[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#279195: marked as done (issues when booting 2.4 to install 2.6)

Your message dated Sat, 18 Aug 2007 13:36:19 +0200
with message-id <20070818113619.GA15530@qamar>
and subject line Bug#279195: installation report (bug: CDROM not detected)
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports

INSTALL REPORT

Debian-installer-version: 27/10/2004 http://ftp.acc.umu.se/pub/cd-images/debian-weekly/ pre-rc2?
uname -a: Linux dione 2.6.8 #1 Sat Sep 4 18:05:26 CEST 2004 i686 GNU/Linux
Date: 30/10/2004
Method: How did you install?  From weekly CDROM images,
        What did you boot off?  CD#1

Machine: Dell Dimension XPS T600 
Processor:  Pentium III
Memory: 512Mb
Root Device: /dev/sda1
Root Size/partition table: 
	/dev/sda1               1         608     4883728+  83  Linux		/
	/dev/sda2             609         670      498015   82  Linux swap
	/dev/sda3             671        1278     4883760   83  Linux		empty
	/dev/sda4            1279        2213     7510387+  83  Linux		/pub

Output of lspci and lspci -n:
	0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
	0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
	0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
	0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
	0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
	0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
	0000:00:0d.0 Ethernet controller: 3Com Corporation 3c900 10Mbps Combo [Boomerang]
	0000:00:0e.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
	0000:00:0f.0 Ethernet controller: 3Com Corporation 3c900B-TPC Etherlink XL [Cyclone] (rev 04)
	0000:00:10.0 SCSI storage controller: Adaptec AHA-2940UW Pro / AIC-788x (rev 01)
	0000:00:11.0 SCSI storage controller: Adaptec AHA-2940U2/U2W
	0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 05)

	0000:00:00.0 0600: 8086:7190 (rev 03)
	0000:00:01.0 0604: 8086:7191 (rev 03)
	0000:00:07.0 0601: 8086:7110 (rev 02)
	0000:00:07.1 0101: 8086:7111 (rev 01)
	0000:00:07.2 0c03: 8086:7112 (rev 01)
	0000:00:07.3 0680: 8086:7113 (rev 02)
	0000:00:0d.0 0200: 10b7:9001
	0000:00:0e.0 0401: 1274:1371 (rev 06)
	0000:00:0f.0 0200: 10b7:9006 (rev 04)
	0000:00:10.0 0100: 9004:8778 (rev 01)
	0000:00:11.0 0100: 9005:0010
	0000:01:00.0 0300: 102b:0525 (rev 05)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [ ]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [E]

Comments/Problems:

When I got the very end of the install and rebooted into the base
system everything seemed fine. But already it wasn't. I continued
and when I got to the apt-based installation then I kept receiving
the CDROM wasn't detected (sorry, can't remember exact message) And
indeed if I tried to manually mount it then it failed. It seemed that
'ide-generic' had not been loaded because it wasn't in /etc/modules. I
modprobe'd it and added it and then reran the step and it was fine.

Install logs and other status info is available in /var/log/debian-installer/.

Okay, but I'm not attaching them - syslog is a bit big :-) I'll
keep the files, so if you want them, or more info, then just ask.

Alexis

--- End Message ---
--- Begin Message --- 
On Mon, Nov 01, 2004 at 12:56:46PM -0500, Joey Hess wrote:
> Alexis Huxley wrote:
> > I started with the (current) weekly CDROM images via bittorrent,
> > then when prompted for which kernel to install I selected the
> > newest non-SMP, non-AMD 686, which was 2.6.8.
> 
> Ok so you did the install using a 2.4 kernel and in expert mode, and
> manaully choose a 2.6 kernel. That could explain why it added the wrong
> module to /etc/modules, because it checks the running installer kernel.

As recent version of the debian-installer does not support 2.4 kernels
anymore, I am closing this (old) bug report.

Cheers,
-- 
Jérémy Bobbio                        .''`. 
lunar@debian.org                    : :Ⓐ  :  # apt-get install anarchism
                                    `. `'` 
                                      `-

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: