Bug#436340: Installation freezes during "configure the clock" step
Package: installation-reports
Boot method: CD
Image version: Lenny - Official Snapshot i386 NETINST Binary-1 20070802-9:34
Date: Tue Aug 7 02:08:07 CEST 2007
Machine: ACER Aspire 3023WLMi
Processor: Mobile AMD Sempron 3000+
Memory: 512MB
Partitions:
Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 1275 10241406 7 HPFS/NTFS
/dev/hda2 1276 7522 50179027+ c W95 FAT32 (LBA)
/dev/hda3 7523 9729 17727727+ f W95 Ext'd (LBA)
/dev/hda5 7523 7584 497983+ 82 Linux swap
/dev/hda6 7585 8496 7325608+ 83 Linux
/dev/hda7 8497 9729 9904041 83 Linux
Output of lspci -nn and lspci -vnn:
00:00.0 0600: 1002:5950 (rev 01)
00:02.0 0604: 1002:5a34
00:06.0 0604: 1002:5a38
00:07.0 0604: 1002:5a39
00:13.0 0c03: 1002:4374
00:13.1 0c03: 1002:4375
00:13.2 0c03: 1002:4373
00:14.0 0c05: 1002:4372 (rev 11)
00:14.1 0101: 1002:4376
00:14.3 0601: 1002:4377
00:14.4 0604: 1002:4371
00:14.5 0401: 1002:4370 (rev 02)
00:14.6 0703: 1002:4378 (rev 02)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:00.0 0300: 1002:5653
06:05.0 0280: 14e4:4318 (rev 02)
06:06.0 0607: 104c:8031
06:06.2 0c00: 104c:8032
06:06.3 0180: 104c:8033
06:06.4 0805: 104c:8034
06:07.0 0200: 10ec:8169 (rev 10)
00:00.0 0600: 1002:5950 (rev 01)
Subsystem: 1025:0080
Flags: bus master, 66MHz, medium devsel, latency 64
00:02.0 0604: 1002:5a34
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: c8000000-cfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
00:06.0 0604: 1002:5a38
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
00:07.0 0604: 1002:5a39
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
00:13.0 0c03: 1002:4374 (prog-if 10)
Subsystem: 1025:0080
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.1 0c03: 1002:4375 (prog-if 10)
Subsystem: 1025:0080
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
Memory at c0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.2 0c03: 1002:4373 (prog-if 20)
Subsystem: 1025:0080
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
Memory at c0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.0 0c05: 1002:4372 (rev 11)
Subsystem: 1025:0080
Flags: 66MHz, medium devsel
I/O ports at 8400 [size=16]
Memory at c0003000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping
00:14.1 0101: 1002:4376 (prog-if 8a)
Subsystem: 1025:0080
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 8410 [size=16]
Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.3 0601: 1002:4377
Subsystem: 1025:0080
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 0604: 1002:4371 (prog-if 01)
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0200000-c02fffff
Prefetchable memory behind bridge: 30000000-32ffffff
00:14.5 0401: 1002:4370 (rev 02)
Subsystem: 1025:0079
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17
Memory at c0003400 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.6 0703: 1002:4378 (rev 02)
Subsystem: 1025:0080
Flags: 66MHz, slow devsel, IRQ 17
Memory at c0003800 (32-bit, non-prefetchable) [disabled] [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:18.0 0600: 1022:1100
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 0600: 1022:1101
Flags: fast devsel
00:18.2 0600: 1022:1102
Flags: fast devsel
00:18.3 0600: 1022:1103
Flags: fast devsel
01:00.0 0300: 1002:5653
Subsystem: 1025:0080
Flags: fast devsel, IRQ 11
Memory at c8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 9000 [size=256]
Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
06:05.0 0280: 14e4:4318 (rev 02)
Subsystem: 1468:0311
Flags: bus master, fast devsel, latency 64, IRQ 10
Memory at c0204000 (32-bit, non-prefetchable) [size=8K]
06:06.0 0607: 104c:8031
Subsystem: 1025:0080
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at c020a000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=08, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 34000000-35fff000 (prefetchable)
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
16-bit legacy interface ports at 0001
06:06.2 0c00: 104c:8032 (prog-if 10)
Subsystem: 1025:0080
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c0208000 (32-bit, non-prefetchable) [size=2K]
Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
06:06.3 0180: 104c:8033
Subsystem: 1025:0080
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c0206000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
06:06.4 0805: 104c:8034
Subsystem: 1025:0080
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c0209000 (32-bit, non-prefetchable) [size=256]
Memory at c0208c00 (32-bit, non-prefetchable) [size=256]
Memory at c0208800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
06:07.0 0200: 10ec:8169 (rev 10)
Subsystem: 1025:0079
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
I/O ports at a000 [size=256]
Memory at c0209400 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 32000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [E]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Everything goes fine until clock configuration.
The installer freezes in the "Setting up the clock" part, when it tries to
get the time from a network time server. The progress bar reaches 100% and
nothing happens thereafter.
I've tried several times, both in normal end expert mode. It seems the
only solution is to boot in expert mode and avoid the NTP query.
I've unsuccesfully tried to:
- change the default NTP server;
- use a different pc (an old IBM pentium pro workstation).
Switching to log console, the last message is always:
<date> clock-setup: <date> rdate: adjust local clock by N seconds
A 'ps' shows the following processes still hanging around:
udpgk --configure --force-configure clock-setup
/bin/sh /var/lib/dpkg/info/clock-setup.postinst
Reply to: