 Oct 2007 17:20:37 +0100
- Message-id: <20071008162037.GH27895@bugs.localdomain>
Package: installation-reports Boot method: Network install using serial console boot: install console=ttyS0,17200 Image version: ftp://ftp.uk.debian.org/debian/dists/etch/main/installer-i386/20070308etch1/images/netboot/mini.iso or: ftp://ftp.uk.debian.org/debian/dists/etch/main/installer-i386/20070308/images/netboot/mini.iso Date: 2007/10/08 10:00 +0100 Machine: Dell PowerEdge SC 1425 Processor: Intel(R) Xeon(TM) CPU 2.80GHz Memory: 516644k Partitions: Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 243 1951866 83 Linux /dev/sda2 244 9726 76172197+ 5 Extended /dev/sda5 244 1459 9767488+ 83 Linux /dev/sda6 1460 2675 9767488+ 83 Linux /dev/sda7 2676 3891 9767488+ 83 Linux /dev/sda8 3892 4499 4883728+ 82 Linux swap / Solaris /dev/sda9 4500 4864 2931831 83 Linux /dev/sda10 4865 6080 9767488+ 83 Linux /dev/sda11 6081 7296 9767488+ 83 Linux /dev/sda12 7297 8512 9767488+ 83 Linux /dev/sda13 8513 9726 9751423+ 83 Linux Output of lspci -nn and lspci -vnn: # lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 09) 00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 09) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) 01:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) 01:00.1 PIC [0800]: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A [8086:0326] (rev 09) 01:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) 01:00.3 PIC [0800]: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B [8086:0327] (rev 09) 02:04.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05) 04:03.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05) 04:0d.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] # lspci -vnn 00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 09) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, fast devsel, latency 0 Capabilities: [40] Vendor Specific Information 00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dfb00000-dfefffff Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable- Capabilities: [64] Express Root Port (Slot-) IRQ 0 Capabilities: [100] Advanced Error Reporting 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at cce0 [size=32] 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, medium devsel, latency 0, IRQ 185 I/O ports at ccc0 [size=32] 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, medium devsel, latency 0, IRQ 201 Memory at dff00000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: df900000-dfafffff Prefetchable memory behind bridge: d0000000-d7ffffff 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at fc00 [size=16] Memory at 20000000 (32-bit, non-prefetchable) [size=1K] 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 209 I/O ports at ccb8 [size=8] I/O ports at ccb0 [size=4] I/O ports at cca0 [size=8] I/O ports at cc98 [size=4] I/O ports at cc80 [size=16] 01:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=01, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dfd00000-dfefffff Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [6c] Power Management version 2 Capabilities: [d8] PCI-X bridge device Capabilities: [100] Advanced Error Reporting Capabilities: [300] Power Budgeting 01:00.1 PIC [0800]: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A [8086:0326] (rev 09) (prog-if 20 [IO(X)-APIC]) Flags: bus master, fast devsel, latency 0 Memory at dfbff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Express Endpoint IRQ 0 Capabilities: [6c] Power Management version 2 01:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=01, secondary=03, subordinate=03, sec-latency=64 Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [6c] Power Management version 2 Capabilities: [d8] PCI-X bridge device Capabilities: [100] Advanced Error Reporting Capabilities: [300] Power Budgeting 01:00.3 PIC [0800]: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B [8086:0327] (rev 09) (prog-if 20 [IO(X)-APIC]) Flags: bus master, fast devsel, latency 0 Memory at dfbfe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Express Endpoint IRQ 0 Capabilities: [6c] Power Management version 2 02:04.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 177 Memory at dfde0000 (32-bit, non-prefetchable) [size=128K] I/O ports at ecc0 [size=64] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device 04:03.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 193 Memory at df9e0000 (32-bit, non-prefetchable) [size=128K] I/O ports at dcc0 [size=64] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device 04:0d.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, VGA palette snoop, stepping, medium devsel, latency 32, IRQ 11 Memory at d0000000 (32-bit, prefetchable) [size=128M] I/O ports at d800 [size=256] Memory at df9d0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at df900000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: The system booted just fine, but GRUB had bein configued with the following at the top of /boot/grub/menu.lst: serial --unit=0 --speed=19200 --word=console=ttyS0,19200 --parity= --stop=1 terminal serial As the word and parity are not configured correctly GRUB still worked but sent it's output to the attached monitor not to the serial port. I changed the top line to: serial --unit=0 --speed=19200 --word=8 --parity=no --stop=1 and GRUB then worked as expected. SteveAttachment: signature.asc
Description: Digital signature
--- End Message ---
--- Begin Message ---
- To: 445854-done@bugs.debian.org
- Subject: fixed in 1.23
- From: Max Vozeler <xam@debian.org>
- Date: Fri, 14 Mar 2008 19:53:40 +0100
- Message-id: <20080314185340.GC4095@chaos.nusquama.org>
Version: 1.23 The code has been improved post-etch and should handle "plain" options without partity/word correctly. Max
--- End Message ---