Bug#362761: install report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Debian 3.1r0a DVD iso image, deleted.
uname -a: Linux debian 2.6.8-2-686 #1 Thu May 19 17:53:30 JST 2005 i686 GNU/Linux
Date: 04., February, 2006., 18:28
Method: Installed from the first Debian3.1r0a DVD-iso.
Machine: IBM Desktop PC clone
Processor: Intel Celeron II. Coppermine 900MHz
Memory: 384MB
Root Device: IDE, /dev/hda
Root Size/partition table:
/dev/hda5 is the root partition.
Disk /dev/hda: 40.0 GB, 40027029504 bytes
16 heads, 63 sectors/track, 77557 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 40641 20482843+ c W95 FAT32 (LBA)
Partition 1 does not end on cylinder boundary.
/dev/hda2 40641 41135 249007+ 82 Linux swap / Solaris
/dev/hda3 * 41135 53280 6120765 83 Linux
/dev/hda4 53280 77552 12233497+ 5 Extended
Partition 4 does not end on cylinder boundary.
/dev/hda5 * 53280 65424 6120733+ 83 Linux
/dev/hda6 * 65424 77552 6112701 83 Linux
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
0000:00:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
0000:00:0c.0 USB Controller: OPTi Inc. 82C861 (rev 10)
0000:01:00.0 VGA compatible controller: S3 Inc. Savage 4 (rev 03)
0000:00:00.0 0600: 1106:0691 (rev c4)
0000:00:01.0 0604: 1106:8598
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 16)
0000:00:07.3 0c03: 1106:3038 (rev 16)
0000:00:07.4 0680: 1106:3057 (rev 40)
0000:00:09.0 0200: 10ec:8139 (rev 10)
0000:00:0b.0 0401: 1102:0002 (rev 07)
0000:00:0b.1 0980: 1102:7002 (rev 07)
0000:00:0c.0 0c03: 1045:c861 (rev 10)
0000:01:00.0 0300: 5333:8a22 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
The automatic installation halted and jumped to manually mode when the
ethernet device not founded. After select card all things worked correctly.
for 'Config network': Remembering the 3.0 installer was helpfulled. The fields
allways filled with 'default' or standard parameters. For example: 192.168.1.1
for default IP, or 192.168.1.x for default gateway.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: