Bug#392095: installation on IBM eServer 326m
Package: installation-reports
Boot method: CD-ROM
Image version: Debian GNU/Linux testing "Etch" - Official Snapshot amd64 Binary-1 (20061009)
Date: 2006-10-10
Machine: IBM eServer 326m
Processor: Dual Core AMD Opteron(tm) Processor 285
Memory: 8164632 kB
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 reiserfs 2104376 1149668 954708 55% /
tmpfs tmpfs 4082316 8 4082308 1% /dev/shm
/dev/mapper/system-homelv
xfs 6281216 5088900 1192316 82% /home
/dev/mapper/system-tmplv
reiserfs 1048540 40580 1007960 4% /tmp
/dev/mapper/system-usrlv
reiserfs 5242716 1266452 3976264 25% /usr
/dev/mapper/system-varlv
reiserfs 3145628 114168 3031460 4% /var
Output of lspci and lspci -n:
0000:00:01.0 Class 0604: 1166:0036
0000:00:01.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge
0000:00:02.0 Class 0600: 1166:0205
0000:00:02.0 Host bridge: Broadcom HT1000 Legacy South Bridge
0000:00:02.1 Class 0101: 1166:0214
0000:00:02.1 IDE interface: Broadcom HT1000 Legacy IDE controller
0000:00:02.2 Class 0601: 1166:0234
0000:00:02.2 ISA bridge: Broadcom HT1000 LPC Bridge
0000:00:03.0 Class 0c03: 1166:0223 (rev 01)
0000:00:03.0 USB Controller: Broadcom HT1000 USB Controller (rev 01)
0000:00:03.1 Class 0c03: 1166:0223 (rev 01)
0000:00:03.1 USB Controller: Broadcom HT1000 USB Controller (rev 01)
0000:00:03.2 Class 0c03: 1166:0223 (rev 01)
0000:00:03.2 USB Controller: Broadcom HT1000 USB Controller (rev 01)
0000:00:04.0 Class 0300: 1002:515e (rev 02)
0000:00:04.0 VGA compatible controller: ATI Technologies Inc: Unknown device 515e (rev 02)
0000:00:06.0 Class 0604: 1166:0130 (rev a3)
0000:00:06.0 PCI bridge: Broadcom HT1000 PCI-X bridge (rev a3)
0000:00:07.0 Class 0604: 1166:0130 (rev a3)
0000:00:07.0 PCI bridge: Broadcom HT1000 PCI-X bridge (rev a3)
0000:00:08.0 Class 0604: 1166:0132 (rev a3)
0000:00:08.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
0000:00:09.0 Class 0604: 1166:0132 (rev a3)
0000:00:09.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
0000:00:0a.0 Class 0604: 1166:0132 (rev a3)
0000:00:0a.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
0000:00:0b.0 Class 0604: 1166:0132 (rev a3)
0000:00:0b.0 PCI bridge: Broadcom HT1000 PCI-Express bridge (rev a3)
0000:00:18.0 Class 0600: 1022:1100
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Class 0600: 1022:1101
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Class 0600: 1022:1102
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Class 0600: 1022:1103
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:0d.0 Class 0604: 1166:0104 (rev b2)
0000:01:0d.0 PCI bridge: Broadcom HT1000 PCI/PCI-X bridge (rev b2)
0000:01:0e.0 Class 0101: 1166:024a
0000:01:0e.0 IDE interface: Broadcom BCM5785 (HT1000) SATA Native SATA Mode
0000:01:0e.1 Class 0101: 1166:024a
0000:01:0e.1 IDE interface: Broadcom BCM5785 (HT1000) SATA Native SATA Mode
0000:02:03.0 Class 0100: 1000:0030 (rev 08)
0000:02:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
0000:03:02.0 Class 0c04: 1077:2312 (rev 02)
0000:03:02.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02)
0000:04:04.0 Class 0200: 14e4:166a (rev 03)
0000:04:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03)
0000:04:04.1 Class 0200: 14e4:166a (rev 03)
0000:04:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
This machine is connected to a SAN (IBM DS4300 701) via a qlogic controller
(QLA2312 Fibre Channel Adapter) that is not recognized. The kernel drivers
are qla2xxx and qla2300. But the SAN isn't proposed by the partitioner, so
I had to use locale disks.
Moreover, even when rebooted, the qla2xxx drivers did not load correctly
its firmware, giving an error.
BTW, installing on local disks went smootly. Network and USB are working
correctly. I did not check X11.
Bye,
Giuseppe
Reply to: