[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#375968: marked as done (etch beta2 netboot fails on VIA VT310DP)

Your message dated Mon, 10 Jul 2006 11:11:12 +0200
with message-id <200607101111.12768.elendil@planet.nl>
and subject line Bug#375968: etch beta2 netboot fails on VIA VT310DP
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports

Boot method: netboot
Image version: etch beta 2 netboot, from http://ftp.nl.debian.org/debian/dists/testing/main/installer-i386/beta2/images/
Date: 20060629

Machine: VIA VT-310DP-based system
Processor: VIA Nehemiah
Memory: 1GB
Partitions: I wish I could get that far

Output of lspci and lspci -n:
nwp@blue:1389$ lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0259
0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1259
0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2259
0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3259
0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4259
0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7259
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10)
0000:00:0a.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3119 (rev 11)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
0000:01:00.0 VGA compatible controller: VIA Technologies, Inc.: Unknown device 3118 (rev 02)

nwp@blue:1389$ lspci -n
0000:00:00.0 0600: 1106:0259
0000:00:00.1 0600: 1106:1259
0000:00:00.2 0600: 1106:2259
0000:00:00.3 0600: 1106:3259
0000:00:00.4 0600: 1106:4259
0000:00:00.7 0600: 1106:7259
0000:00:01.0 0604: 1106:b198
0000:00:09.0 0200: 8086:1229 (rev 10)
0000:00:0a.0 0200: 1106:3119 (rev 11)
0000:00:0f.0 0104: 1106:3149 (rev 80)
0000:00:0f.1 0101: 1106:0571 (rev 06)
0000:00:10.0 0c03: 1106:3038 (rev 81)
0000:00:10.1 0c03: 1106:3038 (rev 81)
0000:00:10.2 0c03: 1106:3038 (rev 81)
0000:00:10.3 0c03: 1106:3038 (rev 81)
0000:00:10.4 0c03: 1106:3104 (rev 86)
0000:00:11.0 0601: 1106:3227
0000:00:11.5 0401: 1106:3059 (rev 60)
0000:00:12.0 0200: 1106:3065 (rev 78)
0000:01:00.0 0300: 1106:3118 (rev 02)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [E]
Configure network HW:   [ ]
Config network:         [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]

Comments/Problems:

default install image (2.6) hangs during boot. last line of output
is "io scheduler cfq registered".

install24 boots but USB keyboard is unusable to proceed further.

--- End Message ---
--- Begin Message --- 
On Monday 10 July 2006 10:33, Nick Phillips wrote:
> Yep, that's basically what I did, except for the moment I've used a
> custom kernel copied over on a USB key, but I'll try the standard one
> when I get a chance.

OK. Great. Let's close this report then as the issue was identified and is 
solved once 2.6.16 reaches testing.

> OK, will let you know - will probably try a reinstall fairly soon.

We are working on getting 2.6.16 into testing at the moment in preparation 
for a Beta 3 release of the installer. This may still take a few weeks 
though.

Thanks for your report and following up so promptly.

Cheers,
FJP

--- End Message ---
Reply to: