Bug#464445: Installation report - SunBlade 1000 (sparc)
Package: installation-reports
Boot method: Daily built netinst CD
Image version: This is a Debian installation CDROM, built on 20080206-09:44. (netinst)
Date: Wed Feb 6 22:08:05 GMT 2008
Machine: SunBlade 1000
Processor: 2x750MHz Ultrasparc III CPUs
Memory: 2GB
Partitions - set up using guided partitioning:
# df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda2 ext3 6728312 709296 5677236 12% /
tmpfs tmpfs 1036760 0 1036760 0% /lib/init/rw
udev tmpfs 10240 136 10104 2% /dev
tmpfs tmpfs 1036760 0 1036760 0% /dev/shm
/dev/sda1 ext3 93335 19873 68643 23% /boot
/dev/sda5 ext3 61393444 184288 58090540 1% /home
Output of lspci -nn:
# lspci -nn
0000:00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Schizo PCI Bus Module [108e:8001]
0000:00:01.0 VGA compatible controller [0300]: Intergraph Corporation Sun Expert3D-Lite Graphics Accelerator [1091:07a0]
0000:00:05.0 Bridge [0680]: Sun Microsystems Computer Corp. RIO EBUS [108e:1100] (rev 01)
0000:00:05.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO 10/100 Ethernet [eri] [108e:1101] (rev 01)
0000:00:05.2 FireWire (IEEE 1394) [0c00]: Sun Microsystems Computer Corp. RIO 1394 [108e:1102] (rev 01)
0000:00:05.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB [108e:1103] (rev 01)
0000:00:06.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c875 [1000:000f] (rev 37)
0000:00:06.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c875 [1000:000f] (rev 37)
0001:00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Schizo PCI Bus Module [108e:8001]
0001:00:04.0 SCSI storage controller [0100]: QLogic Corp. QLA2200 64-bit Fibre Channel Adapter [1077:2200] (rev 05)
Output of lspci -vnn:
0000:00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Schizo PCI Bus Module [108e:8001]
Flags: bus master, medium devsel, latency 64, IRQ 2147483647
0000:00:01.0 VGA compatible controller [0300]: Intergraph Corporation Sun Expert3D-Lite Graphics Accelerator [1091:07a0] (prog-if 00 [VGA controller])
Subsystem: Intergraph Corporation Unknown device [1091:0140]
Flags: medium devsel, IRQ 18
Memory at 7fe02000000 (32-bit, prefetchable) [disabled] [size=32M]
Memory at 7fe00130000 (32-bit, non-prefetchable) [disabled] [size=64K]
Memory at 7fe04000000 (32-bit, prefetchable) [disabled] [size=8M]
Expansion ROM at 7fe00140000 [disabled] [size=256K]
Capabilities: [68] Power Management version 1
0000:00:05.0 Bridge [0680]: Sun Microsystems Computer Corp. RIO EBUS [108e:1100] (rev 01)
Flags: bus master, medium devsel, latency 64
BIST result: 00
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Expansion ROM at <ignored> [disabled]
0000:00:05.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO 10/100 Ethernet [eri] [108e:1101] (rev 01)
Flags: bus master, medium devsel, latency 64, IRQ 13
BIST result: 00
Memory at 7fe00100000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at 7fe00400000 [disabled] [size=4M]
Kernel driver in use: gem
Kernel modules: sungem
0000:00:05.2 FireWire (IEEE 1394) [0c00]: Sun Microsystems Computer Corp. RIO 1394 [108e:1102] (rev 01) (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 64, IRQ 14
BIST result: 00
Memory at 7fe00120000 (32-bit, non-prefetchable) [size=8K]
Memory at 7fe00122000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at 7fe00800000 [disabled] [size=4M]
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
0000:00:05.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB [108e:1103] (rev 01) (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 64, IRQ 15
BIST result: 00
Memory at 7fe01000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at 7fe00c00000 [disabled] [size=4M]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
0000:00:06.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c875 [1000:000f] (rev 37)
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at 7ffef000300 [size=256]
Memory at 7fe00124000 (32-bit, non-prefetchable) [size=8K]
Memory at 7fe00126000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 1
Kernel driver in use: sym53c8xx
Kernel modules: sym53c8xx
0000:00:06.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c875 [1000:000f] (rev 37)
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at 7ffef000400 [size=256]
Memory at 7fe00128000 (32-bit, non-prefetchable) [size=8K]
Memory at 7fe0012a000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 1
Kernel driver in use: sym53c8xx
Kernel modules: sym53c8xx
0001:00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Schizo PCI Bus Module [108e:8001]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 2147483647
0001:00:04.0 SCSI storage controller [0100]: QLogic Corp. QLA2200 64-bit Fibre Channel Adapter [1077:2200] (rev 05)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 21
I/O ports at 7ffed000300 [size=256]
Memory at 7fd00100000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at 7fd00120000 [disabled] [size=128K]
Capabilities: [44] Power Management version 1
Kernel driver in use: qla2xxx
Kernel modules: qla2xxx
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O-]
Comments/Problems:
Installed from serial console using netinst CD. Everything went
smoothly except for hard drive detection: the drive is hooked up to a
Qlogic controller, which requires non-free firmware to be initialized.
As far as I can tell, d-i still does not have support for it, so
before running the hard drive detection I had to drop into a shell and
manually run the following commands:
wget http://ftp.ie.debian.org/debian/pool/non-free/f/firmware-nonfree/firmware-qlogic-di_0.9_all.udeb
udpkg -i firmware-qlogic-di_0.9_all.udeb
modprobe -r qla2xxx
modprobe qla2xxx
After that I was able to proceed with the installation. Same thing
needed to be done before reboot: chroot into the installed system,
mount /proc, install firmware-qlogic package (had to add non-free to
sources.list), regenerate initrd using update-initramfs -k all -u.
Cheers.
--
Jurij Smakov jurij@wooyd.org
Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC
Reply to: