[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#393523: marked as done (ethdetect: could firewire become non default)

Your message dated Tue, 21 Aug 2007 16:48:53 +0200
with message-id <20070821144853.GA28041@qamar>
and subject line Bug#393523: could firewire become non default
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports

Boot method: CD
Image version: 15-Oct-2006 cdimage.debian.org etch_di_beta3/i386 1st ISO only
Date: 16-Oct-2006 13:27 EST US

Machine: Tyan Thunder k8 motherboard
Processor:Opterorn
Memory:1 GB
Partitions:
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/sda6     ext3     2403496    302028   1979376  14% /
udev         tmpfs       10240        84     10156   1% /dev
devshm       tmpfs      517872         0    517872   0% /dev/shm
/dev/sda11    ext3    47300028    184480  44674072   1% /backup
/dev/sda10    ext3    26850024    176288  25331108   1% /big
/dev/sda12    ext3    48094568  13578472  32073016  30% /distro
/dev/sda8     ext2     2403496        72   2281332   1% /home
/dev/sda9     ext2     2403496        52   2281352   1% /projects
/dev/sda7     ext3     2403496   1535360    746044  68% /usr


Output of lspci and lspci -n:
lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio 
Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM 
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control
01:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller 
(rev 80)
05:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 GS (rev a1)
dg@opt:~$ lspci -n
00:00.0 0580: 10de:005e (rev a3)
00:01.0 0601: 10de:0050 (rev a3)
00:01.1 0c05: 10de:0052 (rev a2)
00:02.0 0c03: 10de:005a (rev a2)
00:02.1 0c03: 10de:005b (rev a3)
00:04.0 0401: 10de:0059 (rev a2)
00:06.0 0101: 10de:0053 (rev f2)
00:07.0 0101: 10de:0054 (rev f3)
00:08.0 0101: 10de:0055 (rev f3)
00:09.0 0604: 10de:005c (rev a2)
00:0a.0 0680: 10de:0057 (rev a3)
00:0b.0 0604: 10de:005d (rev a3)
00:0c.0 0604: 10de:005d (rev a3)
00:0d.0 0604: 10de:005d (rev a3)
00:0e.0 0604: 10de:005d (rev a3)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:06.0 0c00: 1106:3044 (rev 80)
05:00.0 0300: 10de:01df (rev a1)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [E]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

Network Hardware, my motherboard comes in two models, one has both the NV 
Marvell onboard GB lan and the Broadcom GB lan, and one model (the one I 
have) has only the NV lan.  The installer "picks up" a non-existent second 
lan on my motherboard, and links it to "eth0."  I knew enough to choose 
"eth1," but I am concerned that more novice Debian users might have problems 
here.

I maintain several computers in two homes, so I keep a mirror of the debian 
mirror at MIT.edu as a filesystem and copy that from computer to computer, 
then I install from the filesystem.  I find this practice saves MIT.edu 
bandwidth (I only update one copy) and saves me time (a disk partition is 
faster that a DSL modem.)  I was very upset that there was no way to install 
from the file system, or at least there was no obvious way of doing it (I am 
discussing a filesystem that I installed via a boot-cd to a large partition 
before installing debian on the same disk.)  Looks like I could access an 
intranet lan to do this, but I do not have one set up.  Being able to do this 
would be a great wishlist item for people responsible for multiple PC's.

Thank You
-- 
Scotty Fitzgerald
---
A computer geek haiku for you...

Serious error.
All shortcuts have disappeared.
Screen. Mind. Both are blank.



-- Ian Hughes

--- End Message ---
--- Begin Message --- 
Version: 1.47

On Tue, Oct 24, 2006 at 08:57:35PM +0200, Geert Stappers wrote:
> Op 24-10-2006 om 14:38 schreef Scott Fitzgerald:
> > This is how it displays...
> > eth0: Ethernet or Fast Ethernet
> > eth1: nVidia Corporation CK804 Ethernet Controller
> 
> Could beside the non-default for firewire
> also the text be changed so that it indicates Firewire?

This has been fixed in version 1.47 of ethdetect. :)

Cheers,
-- 
Jérémy Bobbio                        .''`. 
lunar@debian.org                    : :Ⓐ  :  # apt-get install anarchism
                                    `. `'` 
                                      `-

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: