[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#364718: marked as done (Package: installation-reports)

Your message dated Tue, 25 Apr 2006 11:33:39 +0200
with message-id <20060425093339.GL9326@djedefre.onera>
and subject line Bug#364718: Package: installation-reports
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports

Boot method: CD netinstall
Image version:
http://cdimage.debian.org/cdimage/etch_di_beta2/i386/iso-cd/debian-testing-i386-netinst.iso
(etch beta 2)
Date: 20/4/05

Machine: Dell 5150
Processor: Dual Intel P4 2.8GhZ
Memory: 512MB
Partitions: Allowed installer to configure with a seperate /home/
partition

Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub
(rev 02)
0000:00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics
Port (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corporation 945G
Integrated Graphics Controller (rev 02)
0000:00:02.1 Display controller: Intel Corporation 945G Integrated
Graphics Controller (rev 02)
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 (rev 01)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #3 (rev 01)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #4 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7
Family) Serial ATA Storage Controllers cc=IDE (rev 01)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus
Controller (rev 01)
0000:03:08.0 Ethernet controller: Intel Corporation 82801G (ICH7 Family)
LAN Controller (rev 01)

0000:00:00.0 0600: 8086:2770 (rev 02)
0000:00:01.0 0604: 8086:2771 (rev 02)
0000:00:02.0 0300: 8086:2772 (rev 02)
0000:00:02.1 0380: 8086:2776 (rev 02)
0000:00:1b.0 0403: 8086:27d8 (rev 01)
0000:00:1c.0 0604: 8086:27d0 (rev 01)
0000:00:1d.0 0c03: 8086:27c8 (rev 01)
0000:00:1d.1 0c03: 8086:27c9 (rev 01)
0000:00:1d.2 0c03: 8086:27ca (rev 01)
0000:00:1d.3 0c03: 8086:27cb (rev 01)
0000:00:1d.7 0c03: 8086:27cc (rev 01)
0000:00:1e.0 0604: 8086:244e (rev e1)
0000:00:1f.0 0601: 8086:27b8 (rev 01)
0000:00:1f.1 0101: 8086:27df (rev 01)
0000:00:1f.2 0101: 8086:27c0 (rev 01)
0000:00:1f.3 0c05: 8086:27da (rev 01)
0000:03:08.0 0200: 8086:27dc (rev 01)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [ O]
Configure network HW:   [O ]
Config network:         [ O]
Detect CD:              [ O]
Load installer modules: [O ]
Detect hard drives:     [ O]
Partition hard drives:  [ O]
Create file systems:    [O ]
Mount partitions:       [ O]
Install base system:    [O ]
Install boot loader:    [ O]
Reboot:                 [ O]

Comments/Problems:
Successful install apart from X stuff.
Worked really well until gdm attempted to launch. Then got error
?X: Xserver not found?
X packages were not installed so added xserver-common, xserver-xorg,
xfonts-base with aptitude
Booted gdm fine but could not ctrl-alt to shell logins (corrupted
graphics)
Reconfigured xserver-xorg to use the i810 driver (motherboard is i945)
instead of VESA now works fine
Thanks for the good work!

--- End Message ---
--- Begin Message --- 
> Successful install apart from X stuff.
> Worked really well until gdm attempted to launch. Then got error
> ?X: Xserver not found?
> X packages were not installed so added xserver-common, xserver-xorg,
> xfonts-base with aptitude
> Booted gdm fine but could not ctrl-alt to shell logins (corrupted
> graphics)
> Reconfigured xserver-xorg to use the i810 driver (motherboard is i945)
> instead of VESA now works fine


This is a current known problem with the X server packages to which
you found the right solution..:-)

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: