[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#371856: marked as done (cdrom-checker: fails even though md5sums are correct)

Your message dated Mon, 14 Aug 2006 18:47:12 -0700
with message-id <E1GCo1Q-00052t-0m@spohr.debian.org>
and subject line Bug#371856: fixed in cdrom-checker 1.08
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports

Boot method: etch beta 2 release netinst CD image
Image version: debian-31r2-i386-netinst.iso

Machine: generic PC
Processor: Celeron 600Mhz
Memory: 128MB
Partitions: Recommended single partition for beginners using the complete
hardisk

Output of lspci and lspci -n: can't do that, installation does not work

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [?]
Install boot loader:    [?]
Reboot:                 [E]

Comments/Problems:

1. Timezone selection didn't seem to let me choose for central European time
like sarge installer did.

2. Left select and install software which I left on the defaults. After
installation finished there was an error which was gone after the installer
retried installing everything again. Eventually it finished without errors
and rebooted resulting in a "boot failure" because the harddisk does not
seem to be bootable.

I'm an absolute beginner.
Installed sarge last week the same way without any such problems. I had to
use vim a couple of times though to get the Diamond Viper 550 to work with
something better than just VGA and to get the mouse wheel working on my
Genius Netscroll+ serial port mouse. But that was because i had no idea when
the installer asked me that serial is ttyS0, the Diamond Viper 550 has an
Nvidia RAGE TNT, the keyboard is a pc104 and my monitor IIama MF-8221
(Vision Master 21) has horizontal 25-85/vert 50-120. Everything worked fine,
later i even downloaded and installed the nvidia driver to get OpenGL
working too. But later when trying to upgrade from kernel 2.4 to 2.6 and
nvidia specifics stopped working and i could not get it to work again.
Requiring "testing" for nvidia legacy driver anyway, i thought it would be
simpler to download the etch beta 2 and hoping to get such options directly.
But i have not seen them, but maybe i would have if only the system would
boot.

If there is anything special you would like me to run on this system to
provide feedback, then just let me know. I'm used to computers for about 30
years now but this is my first time with Linux. Having seen a bit of Debian
so far with the above mentioned sarge installer last week, I'm actually
planning to run Debian only on some of my computers here.

Regards,

Pieter Roodnat

--- End Message ---
--- Begin Message --- 
Source: cdrom-checker
Source-Version: 1.08

We believe that the bug you reported is fixed in the latest version of
cdrom-checker, which is due to be installed in the Debian FTP archive:

cdrom-checker_1.08.dsc
  to pool/main/c/cdrom-checker/cdrom-checker_1.08.dsc
cdrom-checker_1.08.tar.gz
  to pool/main/c/cdrom-checker/cdrom-checker_1.08.tar.gz
cdrom-checker_1.08_i386.udeb
  to pool/main/c/cdrom-checker/cdrom-checker_1.08_i386.udeb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 371856@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Frans Pop <fjp@debian.org> (supplier of updated cdrom-checker package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.7
Date: Tue, 15 Aug 2006 02:30:26 +0200
Source: cdrom-checker
Binary: cdrom-checker
Architecture: source i386
Version: 1.08
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Frans Pop <fjp@debian.org>
Description: 
 cdrom-checker - Verify the cd contents (udeb)
Closes: 371856
Changes: 
 cdrom-checker (1.08) unstable; urgency=low
 .
   * Don't print extra newline as md5sum does not like that. Closes: #371856.
   * Remove standards-version and add Lintian override for it.
   * Add myself to uploaders.
 .
   [ Updated translations ]
   * Panjabi (pa.po) by A S Alam
   * Traditional Chinese (zh_TW.po) by Tetralet
Files: 
 17b30e872b98c430e986c93ffe11e533 671 debian-installer optional cdrom-checker_1.08.dsc
 431995cb9b0979c4e58058e575333717 56027 debian-installer optional cdrom-checker_1.08.tar.gz
 dc5036304fc3027a24dd2dd793435fa8 37986 debian-installer optional cdrom-checker_1.08_i386.udeb
Package-Type: udeb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)

iD8DBQFE4SOMgm/Kwh6ICoQRAiHrAKDXdR+vYSht9qxnk0uI71ztujvJkACfXPSv
dawqtP6FNrRDtrp4Qw9+q7M=
=oE6V
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: