Bug#365844: installation report
Package: installation-reports
Boot method: external firewire cd
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso (from 5/3/06)
Date: 5/03/06 06:45
Machine: Xserve G5 cluster node (headless), external firewire, serial console only
Processor: Dual PowerPC970 (Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06)
Memory: 2GB
Partitions: none yet; testing installer bootability
Output of lspci and lspci -n: N/A
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Installer hangs at 'Trying to im_free nonexistent area (d0000800820d7000)'.
Possibly due to conflict between serial drivers. pmac_zilog needs
to manage the console on this model, but it is blocked by the 8250/16550 driver.
Console log:
Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06
Copyright 1994-2004 Apple Computer, Inc.
All Rights Reserved.
Welcome to Open Firmware, the system time and date is: 10:41:12 05/03/2006
To continue booting, type "mac-boot" and press return.
To shut down, type "shut-down" and press return.
ok
0 > dev fw ls
ff9f19f8: /node@00d04b3815067a2f
ff9f1bf0: /sbp-2@c000
ff9f1e38: /disk@0
ok
0 > devalias cd /ht/pci@5/firewire/node@00d04b3815067a2f/sbp-2@c000/disk@0 ok
0 > dir cd:,\
sbp2:Open ->login?
speed=ffffffff 2 2 -
Debian/PowerPC_etch
Size/ GMT File/Dir
bytes date time TYPE CRTR Name
1/ 1/ 4 0: 0: 0 .disk
1/ 1/ 4 0: 0: 0 dists
1/ 1/ 4 0: 0: 0 doc
1/ 1/ 4 0: 0: 0 etc
1/ 1/ 4 0: 0: 0 *install
52082 5/ 3/ 6 3: 4:56 ???? ???? md5sum.txt
1/ 1/ 4 0: 0: 0 pics
1/ 1/ 4 0: 0: 0 pool
1/ 1/ 4 0: 0: 0 ppc
10293 5/ 3/ 6 3: 4:23 ???? ???? README.html
72856 4/28/ 6 20:52:21 ???? ???? README.mirrors.html
39983 4/28/ 6 20:52:21 ???? ???? README.mirrors.txt
5327 5/ 3/ 6 3: 4:23 ???? ???? README.txt
1/ 1/ 4 0: 0: 0 tools
ok
0 > boot cd:,\install\yaboot
sbp2:Open ->login?
speed=ffffffff 2 2 load-size=248ec adler32=881546ed
Loading ELF
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2 Config file read, 1138 bytes
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2 \
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2 Welcome to Debian GNU/Linux etch!
This is a Debian installation CDROM,
built on 20060503.
The default option is 'install'. For maximum
control, you can use the 'expert' option.
If the system fails to boot at all (the typical
symptom is a white screen which doesn't go away),
use 'install video=ofonly' or 'expert video=ofonly'.
The plain options are for the powerpc family of
processors (from 601 to G4). The *64 options are for
64bit powerpc processors, which include the IBM
Power3, Power4, Power5, ... boxes, as well as the
Apple G5 boxes. Press the tab key for a list of
options, or type 'help' for help.
************************************
If in doubt, just choose 'install', and if that
doesn't work, try 'install video=ofonly'.
************************************
Welcome to yaboot version 1.3.13
Enter "help" to get some basic usage information
sbp2:Open ->login?
speed=ffffffff 2 2 boot:
* install expert install64
expert64
boot: expert64 video=ofonly console=ttyS0,57600 debug dobladecenter
Please wait, loading kernel...
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2 Elf64 kernel loaded...
Loading ramdisk...
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2
sbp2:Open ->login?
speed=ffffffff 2 2 ramdisk loaded at 01a00000, size: 3565 Kbytes
OF stdout device is: /ht@0,f2000000/pci@3/mac-io@7/escc@13000/ch-a@13020
command line: ro ramdisk_size=10240 DEBCONF_PRIORITY=low devfs=mount,dall init=/linuxrc -- video=ofonly console=ttyS0,57600 debug dobladecenter
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000001d7c000
alloc_top : 0000000030000000
alloc_top_hi : 0000000080000000
rmo_top : 0000000030000000
ram_top : 0000000080000000
Looking for displays
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000001e7d000 -> 0x0000000001e7e366
Device tree struct 0x0000000001e7f000 -> 0x0000000001e92000
Calling quiesce ...
DO-QUIESCE finishedreturning from prom_init
Hello World !
Page orders: linear mapping = 24, others = 12
Found initrd at 0xc000000001a00000:0xc000000001d7b5d5
Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35
Mapped at 0xd000080080000000
Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080041000
PowerMac motherboard: XServe G5
boot stdout isn't a display !
DART: table not allocated, using direct DMA
CF000100
MM Init
CF000100
MM Init Done
CF000012
Setup Arch
CF000015
Setup Done
Starting Linux PPC64 #2 SMP Tue Apr 25 15:26:45 CEST 2006
-----------------------------------------------------
ppc64_pft_size = 0x0
ppc64_interrupt_controller = 0x1
platform = 0x400
physicalMemorySize = 0x80000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0xc00000007c000000
htab_hash_mask = 0x3ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.16-1-powerpc64 (Debian 2.6.16-10) (waldi@debian.org) (gcc version 4.0.3 (Debian 4.0.3-1)) #2 SMP Tue Apr 25 15:26:45 CEST 2006
[boot]0012 Setup Arch
Top of RAM: 0x80000000, Total RAM: 0x80000000
Memory hole size: 0MB
Found U3-AGP PCI host bridge. Firmware bus number: 240->255
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
PCI Host 0, io start: 400000; io end: bfffff
PCI Host 1, io start: 0; io end: 3fffff
via-pmu: Server Mode is enabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=198, gen1=197
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
[boot]0015 Setup Done
Built 1 zonelists
Kernel command line: ro ramdisk_size=10240 DEBCONF_PRIORITY=low devfs=mount,dall init=/linuxrc -- video=ofonly console=ttyS0,57600 debug dobladecenter
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 120, shift: 7, mask: 7f
mpic: Initializing for 120 sources
mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs
mpic: ISU size: 124, shift: 7, mask: 7f
mpic: Initializing for 124 sources
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency = 33.333333 MHz
time_init: processor frequency = 2000.000000 MHz
Page orders: linear mapping = 24, others = 12
Found initrd at 0xc000000001a00000:0xc000000001d7b5d5
Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35
Mapped at 0xd000080080000000
Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080041000
PowerMac motherboard: XServe G5
boot stdout isn't a display !
DART: table not allocated, using direct DMA
Starting Linux PPC64 #2 SMP Tue Apr 25 15:26:45 CEST 2006
-----------------------------------------------------
ppc64_pft_size = 0x0
ppc64_interrupt_controller = 0x1
platform = 0x400
physicalMemorySize = 0x80000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0xc00000007c000000
htab_hash_mask = 0x3ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.16-1-powerpc64 (Debian 2.6.16-10) (waldi@debian.org) (gcc version 4.0.3 (Debian 4.0.3-1)) #2 SMP Tue Apr 25 15:26:45 CEST 2006
[boot]0012 Setup Arch
Top of RAM: 0x80000000, Total RAM: 0x80000000
Memory hole size: 0MB
Found U3-AGP PCI host bridge. Firmware bus number: 240->255
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
PCI Host 0, io start: 400000; io end: bfffff
PCI Host 1, io start: 0; io end: 3fffff
via-pmu: Server Mode is enabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=198, gen1=197
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
On node 0 totalpages: 524288
DMA zone: 524288 pages, LIFO batch:31
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
[boot]0015 Setup Done
Built 1 zonelists
Kernel command line: ro ramdisk_size=10240 DEBCONF_PRIORITY=low devfs=mount,dall init=/linuxrc -- video=ofonly console=ttyS0,57600 debug dobladecenter
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 120, shift: 7, mask: 7f
mpic: Initializing for 120 sources
mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs
mpic: ISU size: 124, shift: 7, mask: 7f
mpic: Initializing for 124 sources
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency = 33.333333 MHz
time_init: processor frequency = 2000.000000 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
freeing bootmem node 0
Memory: 2020836k/2097152k available (3392k kernel code, 76316k reserved, 920k data, 304k bss, 236k init)
Calibrating delay loop... 66.56 BogoMIPS (lpj=33280)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
smp_core99_probe
PowerMac SMP probe found 2 cpus
KeyWest i2c @0xf8001003 irq 128 /u3@0,f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
channel 0 bus <multibus>
PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
channel 1 bus <multibus>
channel 2 bus <multibus>
Processor timebase sync using Pulsar i2c clock
requesting IPIs ...
IPIs requested...
smp_core99_kick_cpu
smp_core99_kick_cpu done
Processor 1 found.
Brought up 2 CPUs
core99_setup_cpu 0 done
migration_cost=751
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 3565k freed
NET: Registered protocol family 16
Linux ppc64
#2 SMP Tue Apr 25 15:26:45 CEST 2006
PCI: Probing PCI hardware
Can't get ranges for PCI-PCI bridge /ht@0,f2000000/pci@1
mapping IO f0000000 -> d000080000400000, size: 800000
mapping IO f4000000 -> d000080000000000, size: 400000
PCI: Probing PCI hardware done
Registering pmac pic with sysfs...
nvram_init: Could not find nvram partition for nvram buffered error logging.
audit: initializing netlink socket (disabled)
audit(1146652975.040:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
vio_register_driver: driver hvc_console registering
HVSI: registered 0 devices
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
pmac_zilog: Error registering serial device, disabling pmac_zilog.
pmac_zilog: Did another serial driver already claim the minors?
Trying to im_free nonexistent area (d0000800820d7000)
Reply to: