Bug#405549: installation-reports: Also ATI Rage
Package: installation-reports
Followup-For: Bug #405549
My ATI Rage was also not configured after install -- gdm fails and X
reports no devices. Missing input and video drivers. ATI device is
configured as "agp". The desktop package doesn't seems to install the
correct driver or detect it I guess. Easy fix -- I added the video and
input tasks and ran dpkg-reconfigure xserver-xorg. xorg.conf was
correctly configured at this point though I had to specifically choose
the "ati" driver.
-- Package-specific info:
Boot method: cd
Image version: i386 daily netinst image (1/4/07) (RC1 also)
Date: <Date and time of the install>
Machine: Dell Inspirion 5000
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O ]
Detect network card: [O ]
Configure network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [O ]
Install base system: [O ]
Clock/timezone setup: [O ]
User/password setup: [O ]
Install tasks: [E ]
Install boot loader: [O ]
Overall install: [O ]
Comments/Problems:
Looking nice -- my laptop required the pcmcia exclude line to get the CD
running -- thanks for including that fix in the install process.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070105-15:51)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux ancfrtdeb1 2.6.18-3-486 #1 Sun Dec 10 18:57:11 UTC 2006 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03)
lspci -nn: 00:04.0 CardBus bridge [0607]: Texas Instruments PCI1225 [104c:ac1c] (rev 01)
lspci -nn: 00:04.1 CardBus bridge [0607]: Texas Instruments PCI1225 [104c:ac1c] (rev 01)
lspci -nn: 00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
lspci -nn: 00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
lspci -nn: 00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
lspci -nn: 00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
lspci -nn: 00:08.0 Multimedia audio controller [0401]: ESS Technology ES1978 Maestro 2E [125d:1978] (rev 10)
lspci -nn: 00:10.0 Communication controller [0780]: Agere Systems WinModem 56k [11c1:0448] (rev 01)
lspci -nn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility P/M AGP 2x [1002:4c4d] (rev 64)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
lspci -vnn: Flags: bus master, medium devsel, latency 64
lspci -vnn: Memory at e0000000 (32-bit, prefetchable) [size=64M]
lspci -vnn: Capabilities: [a0] AGP version 1.0
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03)
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 128
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -vnn: I/O behind bridge: 00002000-00002fff
lspci -vnn: Memory behind bridge: fc100000-fdffffff
lspci -vnn: Prefetchable memory behind bridge: 18000000-180fffff
lspci -vnn:
lspci -vnn: 00:04.0 CardBus bridge [0607]: Texas Instruments PCI1225 [104c:ac1c] (rev 01)
lspci -vnn: Subsystem: Dell Unknown device [1028:009f]
lspci -vnn: Flags: bus master, medium devsel, latency 168, IRQ 11
lspci -vnn: Memory at 18100000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
lspci -vnn: Memory window 0: 10000000-11fff000 (prefetchable)
lspci -vnn: Memory window 1: 12000000-13fff000
lspci -vnn: I/O window 0: 00001c00-00001cff
lspci -vnn: I/O window 1: 00003000-000030ff
lspci -vnn: 16-bit legacy interface ports at 0001
lspci -vnn:
lspci -vnn: 00:04.1 CardBus bridge [0607]: Texas Instruments PCI1225 [104c:ac1c] (rev 01)
lspci -vnn: Subsystem: Dell Unknown device [1028:009f]
lspci -vnn: Flags: bus master, medium devsel, latency 168, IRQ 11
lspci -vnn: Memory at 18101000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
lspci -vnn: Memory window 0: 14000000-15fff000 (prefetchable)
lspci -vnn: Memory window 1: 16000000-17fff000
lspci -vnn: I/O window 0: 00003400-000034ff
lspci -vnn: I/O window 1: 00003c00-00003cff
lspci -vnn: 16-bit legacy interface ports at 0001
lspci -vnn:
lspci -vnn: 00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
lspci -vnn: Flags: bus master, medium devsel, latency 64
lspci -vnn: I/O ports at 1050 [size=16]
lspci -vnn:
lspci -vnn: 00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 5
lspci -vnn: I/O ports at 1060 [size=32]
lspci -vnn:
lspci -vnn: 00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
lspci -vnn: Flags: medium devsel, IRQ 9
lspci -vnn:
lspci -vnn: 00:08.0 Multimedia audio controller [0401]: ESS Technology ES1978 Maestro 2E [125d:1978] (rev 10)
lspci -vnn: Subsystem: Dell Unknown device [1028:009f]
lspci -vnn: Flags: medium devsel, IRQ 5
lspci -vnn: I/O ports at 1400 [size=256]
lspci -vnn: Capabilities: [c0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:10.0 Communication controller [0780]: Agere Systems WinModem 56k [11c1:0448] (rev 01)
lspci -vnn: Subsystem: Actiontec Electronics Inc Unknown device [1668:2000]
lspci -vnn: Flags: medium devsel, IRQ 5
lspci -vnn: Memory at fc000000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: I/O ports at 1080 [size=8]
lspci -vnn: I/O ports at 1800 [size=256]
lspci -vnn: Capabilities: [f8] Power Management version 2
lspci -vnn:
lspci -vnn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility P/M AGP 2x [1002:4c4d] (rev 64)
lspci -vnn: Subsystem: Dell Unknown device [1028:009f]
lspci -vnn: Flags: bus master, stepping, medium devsel, latency 66, IRQ 11
lspci -vnn: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
lspci -vnn: I/O ports at 2000 [size=256]
lspci -vnn: Memory at fc100000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: [virtual] Expansion ROM at 18000000 [disabled] [size=128K]
lspci -vnn: Capabilities: [50] AGP version 1.0
lspci -vnn: Capabilities: [5c] Power Management version 1
lspci -vnn:
lsmod: Module Size Used by
lsmod: sd_mod 18832 0
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116104 1
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 0
lsmod: fat 45596 1 vfat
lsmod: 3c574_cs 12680 1
lsmod: nls_iso8859_1 4096 0
lsmod: isofs 31544 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: aec62xx 6656 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5392 0 [permanent]
lsmod: cmd64x 9884 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7684 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: opti621 3972 0 [permanent]
lsmod: pdc202xx_old 9344 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6528 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 10880 0 [permanent]
lsmod: sis5513 12296 0 [permanent]
lsmod: slc90e66 4992 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: floppy 51748 0
lsmod: usb_storage 70848 0
lsmod: scsi_mod 121352 2 sd_mod,usb_storage
lsmod: vga16fb 11148 0
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbhid 35552 0
lsmod: usbkbd 6656 0
lsmod: thermal 13320 0
lsmod: processor 23212 1 thermal
lsmod: fan 4740 0
lsmod: ide_cd 35360 0
lsmod: cdrom 32160 1 ide_cd
lsmod: ide_disk 14720 3
lsmod: generic 4996 0 [permanent]
lsmod: pcmcia 33468 1 3c574_cs
lsmod: firmware_class 9216 1 pcmcia
lsmod: uhci_hcd 19848 0
lsmod: parport_pc 31268 0
lsmod: parport 31816 1 parport_pc
lsmod: usbcore 108676 6 usb_storage,usbserial,usbhid,usbkbd,uhci_hcd
lsmod: psmouse 34312 0
lsmod: piix 9092 0 [permanent]
lsmod: ide_core 107248 30 ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,ide_disk,generic,piix
lsmod: yenta_socket 24332 4
lsmod: rsrc_nonstatic 11648 1 yenta_socket
lsmod: pcmcia_core 35856 4 3c574_cs,pcmcia,yenta_socket,rsrc_nonstatic
lsmod: evdev 8832 2
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 63564 420 63144 1% /dev
df: tmpfs 63564 420 63144 1% /dev
df: tmpfs 63564 420 63144 1% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part1 5471188 2348676 2844592 45% /target
free: total used free shared buffers
free: Mem: 127132 121944 5188 0 2772
free: Swap: 305192 55220 249972
free: Total: 432324 177164 255160
cardctl status: Socket 0:
cardctl status: 5.0V 16-bit PC Card
cardctl status: Subdevice 0 (function 0) bound to driver "3c574_cs"
cardctl status: Socket 1:
cardctl status: no card
cardctl ident: Socket 0:
cardctl ident: product info: "3Com", "Megahertz 574B", "B", "001"
cardctl ident: manfid: 0x0101, 0x0574
cardctl ident: function: 6 (network)
cardctl ident: Socket 1:
cardctl ident: no product info available
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 33: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 8
/proc/cpuinfo: model name : Pentium III (Coppermine)
/proc/cpuinfo: stepping : 1
/proc/cpuinfo: cpu MHz : 597.434
/proc/cpuinfo: cache size : 256 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
/proc/cpuinfo: bogomips : 1195.65
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0300-031f : pcmcia_socket0
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 04d0-04d1 : pnp 00:05
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1000-103f : 0000:00:07.3
/proc/ioports: 1000-1003 : ACPI PM1a_EVT_BLK
/proc/ioports: 1004-1005 : ACPI PM1a_CNT_BLK
/proc/ioports: 1008-100b : ACPI PM_TMR
/proc/ioports: 100c-100f : ACPI GPE0_BLK
/proc/ioports: 1010-1015 : ACPI CPU throttle
/proc/ioports: 1016-103f : motherboard
/proc/ioports: 1016-103f : pnp 00:05
/proc/ioports: 1040-104f : 0000:00:07.3
/proc/ioports: 1040-104f : motherboard
/proc/ioports: 1040-104f : pnp 00:05
/proc/ioports: 1050-105f : 0000:00:07.1
/proc/ioports: 1050-1057 : ide0
/proc/ioports: 1058-105f : ide1
/proc/ioports: 1060-107f : 0000:00:07.2
/proc/ioports: 1060-107f : uhci_hcd
/proc/ioports: 1080-1087 : 0000:00:10.0
/proc/ioports: 1400-14ff : 0000:00:08.0
/proc/ioports: 1800-18ff : 0000:00:10.0
/proc/ioports: 1c00-1cff : PCI CardBus #02
/proc/ioports: 2000-2fff : PCI Bus #01
/proc/ioports: 2000-20ff : 0000:01:00.0
/proc/ioports: 3000-30ff : PCI CardBus #02
/proc/ioports: 3400-34ff : PCI CardBus #06
/proc/ioports: 3810-381f : motherboard
/proc/ioports: 3810-381f : pnp 00:05
/proc/ioports: 3c00-3cff : PCI CardBus #06
/proc/iomem: 00000000-0009f3ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f400-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cffff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-07feffff : System RAM
/proc/iomem: 00100000-002773b9 : Kernel code
/proc/iomem: 002773ba-0030dc73 : Kernel data
/proc/iomem: 07ff0000-07fffbff : ACPI Tables
/proc/iomem: 07fffc00-07ffffff : ACPI Non-volatile Storage
/proc/iomem: 10000000-11ffffff : PCI CardBus #02
/proc/iomem: 12000000-13ffffff : PCI CardBus #02
/proc/iomem: 14000000-15ffffff : PCI CardBus #06
/proc/iomem: 16000000-17ffffff : PCI CardBus #06
/proc/iomem: 18000000-180fffff : PCI Bus #01
/proc/iomem: 18000000-1801ffff : 0000:01:00.0
/proc/iomem: 18100000-18100fff : 0000:00:04.0
/proc/iomem: 18100000-18100fff : yenta_socket
/proc/iomem: 18101000-18101fff : 0000:00:04.1
/proc/iomem: 18101000-18101fff : yenta_socket
/proc/iomem: a0000000-a0000fff : pcmcia_socket0
/proc/iomem: e0000000-e3ffffff : 0000:00:00.0
/proc/iomem: fc000000-fc0000ff : 0000:00:10.0
/proc/iomem: fc100000-fdffffff : PCI Bus #01
/proc/iomem: fc100000-fc100fff : 0000:01:00.0
/proc/iomem: fd000000-fdffffff : 0000:01:00.0
/proc/iomem: fd000000-fd3fffff : vesafb
/proc/iomem: fff80000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1412002 XT-PIC timer
/proc/interrupts: 1: 364 XT-PIC i8042
/proc/interrupts: 2: 0 XT-PIC cascade
/proc/interrupts: 3: 329474 XT-PIC pcmcia0.0
/proc/interrupts: 5: 3 XT-PIC uhci_hcd:usb1
/proc/interrupts: 6: 8 XT-PIC floppy
/proc/interrupts: 7: 47 XT-PIC parport0
/proc/interrupts: 9: 343 XT-PIC acpi
/proc/interrupts: 11: 3 XT-PIC yenta, yenta
/proc/interrupts: 12: 32324 XT-PIC i8042
/proc/interrupts: 14: 255169 XT-PIC ide0
/proc/interrupts: 15: 60808 XT-PIC ide1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 0
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 127132 kB
/proc/meminfo: MemFree: 5172 kB
/proc/meminfo: Buffers: 2772 kB
/proc/meminfo: Cached: 85368 kB
/proc/meminfo: SwapCached: 18140 kB
/proc/meminfo: Active: 58236 kB
/proc/meminfo: Inactive: 52668 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 127132 kB
/proc/meminfo: LowFree: 5172 kB
/proc/meminfo: SwapTotal: 305192 kB
/proc/meminfo: SwapFree: 249972 kB
/proc/meminfo: Dirty: 1044 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 21824 kB
/proc/meminfo: Mapped: 3996 kB
/proc/meminfo: Slab: 7176 kB
/proc/meminfo: PageTables: 296 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 368756 kB
/proc/meminfo: Committed_AS: 100688 kB
/proc/meminfo: VmallocTotal: 909008 kB
/proc/meminfo: VmallocUsed: 5536 kB
/proc/meminfo: VmallocChunk: 902800 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0011 Vendor=0002 Product=0007 Version=0000
/proc/bus/input/devices: N: Name="SynPS/2 Synaptics TouchPad"
/proc/bus/input/devices: P: Phys=isa0060/serio1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=mouse0 event1
/proc/bus/input/devices: B: EV=b
/proc/bus/input/devices: B: KEY=6420 0 70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: ABS=11000003
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: # No SMBIOS nor DMI entry point found, sorry.
/proc/fb: 0 VESA VGA
/proc/fb: 1 VGA16 VGA
/etc/directfbrc: no-hardware
/etc/directfbrc: bg-color=ffdcdad5
/etc/directfbrc: screenshot-dir=/var/log
/etc/directfbrc: disable-module=keyboard
/etc/directfbrc: disable-module=ps2mouse
/etc/directfbrc: #disable-module=linux_input
dfbinfo: (*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
dfbinfo:
dfbinfo: ---------------------- DirectFB v0.9.25 ---------------------
dfbinfo: (c) 2000-2002 convergence integrated media GmbH
dfbinfo: (c) 2002-2004 convergence GmbH
dfbinfo: -----------------------------------------------------------
dfbinfo:
dfbinfo: (*) DirectFB/Core: Single Application Core. (2006-12-04 07:06)
dfbinfo: (*) Direct/Memcpy: Using libc memcpy()
dfbinfo: (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 15816)...
dfbinfo: (*) Direct/Modules: suppress module 'keyboard'
dfbinfo: (*) Direct/Modules: suppress module 'ps2mouse'
dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 15817)...
dfbinfo: (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [../../../lib/fusion/reactor.c:853]
dfbinfo: (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence integrated media GmbH)
dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 15818)...
dfbinfo: (*) DirectFB/Input: SynPS/2 Synaptics TouchPad (2) 0.1 (convergence integrated media GmbH)
dfbinfo: (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (convergence integrated media GmbH)
dfbinfo: (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
dfbinfo:
dfbinfo:
dfbinfo: Screen (00) FBDev Primary Screen (primary screen)
dfbinfo: Caps: VSYNC POWER_MANAGEMENT
dfbinfo:
dfbinfo: Layer (00) FBDev Primary Layer (primary layer)
dfbinfo: Type: GRAPHICS
dfbinfo: Caps: SURFACE BRIGHTNESS CONTRAST SATURATION
dfbinfo:
dfbinfo:
dfbinfo: Input (00) AT Translated Set 2 keyboard (primary keyboard)
dfbinfo: Type: KEYBOARD
dfbinfo: Caps: KEYS
dfbinfo:
dfbinfo: Input (01) SynPS/2 Synaptics TouchPad (primary mouse)
dfbinfo: Type: MOUSE
dfbinfo: Caps: AXES BUTTONS
dfbinfo: Max. Axis: 1
dfbinfo: Max. Button: 2
dfbinfo:
==============================================
Installer status:
==============================================
Package: ttf-thai-tlwg-udeb
Status: install ok unpacked
Version: 1:0.4.5-2
Description: Thai fonts in TrueType format for D-I use
Package: pcmcia-storage-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-3-486-di, ide-core-modules-2.6.18-3-486-di, cdrom-core-modules-2.6.18-3-486-di, pcmcia-modules-2.6.18-3-486-di
Description: PCMCIA storage drivers
Package: acpi-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: acpi-modules
Depends: kernel-image-2.6.18-3-486-di
Description: ACPI support modules
Package: preseed-common
Status: install ok unpacked
Version: 1.24
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.33
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: sata-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: sata-modules
Depends: kernel-image-2.6.18-3-486-di, scsi-core-modules-2.6.18-3-486-di
Description: SATA drivers
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-9
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.09
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.23
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu
Package: ttf-khmeros-udeb
Status: install ok unpacked
Version: 3.10-3
Provides: ttf-installer
Description: Debian-Installer font for the Khmer language of Cambodia
Package: di-utils-shell
Status: install ok unpacked
Version: 1.42
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: scsi-common-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-3-486-di, scsi-core-modules-2.6.18-3-486-di, cdrom-core-modules-2.6.18-3-486-di
Description: Very common SCSI drivers
Package: ttf-dejavu-udeb
Status: install ok unpacked
Version: 2.13-1
Description: Vera font family derivate with additional characters
Package: di-utils
Status: install ok installed
Version: 1.42
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: firewire-core-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-3-486-di, kernel-image-2.6.18-3-486-di
Description: Core FireWire drivers
Package: floppy-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: floppy-modules
Depends: kernel-image-2.6.18-3-486-di
Description: Floppy driver
Package: ttf-cjk-compact-udeb
Status: install ok unpacked
Version: 1.8
Description: Shrinked CJK TrueType fonts for GUI d-i.
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.111
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: ttf-freefont-udeb
Status: install ok unpacked
Version: 20060501cvs-10
Provides: ttf-installer
Description: Freefont Sans fonts for the graphical installer
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre3-1
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.48
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: libgtk-directfb-2.0-0-udeb
Status: install ok unpacked
Version: 2.8.20-3
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libpango1.0-udeb (>= 1.14.5), libpng12-0-udeb (>= 1.2.8rel)
Description: The GTK+ graphical user interface library - minimal runtime
Package: udev-udeb
Status: install ok unpacked
Version: 0.103-1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: libpng12-0-udeb
Status: install ok unpacked
Version: 1.2.15~beta5-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: PNG library - minimal runtime library
Package: usb-serial-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-3-486-di, usb-modules-2.6.18-3-486-di
Description: USB serial drivers
Package: libnss-files-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-9
Description: GNU C Library: NSS helper for files - udeb
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-6
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libcairo-directfb2-udeb
Status: install ok unpacked
Version: 1.2.4-4
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libdirectfb-0.9-25-udeb, libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), zlib1g-udeb (>= 1:1.2.1)
Description: The Cairo 2D vector graphics library DirectFB build
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: gtk2-engines-udeb
Status: install ok unpacked
Version: 1:2.8.2-1
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0), libpango1.0-udeb (>= 1.14.7)
Description: theme engines for GTK+ 2.x in the Debian installer
Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: serial-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: serial-modules
Depends: kernel-image-2.6.18-3-486-di, pcmcia-modules-2.6.18-3-486-di
Description: Serial drivers
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: rootskel-gtk
Status: install ok unpacked
Version: 1.04
Depends: cdebconf-udeb, rootskel, mouse-modules, gtk2-engines-udeb
Description: Additions for graphical installs to skeleton root filesystem (debian-installer)
Package: cdebconf-udeb
Status: install ok installed
Version: 0.111
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.47), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: scsi-core-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-3-486-di
Description: Core SCSI subsystem
Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libpango1.0-udeb
Status: install ok unpacked
Version: 1.14.8-4
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libfreetype6-udeb (>= 2.2), libglib2.0-udeb (>= 2.12.0), zlib1g-udeb (>= 1:1.2.1)
Description: Layout and rendering of internationalized text
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: fb-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: fb-modules
Depends: kernel-image-2.6.18-3-486-di
Description: Frame buffer support
Package: load-cdrom
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.111
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: cdrom-core-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-3-486-di, scsi-core-modules-2.6.18-3-486-di, ide-modules-2.6.18-3-486-di
Description: CDROM support
Package: libfreetype6-udeb
Status: install ok unpacked
Version: 2.2.1-5
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: FreeType 2 font engine for the debian-installer
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0-1
Description: provides iso_3166.tab file
Package: pcmcia-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-3-486-di, firmware-modules-2.6.18-3-486-di
Description: Common PCMCIA drivers
Package: parport-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: parport-modules
Depends: kernel-image-2.6.18-3-486-di
Description: Parallel port support
Package: ttf-malayalam-fonts-udeb
Status: install ok unpacked
Version: 1:0.4.7.4
Provides: ttf-installer
Description: Free TrueType fonts for the Malayalam language
Package: kernel-image-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: ttf-farsiweb-udeb
Status: install ok unpacked
Version: 0.4.dfsg-5
Provides: ttf-installer
Description: Farsiweb TrueType fonts for the graphical installer
Package: floppy-retriever
Status: install ok unpacked
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.46
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: libexpat1-udeb
Status: install ok unpacked
Version: 1.95.8-3.4
Provides: libexpat1
Depends: libc6 (>= 2.3.6-6)
Description: XML parsing C library - runtime library
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.24
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: firmware-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: firmware-modules
Depends: kernel-image-2.6.18-3-486-di
Description: Firmware request modules
Package: archdetect
Status: install ok installed
Version: 1.46
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.47)
Description: Hardware architecture detector
Package: ttf-bpg-georgian-fonts-udeb
Status: install ok unpacked
Version: 0.3
Provides: ttf-installer
Description: BPG Georgian fonts for the graphical installer
Package: cdrom-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: cdrom-modules
Depends: ide-modules-2.6.18-3-486-di, cdrom-core-modules-2.6.18-3-486-di, kernel-image-2.6.18-3-486-di
Description: Esoteric CDROM drivers
Package: ide-core-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: ide-core-modules
Depends: kernel-image-2.6.18-3-486-di
Description: IDE support
Package: fat-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: fat-modules
Depends: kernel-image-2.6.18-3-486-di
Description: FAT filesystem support
Package: input-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: input-modules
Depends: kernel-image-2.6.18-3-486-di, usb-modules-2.6.18-3-486-di
Description: Input devices support
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.42
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-6
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: ttf-tamil-fonts-udeb
Status: install ok unpacked
Version: 1:0.4.7.4
Provides: ttf-installer
Description: Free TrueType fonts for the Tamil language
Package: usb-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: usb-modules
Depends: kernel-image-2.6.18-3-486-di
Description: USB support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.42
Description: Terminfo entries needed by newt/slang in debian installer
Package: libdirectfb-0.9-25-udeb
Status: install ok unpacked
Version: 0.9.25.1-5
Provides: libdirectfb-0.9-25
Depends: libc6 (>= 2.3.6-6), libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), libsysfs2-udeb, zlib1g-udeb (>= 1:1.2.1)
Description: direct frame buffer graphics - shared libraries
Package: hw-detect
Status: install ok installed
Version: 1.46
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.47
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: fontconfig-udeb
Status: install ok unpacked
Version: 2.4.2-1
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libexpat1-udeb (>= 1.95.8), libfreetype6-udeb (>= 2.2), zlib1g-udeb (>= 1:1.2.1)
Description: generic font configuration library - minimal runtime
Package: cdebconf-gtk-udeb
Status: install ok unpacked
Version: 0.111
Depends: cdebconf-udeb, libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0), libpango1.0-udeb (>= 1.14.8), rootskel-gtk (>= 0.05)
Description: Gtk+ frontend for Debian Configuration Management System
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: scsi-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: scsi-modules
Depends: kernel-image-2.6.18-3-486-di, scsi-core-modules-2.6.18-3-486-di, parport-modules-2.6.18-3-486-di, cdrom-core-modules-2.6.18-3-486-di, firmware-modules-2.6.18-3-486-di
Description: SCSI drivers
Package: env-preseed
Status: install ok unpacked
Version: 1.24
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.9
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.111
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.32
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.24
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: ttf-tmuni-udeb
Status: install ok unpacked
Version: 0.0.20040806-1.2
Provides: ttf-installer
Description: font for Tibetan, Dzongkha and Ladakhi (OpenType Unicode)
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: libglib2.0-udeb
Status: install ok unpacked
Version: 2.12.6-2
Depends: libc6 (>= 2.3.6-6)
Description: The GLib library of C routines
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.111
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: usb-storage-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-3-486-di, scsi-core-modules-2.6.18-3-486-di, usb-modules-2.6.18-3-486-di
Description: USB storage support
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: libatk1.0-udeb
Status: install ok unpacked
Version: 1.12.3-1
Depends: libc6 (>= 2.3.6-6), libglib2.0-udeb (>= 2.12.0)
Description: The ATK accessibility toolkit
Package: mouse-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: mouse-modules
Depends: kernel-image-2.6.18-3-486-di, input-modules-2.6.18-3-486-di, usb-modules-2.6.18-3-486-di
Description: Mouse support
Package: cdrom-detect
Status: install ok installed
Version: 1.18
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: ide-modules-2.6.18-3-486-di
Status: install ok unpacked
Version: 1.40
Provides: ide-modules
Depends: kernel-image-2.6.18-3-486-di, ide-core-modules-2.6.18-3-486-di
Description: IDE drivers
Package: debian-installer
Status: install ok installed
Version: cdrom-gtk-20070105-15:52
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.70
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.11
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-3-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 224
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.1
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.42
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.47)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.46
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: efi-modules-2.6.18-3-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: efi-modules
Description: EFI modules
This package contains EGI modules.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.8
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76
Package: ext3-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-15
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.7
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-9
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 72
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.12-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-3-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-7
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.24
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 3276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di, nic-shared-modules-2.6.18-3-486-di, firmware-modules-2.6.18-3-486-di, crc-modules-2.6.18-3-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di, nic-shared-modules-2.6.18-3-486-di, firmware-modules-2.6.18-3-486-di, firewire-core-modules-2.6.18-3-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 572
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di, nic-shared-modules-2.6.18-3-486-di, nic-extra-modules-2.6.18-3-486-di, pcmcia-modules-2.6.18-3-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di, nic-shared-modules-2.6.18-3-486-di, usb-modules-2.6.18-3-486-di, firmware-modules-2.6.18-3-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-3
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 62
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 100
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 50
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 876
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 11
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 19
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: save-logs
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.26
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: scsi-extra-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: scsi-modules-2.6.18-3-486-di, scsi-core-modules-2.6.18-3-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 300
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.14
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.8
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-3-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 240
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.18-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-3-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-3-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: kernel-image-2.6.18-3-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Reply to: